SPECIAL REPAIRS TO OFFICER MARRIED ACCOMODATION (BLDG NO SP 23B) AT MIL STN KANKINARA UNDER GE (N) KOLKATA

Amount

Dismantling of wall and ceiling boards ( fibre , pulp ,insulation etc) or insulation boards /slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fix anodized aluminium snap grid frame work (size of grid 600x600mm) for false ceiling including suspenders / hangers 6mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof sheds by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and directed.

Supply & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595 X 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85%(min) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick(galvanized @ 120 gms per sqm including both sides) comprising of main T runners of size 15X 32 mm of length 3000mm, cross-T of size 15X32 mm of length 1200mm and secondary intermediate cross T of size 15X32mm of length 600mm to form grid module of size 600mm X 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shaped level adjuster of size 85X25X2mm. Galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm c/c and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the engineer-in-charge (with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles) complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply & Fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply & Fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws as specified(600mm girth) complete all as specified and directed.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed.

M&L for 20mm thick granite work of any type (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and as directed.

Supply and fix in repairs stainless steel sink with drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 x 460 mm with bowl size 405 x 355 x 178mm or 410 x 357 x 178mm complete all as specified and directed. (Model No.BSSBSD-52 of Blue Star or SBSD 05 of Joyna.)

Supply and fix in repair stainless steel kitchen plate rack of size 24''x36''x10'' complete all as specified and as directed. (Model No.KPR-312 of Blue Star or P-336 of Prayag.)

Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads as required complete all as specified and directed.

Supply and fix in repair fancy type drapery curtain rod bracket complete all as specified and directed.

Supply and fix in repair brass chromium plated curtain rods of 20mm dia complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.

Taking down chowkahts of frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed.

All as per Item No-16 above but exc. 1.50 and n.exc. 4 Sqm complete all as specified and directed.

Supply and fix pressed steel door frame of size 105 x 60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed.

All as per Item No-18 above but of size 165 X 60 mm complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregates) for filling concrete in pressed steel door frame complete all as specified and directed.

M&L for preparing surfaces of woods and wood based materials, steel and iron work, new or old, of any description and grith, not otherwise described, and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, area n exc 0.1 sq. m each, complete all as specified and directed.

Supply and fix small fittings such as window/doors stoppers brackets of any type, made out of 2nd class hard wood article n.exc. 200 cu cm each complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.

Supply and fix 30mm thick 2nd class hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and directed.

Supply only 100 mm size butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and directed.

Supply and fix factory made PVC cup board frame of size 75 mmX40 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick plain colour PVC Sheet reinforced with 15mm X15mm MS square tube of 19 gauge thickness throughout the frame and mitred cut at two corners and jointed with 2 Nos of 150 mm long brackets of 10mmX10mm MS square tubes. The door frame shall be fixed to the wall using 65/100 mm long MS screws through the frame by using PVC fastners . A minimum of 4 Nos of screws to be provided for each vertical member and minimum of 2 Nos of screws to be provided to horizontal member complete all as specified and as directed.

Supply and fix factory made PVC Cup board shutter of 25 mm thick consisting of frame madeout of MS tubes of 19 gauge thickness of size 15 mmX15 mm covered with 5 mm thick PVC 'C' channel of size 25 mm X 50 mm forming stiles, top and bottom rails. Panelling of 5 mm thick plain colour PVC sheet fitted in the MS frame welded/ sealed to the stiles and rails with 25 mm wide X 5 mm thick PVC sheet beading on either side and joined together with solvent cement adhesive. An additional 5 mm thick PVC Strip of 20 mm width is to be stuck on the interior side of the 'C' channel using PVC solvent cement adhesive etc. prelam colour complete all as specified and as directed.

Supply and fix 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix aluminium handle cast type, anodised, 100mm long complete all as specified and as specified and as directed.

Supply and fix aluminium handle cast type, anodised, 150mm long complete all as specified and as specified and as directed.

Supply and fix 150mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified & directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass from metal frame complete all as specified & directed.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work complete all as specified and as directed.

