8121/SAR-10/E8 REPAIR/MAINT OF WATER SUPPLY, SWIMMING POOL, PUMPS AND OTHER CONNECTED ITEMS AT AF STATION SARSAWA

Amount

Excavation in trenches in any type of soil i.e. loose/soft not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in width and getting out complete all as specified and as directed by Engineer-In-Charge.

All as per item No. 1 above but in hard/dense soil/cutting of road/hard standing/breaking of PCC etc complete all as specified and directed

Returning, filling and including spreading, leveling and watering and well ramming in layers not exceeding 25 cm to achieve desired compactness as directed by Engineer-In-Charge.

Removing of excavated material/soil to a distance not exceeding 50 Mtrs and depositing at a level not exceeding 1.5 Mtr above the starting point all as directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-1 ( using 20 mm graded stone aggregates) for repairing of valve chamber foundation etc including filling in road cuts/ hard standing etc all as specified and as directed.

Supply, laying, jointing and testing in replacement in trenches, galvanized iron water tubing of size 80mm bore medium grade including provision of all necessary ISI marked GI fittings / accessories complete all as specified and directed.

Supply, laying, jointing and testing in replacement in trenches, galvanized iron water tubing of size 50mm bore medium grade including provision of all necessary ISI marked GI fittings / accessories complete all as specified and directed.

Supply, laying, jointing and testing in replacement in trenches, galvanized iron water tubing of size 40mm bore medium grade including provision of all necessary ISI marked GI fittings / accessories complete all as specified and directed.

Supply, laying, jointing and testing in replacement in trenches, galvanized iron water tubing of size 25mm bore medium grade including provision of all necessary ISI marked GI fittings / accessories complete all as specified and directed.

Supply, laying, jointing and testing in replacement in trenches, galvanized iron water tubing of size 20mm bore medium grade including provision of all necessary ISI marked GI fittings / accessories complete all as specified and directed.

Supply, laying, jointing and testing in replacement in trenches, galvanized iron water tubing of size 15mm bore medium grade including provision of all necessary ISI marked GI fittings / accessories complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 50mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 40mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 25mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 20mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal gate valve 15mm with iron wheel head, both ends screwed for iron pipe complete all as specified and directed.

S&F in replacement of ISI Marked, of approved quality, Butter fly valve of size 80mm bore lever operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

S&F in replacement of ISI Marked, of approved quality, Butter fly valve of size 100mm bore lever operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

S&F in replacement of ISI Marked, of approved quality, Butter fly valve of size 150mm bore lever operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed for 100 mm bore sizes.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed for 150 mm bore sizes complete all as specified and directed

M&L for Cutting of the existing CI/DI pipe line for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including dewatering etc complete all as specified and directed for the 200mm bore of pipes complete all as specified and directed

M&L for Cutting of the existing CI/DI pipe line for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including dewatering etc complete all as specified and directed for the 150mm bore of pipes complete all as specified and directed

M&L for Cutting of the existing CI/DI pipe line for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including dewatering etc complete all as specified and directed for the 80/100mm bore of pipes complete all as specified and directed.

M&L for rubber gasket joints in flanged end cast iron pipes of size 200mm bore and fittings complete with welding grinding work and including minimum 3mm thick rubber/fibre gasket and replacement of nuts/bolts/washers complete including dewatering etc all as specified and directed

M&L for rubber gasket joints in flanged end cast iron pipes of size 150mm bore and fittings complete with welding grinding work and including minimum 3mm thick rubber/fibre gasket and replacement of nuts/bolts/washers complete including dewatering etc all as specified and directed

M&L for rubber gasket joints in flanged end cast iron pipes of size 80/100mm bore and fittings complete with welding grinding work and including minimum 3mm thick rubber/fibre gasket and replacement of nuts/bolts/washers complete including dewatering etc all as specified and directed

S&F GI fittings like union, dead plug, elbow, tee, socket, nipple of any size of required size complete all as directed. Make:- Unik

S&F in replacement of HDPE lowering pipe heavy duty of size 32/40 mm dia complete with safety wire all as specified and as directed.

