Refurbishment of Existing Compactor Vehicle to 10KL Super Sucker Machine 1no Vehicle No TN 59 BA 1855

Amount

Towards the cost TANK: Total Tank capacity: 10000 Liters, Material: IS 2062 Grade 'B' – 6mm thick plates, Construction: Cylindrical, shell with tori spherical dished ends, tank built to Max. Operating Pressure:0.9 to 1 bar @ Pressure, Tank Testing Pressure: 1.5 Bar, SUCTION UNIT: Cooling Air injection Cooling Vacuum Pump make: Moro or Jurop Make, free air flow rating -2600 (cu.m/hr Pressure 1.5 Bar Absolute Max Vacuum 93%, LPM: Free air capacity 43000 LPM Liters/Min,Maximum Vacuum - 95%,Max. Pressure - 1.5 bar, Continuous Duty Pump, Mechanical Drive: For suction pump PZB/VAS/Equivalent make for Full torque Split shaft PTO fitted between vehicle gearbox and differential in proper manner, Silencer: Silencer Should be Provided, Rear Door: Shinned dish end with knuckle radius Door Locking Manual Screw Type Locking, manually operated openable rear door for cleaning purpose having airtight heavy duty imported Seals. hydraulically Openable Rear Door, Rear Suction & Discharge Valve: 4 Inch Lever operated Ball Valve with High Quality Seals, Accessories Sludge Level indicator Acrylic Tube Type Compound Gauge 100mm Dial Quick Coupler Imported Italian make Pressure Relief Valve: Molex/ Mistral make heavy duty spring type adjustable pressure relief valve is fitted to safeguard the tank from excess pressure creating inside the tank, Secondary / safety filter: Jurop (or) equivalent to that - Air filter should be provided to the inlet of the suction pump to prevent water / slurry entering into the pump. Suction Pipe with Coupling: 3 nos of 15 ft PVC suction hose of 4” Dia with Bauer coupling 3 sets. Compound Gauge: Pressure Range (0 - 1 Bar) Vacuum Range (0- 760mm Hg), Sludge Level Gauge: 3" diameter top two thirds acrylic sight glass in sludge compartment with cleaning and Rodding access plates. Including Battery and FIP Overhauling and Head & Engine Overhauling, Clutch replacement Gear box work, Paintings: one coat of Epoxy primer and Painting with two coats of anticorrosive paint as per the specified colour and printing the lettering as per the direction of the departmental officers. as per our standard specifications, would be… The mentioned rate is including of old body of the Existing Chassis.(Including GST 18% )

ABT INDUSTRIES LIMITED (BID ID -1269676)