Supply and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm), window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm), Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories for area not exceeding 2.00 sqm each complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply and fix in repair brass chromium plated tubular towel rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified & directed.

Material and labour for applying one coat of synthetic enamel paint on steel surface of any description over 10cm widht or girth including preparation of old painted surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall with alkali resistant primer, and applying two coats of Anti fungal paint white or coloured by Auto Roller, including necessary scaffoldings complete all as specified and directed as per manufacturers instruction complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall by applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or colored by Auto Roller complete all as specified and directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 20 mm thick rendering with CM (1:4) in two layer, 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finishing the surface even and smooth w/o using extra cement complete all as specified and as directed. Note: Water proofing liquid admixture shall be measured and paid seperately.

Taking down rain water pipe in any size or pattern including all fittings bends/ shoes etc. complete all as specified and directed.

Supply and fix PVC (SWR) rain water pipes 110 mm bore type 'A' single socketed in any length with rubber ring joint fixed to walls with and including PVC brackets complete all as specified and directed.

S&F PVC (SWR) vent cowl complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, complete all as specified and as directed.

All as per item No. 50 above but 20mm bore complete all as specified and directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and directed.

All as per item No. 52 above but 20mm bore complete all as specified and directed.

Supply and fix in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

Supply and fix in repairs 15mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butter fly handle complete all as specified and as directed.

Supply and fix in repair stop cock 15mm bore fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in repair pillar tap of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix in repair Vitreous china wash down water closet pan(wall mounted), semi pedestal pattern (Anglo Indian Type), white including plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for Anglo Indian Type pedestal pan (excl flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix in repairs vitreous china wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain and plug and porcelain stopper etc. complete all as specified and directed.

Supply and fix in repair 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks (multi layered) 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed including taking down old unserviceable one complete all as specified and directed.

Supply and fix in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair chormium plated hand shower 105mm dia round shape single flow with air effect (ABS body and face plate chrome plated with rubit cleaning system) for fixing to 15 mm bore pipe complete all as specified and as directed. (Model No. HSH-1717 of Jaquar/ Equivalent Model of Makes specified in PS here-in after)

Supply and fix in repair towel ring of PTMT fixed with and including chromimum plated brass screw and wooden/plastic cleats (Minimum wt 90 gms) complete all as specified and directed.

Supply and fix corner shelf of ABS plastic fixed with and including chromimum plated brass screw complete all as specified and directed.

Supply and fix in repair soap dish, stainless steel and fixed in position complete all as specified and directed.

Supply and fix in repair health faucet ABS body with wall hook and 1-metre, stainless steel and fixed in position complete all as specified and directed.

Supply and fix in repairs brackets for WHB and Sink made out of 20mm bore GI pipe, medium grade, 600mm long and embeded into the wall with PCC (1:3:6) type C1 (using 20mm graded stone aggregates) complete all as specified and directed.

M&L for pre polished chequered cement concrete tiles 30cmx30cm25mm thick over 20mm thick screed bedding layer of mortar in CM (1:6) for laying floor finishes set jointed with grey cement and pigment and pointed in neat cement slurry in floors, complete all as specified and as directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregates), as in floors complete all as specified and directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles (300x200) x7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm in floor set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

M&L for post constructional anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for post constructional anti termite treatment at points of contact of wood work by chemical emulsion(in oil or kerosene based solution)@ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type D2, (using 40mm grade aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Materials and labour for brick work with subclass 'B' brick; old size brick, straight or curved on plan, exceeding 6m mean radius, built in cement mortar (1:6), complete as specified and as directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.

M&L for RCC Nominal Mix (1:1.5:3 ) type A-1 (using 20mm graded stone aggregate) in slab supported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed.

Material and labour for precast RCC (1:1.5:3) Type A-1 (using 20 mm graded stone aggregate) as in drain cover and set in position with cement mortar(1:4) with MS handle complete all as specified and as directed.