Supply & Fix in replacement of Wall Mounted pump starter panel for pump capacity upto 40 HP star-delta system fully automatic with suitable contactors, timer, digital multifunction meter showing voltage, ammpere, KW, KWh, over load relay,suitable CTs, control MCBs (0-5 Amps) single phase preventor, relays, indicating lamps, push start/stop buttons, MCCB TPN incomer upto 100Amps 16KA, over/under voltage relay etc housed in powder caoted sheet metal enclosure 2.0mm thick with proper wiring, termination, ferruling, marking etc. Note:- starter Enclosure and switchgears like contactors, MCCBs shall be of same make.

M&L for MCCB 125 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :-L&T/ Legrand/ schneider

M&L for Power Contractor 3 pole 3 phase Standard coil voltage 240/415 V, 50 HZ, Auxiliary contacts 2 NO+ 2 NC, Current rating 50 Amps, MNX-A1. Make :-L&T/ Legrand/ schneider

M&L for single phase preventer model VSP 2, suitable to be fixed with FASD starter of any capacity for operation of the submerSI-ble pump motor, including taking out old U/S one. Make :- Minilec (VSP 2) /L&T/ Legrand

S&F flexible copper conductor multi strand heavy duty single core of size 4.0 sqmm complete.

S&F Electronic timer type :- ST 100 operating voltage 240/415 Volts, 50 Hz, time delay range 12-120 Sec/ 3-30 Sec suitable o be fixed with FASD starter of any capacity for operation of the submersible pump motor, including taking out old U/S one. Make :-L&T/ Legrand

S&F Digital Volt Meter (0-500V), including taking out old U/S one complete all as specified and as directed by Engr-in-charge. Make :- AE/ L&T / HPL

S&F Digital Amp Meter (0-60A)/ (0-100A)/(0-200A), including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :- AE/ L&T / HPL

S&F LED Indicating Light 240 VAC , 50 Hz, colour RYB -01 dia 22.5 mm including taking out old U/S one, complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand / schnieder/ L&T

S&F in replacement fixing of push button start / stop for submersible pump starter panel complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement fixing of capacitor of capacity 72 mfd to 120 mfd complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of MCB SP B series 6-32 Amps for submersible starter complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of contactor single phase of capacity 16 Amps for submersible starter panel complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of submersible starter panel for 1.0 Hp to 2.0 Hp pump set single phase 50Hz with voltmeter, ammeter, MCB, including lamps etc complete all as specified and as directed by Engineer-in-Charge. Make:- Havells/BCH/C&S

S&F in replacement of submersible three phase DOL starter panel for 3.0 Hp to 7.5 Hp pump set single phase 50Hz complete all as specified and as directed by Engineer-in-Charge. Make:- Havells/BCH/C&S

S&F in replacement of MCB TPN /Isolator 4Pole 63 Amps 16KA complete all as specified and as directed by Engineer-in-charge

S&F replacement of heating element upto 3KW with thermostat including connecting with electrical connections, complete all as specified and as directed by Engineer-in-Charge.

Supply, connection and testing of submersible cable copper conductor 3 core 1100 Volt grade 4 sq mm nominal cross sectional area including disconnecting the old u/s cable complete all as specified and directed by Engr-in-charge.

Supply, connection and testing of submersible cable copper conductor 3 core 1100 Volt grade 6 sq mm nominal cross sectional area including disconnecting the old u/s cable complete all as specified and directed by Engr-in-charge. Make:- Finolex/KEI/Havells

Supply, connection and testing of submersible cable copper conductor 3 core 1100 Volt grade 25 sq mm nominal cross sectional area including disconnecting the old u/s cable complete all as specified and directed by Engr-in-charge. Make:- Finolex/KEI/Havells

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting tolls , chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, column pipes of size 32/40 mm etc and transporting the defective pump motor set to workshop, lowering the same after repair/new pump or motor set to the existing location including replacing the rubber packing/ nut bolts of the column pipes etc of suitable size where ever required complete all as specified and as directed by Engr-in-charge.

