GE (W)/HSR-31/2023-24 SPL REPAIR TO COOK HOUSE BLDG NO P-149, P-150, P-151 OF 2 GUARDS AT HISAR MIL STATION UNDER GE (W) HISAR

Amount

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor, aprones laid, bedded and pointed in any morter etc complete all as specified and directed.

M&L for 20 to 25mm thick machine cut Kota stone (550x550mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed

M&L, 20mm thick granite stone slabs BLACK colour over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete including dismantling old stone /tiles fixed in any mortar and removing from site complete all as specified and directed

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified complete.

M & L, vitritfied ceramic tiles 10mm thick (square or rectangular) polished area of each tile exceeding 0.42 sqm but not exc 1.00 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick cement sand screed in CM 1:4 complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided complete

Removing all disintregated and loose concrete of any thickness incl plaster if any in RCC Colmn, Chajjas, Slabs, Beams, Lintels etc, removing all loose rust/scale from exposed reinforcement bars by using wire brushes and sand paper incl cleaning of exposed surfaces of reinforcemnet with protective anti corrosive epoxy bonding chemical (Mate Pidilite) and tide reinforcement bars/IRC fabric 50mm x 50mm x 12 gauge if reqd to reinforcement concret boind primer to exposed surfaces and applying cement moter 1: 3:4 with MPC (one part cement 3 part send : 1 part 6mm course aggregate) 2 and average thikness note less than 20mm incl IRC 50mm x50mm)x 12mm gauge or reinforcement bars in the revoving debris all as specified and directed by EIC (Note : Upto the hight of 3(Three) storey building incl necessory scafolding to execute the work and IRC 50mmx50mmx12 guage or reinforcement bars shall be paid separatly)

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. etc complete all as specified.

M&L, 15mm thick rendering in CM 1:4 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. etc complete all as specified.

M&L, 10mm thick rendering in CM 1:3 to brick/conc ceiling surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed

M&L preparing new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed

M & L two coat of oil bound distemper on new plastered surfaces of wall over a coat of primer including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L one coat of oil bound distemper on old or new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L two coat of weather coat paint over a coat of primer on new surfaces of walls including preparation of surfaces completeall as specified and directed by Engineer - in - Charge .

M & L one coat of weather coat paint on old or new surfaces of walls including preparation of surfaces completeall as specified and directed by Engineer - in - Charge .

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

Dismantling water tanks , open or closed, in position and removing to store of capacity exc 500 ltr but n.exc 1000 ltr.

S&F rotational moulded polyethylene water storage tanks (tripple layer White in colourcylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc fixed in repairs complete all as specified and directed

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames)

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames)

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed

S & F 2nd class HW 35mm thick panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed

S&F 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a).

S&F Factory made mild steel window with side hung shutter (Box type) without glazing bars to receive wire guage, dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S&F Factory made mild steel window with Top hung shutter (Box type) with to receive glass dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed

S & F in repair Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters including necessay arrangements like welding etc complete.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size

S&F in repair aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size

S/F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long

S/F in repair Extruded aluminium alloy handles, fabricated type, anodised 125 mm long for cup boards and PVC doors.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane

Hacking out old broken glass (any thickness, size, quality or description)from Metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165.

S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces complete all as specified and directed.

Supply&Laying of CPVC pipe, SDR 11 ,20mm outer dia & fittings on walls/ceiling or laying in floors complete all as specified.including taking down old pipe complete all as specified and directed

S&F Brass Elbow for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S & F Stainless steel 25 mm dia drapery rod, decorative type, with PVC coating and fixed in repairs complete all as specified and directed.

S & F Stainless steel Bracket and Dooms, decorative, superior quality, suitable for 25 mm dia drapery rods, all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ® 15mm chromium plated cast copper alloy bib taps fixed in repair.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule.

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule.

S&F PVC floor trap 110mm fixed in repair complete all as specified and directed

S&F Grating round 110 mm size of PTMT with hole or without hole fixed in repair complete.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore fixed in repairs complete.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm

S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand, wast coupling, including waste pipe complete all as specified and directed

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding and flush pipe)and WC Connector with leaping ring connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified.

S&F in repair, PVC L/L cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete including all as specified.

M&L RCC in nominal mix , TypeB0 1:2:4 Type B1 1:2:4 (12.5mm graded) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, include necessory form work complete all as specified and directed

M&L mild steel TMT bar 6 to 8mm dia, cut to length bend to shape, hooping for ends, binding with and including MS wire not less than 0.9mm dia complete all as specified and directed

M&L mild steel TMT bar 5 to 10mm dia, cut to length bend to shape, hooping for ends, binding with and including MS wire not less than 0.9mm dia as in stirups spacers complete all as specified and directed

M&L for Flush pointing to bricks laid flat of brick tile over roof or ashlar masonry or concrete block walling in cement morter (1:3) complete, including Haking out/ Taking out old pointing complete.

S&F Powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing, chanels for sliding track etc. complete all as specified.

S&F prelaminated PVC solid board, 18/19 mm thick prelaminated on one side with decorative choice laminated & other balancing while laminated including pasting with solvent chemical as required at site or fixed with screw, complete as in kitchen shelves/partition shutter etc incl necessary brass handle,hinges,locking and fixing arrangement on wall complete all as specified and directed.

S&F Stainless steel Kitchen Chimmini 1.5m x 1.00 m in opening with 1.00mm thick stainless steel sheet, with electrical operated wall mounted type include fixed in position, necessory angering, all cutting opening, angering, finishing complete all as specified and directed.

M&L MS Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. Including dismantling old AC/CGI or any patteren old sheet and removing from site.

S&F 40mm dia CPVC pipe as in waste pipe complete all as sfd

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints fixed to walls/ trenches Completed all as directed.

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints fixed to walls / trenches Completed all as directed.

S&F, PVC Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed

Taking down eves gutter of RWP of any description complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete and directed by engr in charge

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified

All as per item No 80.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board

All as per item No 80.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board

All as per item No 80.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings with LED bulb 9 Watt complete all as specified and directed

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed

S&F modular fan step regulator 120W-2 module suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

S&F i Sheet metal enclosure distribution board VTPN,6way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed

Supply and fixing MCCBs FP 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCCB should be the same as that of DB

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Dismantling of Brick tiles or terracing tiles, single layer on roof and removing as directed.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part there of)

M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding, levelling course and the like finish even and fair 50mm average thickness or as required at site including preparation of RCC roof surface (old or new) with wire brush, drying and cleaning top remove loose particles, filling the cracks by crack filler complete all as specified and directed.

M&L applied a coat of bituminious primer confirming to [email protected] per Sqm, APP BASED POLYMERIC Memberane no less than 3mm thick. Weighing not less than 3 kg/M2, reinfoced with polyster non women febric(Weighning not less than 15 Gm/Sqm) and upperside of memberane themally insulated with white mineral gravel finish, uniformally embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75mm and end slab shal be 100mm and all over laps and joints shal also be sealed by torch application including one coat or bituminous aluminium paint all as specified and directed.

M/S D.N Choudhary

B B BUILDERS

NAVIN KUMAR

Puja Traders

Siya constructions

M/s Rao Constructions, 1173 Urban Estate-II, Hisar

RAJPAL SINGH CONSTRUCTIONS

M/S RAJESH KUMAR & SONS