Supply and fix 2nd class hardwood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply ,fabricated and fixing with premium plus High Density Moisture Resistant (HDMR)premium board ,one side decorative lamination and other side balancing white,100% termite proof,18mm thick heavy density,exterior grade cutting, fabricating and suitable fixing for kitchen cabinets and shelves of any size darwers openable leaf complete including fixing only accessories such as Italian stainless steel hinges,handles,magnets as required etc complete all as speified and directed as under:- (a) Stainless steel handle fancy type 100mm size. (b) Stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation. (c) Magnet of suitable size fixed for cabinet leafs, drawers. Make: Century Ply board . Note :- The design and pattern should be approved by GE prior to incorporation.

Supply only stainless steel handle fancy type 100mm size and complete all as specified and directed.

Supply only stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation and complete all as specified and directed.

Supply only magnet catchers suitable size for cabinet leafs and drawers and complete all as specified and directed.

Dismantling fencing wire mesh, incl RCC posts any type complete all as specified and directed.

Supply only chain link fencing 50mm X 50mm mesh 4mm thick, made out of mild steel galvanised hot drip wire including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing inc line wires, any mesh, size and type to any type of standards, rails, straining bolts etc incl provision of binding wire complete all as specified and directed.

Supply and fix iron clamps for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix Mild steel 10 mm dia. of shank screw bolts screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and n exc 22.5cm long complete all as specified and directed.

Excavation in post holes(or similar holes) in soft/loose soil each n exc 0.50 cum,getting out, returning fiiling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed

S&F fixing angle iron as in fencing posts, including securing bolts, drilling holes, cutting top tos shape, notching wire etc. including all necessary driilling, bolting or riveting, etc. complete all as specified and as directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. complete all as specified and directed.

Taking down ceiling fan/ exhaust fan from existing position and kept in store under safe custody for refixing the same on existing postion complete all as specified and directed.

Hanging only ceiling fan/exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

M&L for concealed point wiring for modular wiring (concealed type) with FRLSH PVC insulated sheathed stranded copper conductor cable of size 1.5 Sqmm with FRLSH PVC insulated sheathed stranded copper cable of size 1.5 Sqmm for earth continuity conductor to be drawn in and including PVC conduit medium duty of suitable size but not less than 20 mm and and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of modular metal flush box pressed steel sunken terminal made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer of suitable size and module MS sheet metal switch/ terminal box 1.2 mm thick including modular white cover plate with frames to accomodate modular switch/ socket, etc of suitable size and modules including making good to the surface for one light point controlled by one switch complete all as specified and directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good to the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).

All as per Item No. 100 above but for one ceiling fan/ exaust fan point controlled by one switch and one regulator complete all as specified and directed.

All as per Item No. 100 above but for One 3/5 pin socket outlet 5 Amp on independent board complete all as specified and directed.

All as per Item No. 100 above but for One 3/5pin 6 Amp Socket outlet on the same board with other switch complete all as specified and directed.

All as per Item No. 100 above but for One call bell point controlled by one bell push switch button on independent board complete all as specified and directed.

All as per item no 100 but for 2.5 sqmm FRLSH PVC insulated multistranded copper conductor complete all as specified and directed.

S&F call bell ding dong type AC 230 volt single pole complete all as specified and directed.

S&F celling rose surface, 3 terminal and ISI marked complete all as specified and directed.

S&F lamp holder PVC/ Polycarbonate type with backplate suitable for battel fittings complete all as specified and directed.

S&F modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F socket, 6A - 5 pin combined, 2 module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F socket 6A/16A - 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular Bell push 6A, 1 module complete all as specified and directed.

S&F fan step regulator, 2 module complete all as specified and directed.

S&F modular cover plate with frame of 1 module complete all as specified and directed.

S&F modular cover plate with frame of 2 module complete all as specified and directed.

S&F modular cover plate with frame of 3 module complete all as specified and directed.

S&F modular cover plate with frame of 4 module complete all as specified and directed.

S&F modular cover plate with frame of 6 module complete all as specified and directed.

S&F modular cover plate with frame of 8 module complete all as specified and directed.

Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed. (Note : (i) Three run of 2.5 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces are deemed to be included in unit rate).

All as per item no 121 above but for 4 sqmm FRLSH PVC insulated unsheathed single core multistarnded copper condutor all as specified and directed.

All as per item no 121 above but for 6 sqmm FRLSH PVC insulated unsheathed single core multistarnded copper condutor all as specified and directed.

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, fitted on two Nos 2nd class hard wood round block and complete connection including taking down old unserviceable fitting any type complete all as specified and as directed.

Supply and fix LED light fitting (ceiling) recessed 600mm x 600mm, 36 watt, LED provided with high transmission acrylic cover polycarbonate diffuser modular to be fitted on ceiling complete connection including taking down old unsv light fitting all as specified and directed.

Supply and fix LED bulk head light fitting 10 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall complete with all accessories and including connection and taking out old unserviceable fitting any type complete all as specified and directed.

Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories including connection taking down the old unsv light fitting any type complete all as specified and as directed.

Supply and fix decorative wall light fixture city 1 type made up of polycarbonate suitable for 9 W retrofit LED lamp B22 base to be fitted on wall including necessary electric connection complete including taking down old unsv one complete all as specified and directed.

Supply and fix LED post top 40 Watt die cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection complete with suitable size of fixing items such as nut bolts and washer of suitable size and connecting with existing electric supply including taking down old complete all as specified and directed.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 25 Sqmm 3.5 core with aluminium conductor, 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/ roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.

All as per item no 130 but for 6 sqmm 2 core 1100 volts XLPE aluminium condutor cable all as specified and directed.

Supply and fix AC motor starter 25 Amp suitable for AC power socket box complete after taking down the old socket board and connection complete all as specified and directed.

Supply and fix AC motor starter 16 Amp suitable for AC power socket box complete after taking down the old socket board and connection complete all as specified and directed.

Supply and fixing TPN DB 4 way double door horizontal type suitable for four pole MCB TPN as incomer including taking down old unsv one complete all as specified and directed.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unsv one complete all as specified and directed.

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified and directed.

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniaturecircuit breaker (MCB) of TPN/FP 40 to 100 Amp and current carrying capacity in the DB with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.

Supply and fix cable junction box of inside dimension (155 x 155 x 100) mm with provision of 4/2 number aluminium bus bar of size 25x5mm/ connector for cable of suitable size to be fixed on pole/ wall with suitable size of clamp, nut bolts and washer including taking down old unserviceable junction box with mild steel work complete all as specified and as directed. Make - Hensel/ Syntex/ National

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old unsv earthing complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old unsv wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old unsv pipe complete all as specified and directed.

Material and labour for street light fitting bracket, made out of 45 degree bend to shape and fixed on pole with 2nos GI clamps of suitable length made shape of pole , bolts, nuts & washers including taking out old unsv bracket complete all as specified & directed.

Supply and fix Building security lightt 45 Watt die cast aluminium housing with IP-65 protection with lens including all fixing arrangement required to fixed with pole/ wall on existing bracket or wall including suitable size of fixing items such as clamps, nut bolts and washer and complete connection ,including taking down old unsv light fitting any type complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide or n exc 10 sq m on plan and n exc 1.5 m in depth for foundation etc and getting out in soft / loose soil for taking out pipe line complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and directed.

Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for cutting hard standing / road for laying of pipe, not exc 30 cms wide and not exc 30 cms deep, and getting out in soft/loose soil, etc complete all as specified and as directed.

Supply and fixing of 20 mm bore GI tubing, medium grade with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing and taking down old unsv pipe complete all as specified and directed.

All as per item No 150 above but for 50 mm bore of pipe complete all as specified and directed.

S&F in repair 20mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix 20mm bore gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified and directed.

Supply and fix 50mm bore gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified and directed.

MOTHER LUMIER INDUSTRIES

ELECTRO COMMERCIAL CO

BHARUKA ENTERPRISES

S.P. SINGHA

KAY BEE ASSOCIATES

RUNJEN CONSTRUCTION

RADHA ENTERPRISE