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting tolls , chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, column pipes of size 100 mm etc and transporting the defective pump motor set to workshop, lowering the new / serviceable submersible pump motor set to the existing location including replacing the rubber packing/ nut bolts of the column pipes etc of suitable size where ever required complete all as specified and as directed by Engr-in-charge.

M&L for rewinding of submersible motor 30/35 HP with super enamelled copper wire as per existing complete all as specified and as directed by Engineer-in-Charge.

M&L for repair of submersible pump 30/35 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

M&L for rewinding of submersible motor upto 03 HP with super enamelled copper wire as per existing complete all as specified and as directed by Engineer-in-Charge.

M&L for repair of submersible pump upto 03 Hp including seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

Supply, fixing and testing of submersible electric driven pump only with operating head range -28-92 mtr, 14 stage LPM range 95-10, size 32X32mm suitable for 02 HP motor or as per ground sample of same head complete all as specified and as directed by Engr-in-charge. Make :- KSB/ Kirloskar / Crompton. (Taking out and lowering of pump motor set will be measured and paid separately).

Supply, fixing and testing of submersible electric driven pump only with outer dia of pump not exceeding 150 mm having discharge capacity 5 lps at 90 Meter head (operating head range -113-74 mtr) LPM 2075 of size 200mm suitable for 30 HP motor or as per ground sample of same head complete all as specified and as directed by Engr-in-charge. (Taking out and lowering of pump will be measured and paid separately).

M &L for connecting electric connections and testing submersible motor only capacity 30/35 HP 3 phase 415 volts, 50 HZ with outer dia of motor not exceeding 150 mm suitable to be coupled with pump as mentioned in item No. 58 hereinbefore or as per ground sample of complete all specified and as directed. (Taking out and lowering of pump will be measured and paid separately).

M&L for connecting electric connections and testing submersible motor only capacity 02 HP 1 phase 230 volts, 50 HZ with outer dia of motor suitable to be coupled with pump ground sample of complete all specified and as directed. (Taking out and lowering of pump will be measured and paid separately).

M&L for applying two coats of synthetic enamel paint to exposed surfaces of two coats painting to exposed complete Sewage treatment plant/pump house including CI/GI water pipe lines of header/suction/delivery of bore wells/ booster pumps any type/make/size including sluice valves, fittings and non return valves at water supply installations/steel gates as per specified colour code after cleaning and scraping out old paint including writing/marking complete all as specified and as directed by Engr-in-charge.

M&L for construction of brick masonry valve pit /chamber complete of size 900x900x900 (internal dimensions) and including necessary excavation & earth work in any type of soil complete all as specified and directed by Engr-in-charge.

M&L for Valve pit chamber cover in repair with 3mm thick MS chequered sheet cover including angle iron frame 40X40X6mm dully painted with locking arrangement of size upto1100x1100 mm (or any fabrication required at site) with PCC for fixing of the same complete all as specified and directed by Engr-in-charge.

S&F Motor protection automation phase sequence corrector panel suitable for upto 40 HP motor complete all as specified and directed by Engr-in-charge. Make: Sintrac / Universal Switch Gear Control / SUC.

Supply only in replacement of Chlorine test kit 0-2 PPM complete all as per existing.

Collection of water samples from various bore wells/sumps in sterilized bottles all as per the standard instructions and guidelines of the Chief Water Analyst of Department of water and Sewage examinations from IIT Rookee, transporting the samples safely and getting the same tested for chemical and bactyeriological tests, with and without chlorination test from the same Institute and report shall be submitted to this office complete all as specified and directed.

M&L for Lifting / Taking out the deffective Non Clogging Sewage Pump Submersible KRTU type of any make and desription from sewage sump by lifting Chain Pully etc all as required carefully by disconnecting / dismantling all electic connections, Column Pipe any size 80/100mm etc. and transporting the defectiv pump moter set to AGE E/M yard, lowring New Serviceable Pump Moter Set to the Existing Location including Replacing the Rubber Packing / Nuts Bolts of the Column Pipes , Valves etc of Suitable size complete all as specified and as directed by Engineer-in-Charge.

M&L for repair of non-clogging sewage submersible pump 20-30 Hp including rewinding, mechanical seals, bush, bearings impellers etc complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix in replacement water meter class A ISI marked flanged type of size 150mm bore with replacement of Nut, bolts & washers complete all as specified and as directed by Engineer-in-Charge. Make:- Kranti/Dasmesh

Supply, fixing and testing of non-clogging sewage submersible pump type KRTUK, - 100-260 /74 head 22.5m discharge 30 Cum /Hr, complete all as specified and as directed by Engineer-in-Charge. Make KSB model No. KRTU 100-260/74 /equivalent as specified in list of makes.

Supply & Fix in replacement of fountain submersible pump upto 01 Hp complete all as specified and as directed by Engineer-in-Charge.

Supply, fixing and testing of starter for non-clogging sewage submersible pump of capacity upto 20 HP with protection from over heating, over voltage/current, low water level complete all as specified and as directed by Engineer-in-Charge. Make KSB/equivalent as specified in list of makes.

Supply & Fix in replacement of FRP hypo-chlorine powder granules solution preparartion cum setting tank capacity 100 Ltrs with lid, port hole, inlet/outlet/drain connection level gauge etc and fitter speed reducing 3 phase 0.5HP motor with gear box and SS 316 agitator complete with wiring and sheet metal enclosure with MCB 0-32Amps TP including replacement guarantee for 01 year.

Supply & Fix in replacement of Decrin Dosing Pump, Pump Tube And White Suction 1 Decrin Dosing Pump, High Pressure Single Head Gear Motored Adjustable Dosing Pump With All Accessories with Pump Tube, injection check valve,foot valve, strainer etc - 02 Set spare, Make: Declibac Technologies Private Limited/ RAMCO

S&F in replacement of Pump tube for decrin dosing pump geared type of Make Declibac Pvt Ltd complete all as specified and directed.

S&F in replacement of suction/discharge tubing 3/8" white for decrin dosing pump geared type of Make Declibac Pvt Ltd complete all as specified and directed.

S&F in replacement of injection check valve 3/8" connection for decrin dosing pump geared type of Make Declibac Pvt Ltd complete all as specified and directed.

Supply only calcium hypo chlorite having at least 70% available Chlorine in granuales disinfectant in sealed container of 45 Kg white plastic drum for water treatment as directed by Engineer in charge. Note:- Contractor must be provided orginal manufacturing's test certificate with Hologram.

Supply only stand by water sewage pump etrena 1300-BW (1.75 HP), 50Hz, 220 Volt, protection class IP 68 delivery size 50mm, discharge range 60-270LPM incl 50 meter aluminium cable 4 Sqmm 2 core with starter and 10 Meter 50mm delivery pipe complete all as directed .

Supply only Cast Iron ratchet heavy duty pipe threading Die set for GI pipe 1/2"X3/4"X1" inches Complete all as specifed and directed.

Supply only Cast Iron ratchet heavy duty pipe threading Die set for GI pipe 1.1/4"X1. 1/2"X2" inches Complete all as specifed and directed.

M&L for fabricating LT panel board, single door made out of CRCA sheet 2.0 mm thick of size 1200 mm x 1200 mm pedestal type with four legs comprising Incommer 1 Nos x MCCB TPN 100 Amps 25KA & Outgoing 01 Nos MCCB TP 63 Amps 16KA & 02 Nos MCB SPN 40Amps, multifunction meter showing Voltage, ammpere, KWh frequency etc, indicating lamps for three phase display, including taking down old rusted panel board and embedded in suitable size PCC all as specified and directed. Note :- Panel & switchgears (MCCBs) shall be of same make. MCCBs shall be operated with front operated rotory switch without opening of door. Make:- Havell/Legrand/Siemens

S&F in replacement of LED aviation obstruction light yellow painted die cast aluminium alloy housing with 12W max consumption with all accessories complete all as directed

S&F Rigid PVC trunking/duct for cable management system of size 50X50mm double lock complete with all fitting all as specified and as directed. Make:- AKG

S&F Rigid PVC trunking/duct for cable management system of size 100X50mm double lock complete with all fitting all as specified and as directed. Make:- AKG

S&F in replacement of PVC conduit heavy duty of size 25mm complete with all fitting all as specified and as directed. Make: AKG premium

M&L for Repair/maintenance, excluding spares but including regular maintenance of the Automatic water supply system installed at Pump House No.1, 2, 3 & 4 including carrying out complete initial maintenance/serving/repairs as required of all the sub systems viz. PLC based control panels (with all the accessories) breakdown maintenance and replacement of unserviceable parts, refixing of old serviceable parts / new parts if any including the followings and all as specified and directed by Engineer-in-Charge

M&L for Repair/maintenance, excluding spares but including regular maintenance of 03 Nos. Pressure Switch i/e cleaning, greasing, checking for wear and tear, checking electrical termination, testing and Breakdown maintenance and replacement of unserviceable parts, refixing of serviceable parts / new parts if any testing, commissioning etc and all as specified and directed.

M&L for Repair/maintenance, excluding spares but including regular maintenance of 15 Nos. Sensor i/e cleaning, greasing, checking for wear and tear, checking electrical termination, testing and Breakdown maintenance and replacement of unserviceable parts, refixing of serviceable parts / new parts if any testing, commissioning etc and all as specified and directed.

M&L for Repair/maintenance, excluding spares but including regular maintenance of 06 Nos. Motorised Butterfly Valves of Size 80 mm to 150mm i/e cleaning, greasing, checking for wear and tear, checking electrical termination, testing and Breakdown maintenance and replacement of unserviceable parts, refixing of serviceable parts / new parts if any testing, commissioning etc and all as specified and directed. Notes for ser Item No. 88, 89, 90 & 91 :- (i) New parts if any required shall be measured and paid separately under respective items as supply only. Any other item required other than item mentioned in this CA, for making automation system operational, shall provided by the contractor at his own cost. Nothing extra shall be paid on this account. (iii) In addition to above specific emergency complaints from time to time shall be attended after receiving the same. (iv) The scope of work includes the our charges required for removing, repairing, refixing, carrying out electrical termination and fixing/installing, testing, commissioning, etc and all as directed.

Supply only and reprogramming in replacement of PLC (Programmable Logic Controller) with connected power supply system with controller lead complete as per existing model no. suitable for automation Slave panel.Make : Mitsubishi /Unitronics/Siemens

Supply and fixed in replacement of defected/ burn out /unsafe internal control wiring and connection for automation main master panel or automation slave panel installed at variours pump house for scada system as per existing system and including using by FR PVC insulated electric wire with copper conductor wiring having of single core of size 0.5 sqmm to 1.0 sqmm sub wiring as properly electrical connection for smooth controlling panel.

Supply only in replacement of relay pin type 4C/O , 220 -240Volt AC or as per exiting sample/ model no RU4S-A220.

Supply and only in replacement of relay pin type 4C/O , 24 Volt DC or as per exiting sample/ model no RU4S-D24.

Supply only in replacement of water level controller relay card 5 Levels type as per exiting sample/ size

Supply only in replacement of SMPS unit suitable for out put 24 volt DC and input 230 volt AC of rating 3 Amp as per exiting sample/ size

Supply only in replacement of step down tranformer as per existing size/ rating and suitable for oprating of automation slave panel

Supply only in replacement of electric supply converter from DC to AC as per existing size/ rating and suitable for oprating of automation slave panel

Supply only in replacement of unserviceable MCB TPN 6-10 Amps 415 Volts AC and making electrical connection

Supply only in replacement of buzzer system with base electrical connector as per existing size/type and suitable for showing to fault level of automation slave panel

Supply only in replacement of metalic body type resistor as per exiting sample/ size for actuator suitable for of size 80mm to 200mm dia butter fly valve.

Supply only in replacement of limit switch as per exiting sample/ size for actuator suitable for of size 80mm to 200mm dia butterfly valve complete all as specified and directed.

Supply only in replacement of hand wheel or as per exiting sample/ model for actuator suitable for of size 80mm to 150mm dia butterfly valve as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of electric motor suitable for actuator for 80 mm dia butterfly valve as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of electric motor suitable for actuator for 150 mm dia butterfly valve as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of mechanical gear box suitable for actuator for 80 mm dia butterfly valve as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of mechanical gear box suitable for actuator for 150 mm dia butterfly valve as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of pressure switch 0 -10 Kg/sq cm as per exiting sample/ size includingGI pipe and necessary fixing arrangment complete all as specified and directed.

Supply only in replacement of rust proof, maintenance free magnetic float switch / water level sensor as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of 5 pair of 0.5 mm dia armoured copper cable suitable for sensoring with suitable size of PVC conduit pipe as per exiting sample/ size duly fixed on wall of over head tank complete all as specified and directed.

Supply only in replacement of 6 Core 1.5 sq. mm PVC sheath PVC insulated copper armoured cable as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of 4 Core 1.5 sq. mm PVC sheath PVC insulated copper armoured cable as per exiting sample/ size complete all as specified and directed.

Supply only in replacement of 2 Core 1.5 sq. mm PVC sheath PVC insulated copper armoured cable as per exiting sample/ size. Make : complete all as specified and directed.

Reprogramming of Automation slave panels intalled at pump house no.1, 2, 3 & 4 for automation system as per existing system for smooth controlling panel complete all as specified and directed.

Supply only in replacement of ISI Marked, of approved quality, Butter fly valve of size 80mm bore gear operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

Supply only in replacement of ISI Marked, of approved quality, Butter fly valve of size 150mm bore gear operated CI complete with jointing and testing including cutting of exiting GI/CI/DI pipelines insertion of flanges, welding works if required complete all as specified and directed.

Supply only pipe wrenches of size 24" (23cm), 18" (25cm), 14" (28cm), 12"(33cm) & 10"(30cm) complete 05 nos wrenches. Make:- Stanley/Taparia complete all as specified and directed.

Supply only chrome vandium steel combination spanner set maxi drive system (12 Pieces) of size 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm, 19mm, 22mm complete one end of its open and one end of its ring type. Make:- Stanley/Taparia complete all as specified and directed.

Supply only cast iron pipe vice 1/2" to 2" (50mm) complete with wooden leg of length 1.25RM complete all as specified and directed.

Supply only Electric chain hoist (chain pulley) blocks with lifting height capacity 06 mtrs & load capacity 03 ton complete with all accessories like slings 03 meter length. Make:- Indef/Hindustan complete all as specified and directed.

Supply only Tripod for chain pulley made with 50mm bore GI medium grade pipe with vertical legth 06 RM complete all as specified and directed.

Supply, laying and connecting, jointing testing in replacement Pipe ductile Iron, S/S including joints and specials/fittings Class *K-7* supplied and laid complete 100 mm (4") dia complete all as specified & directed by Engineer-in-Charge

Supply and lay connecting, jointing testing in replacement Pipe ductile Iron, S/S including joints and specials/fittings Class *K-7* supplied and laid complete 150 mm (6") dia complete all as specified & directed by Engineer-in-Charge Note:- 1. The contractor shall apoint a supervisor to take daily complaints from complaint cell. 2. The contractor shall provide skilled technician and labours as and when required for rectification of complaints within the time frame provided by JE/Engineer-in-charge. 3. In case any complaint is not rectified within the time frame given by Engineer-in-charge penalty @ Rs 200 per hour upto 24 Hours delay and then @ Rs. 2000 per day shall be deducted from contractor's dues. 4. All stationary required for comlplaint management shall be provided by the contractor. If any extra item/spare required for fixing of all items mentioned in sch, that shall be arranged by the contractor at his own cost.

Baliyan Electrical Works

SHRI RAM ENTERPRISES

VIJAY ENTERPRISES

S C BUILDERS