Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC 16 176 A BHARATHI PURAM NAGAI NAGAR DINDUGUL 3 | DINDUGUL | DINDIGUL | TAMIL NADU | ₹1.3 Cr | L1 | Accepted-AOC Being L1 |
| 2 | L2₹1.3 Cr+₹1.4 L (1.02%)Rejected-AOC | ₹1.3 Cr+₹1.4 L (1.02%) | L2 | Rejected-AOC L1 being accepted |
| 3 | L3₹1.4 Cr+₹2.2 L (1.61%)Rejected-AOC | ₹1.4 Cr+₹2.2 L (1.61%) | L3 | Rejected-AOC L1 being accepted |
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
26 Sept 2024, 6:00 pmClosed
CWE NAVY CHENNAI
Commander Works Engineers Navy Military Engineer Services Fort St George Rajaji Salai Chennai600 009
81415 PROVN OF THREE ADDITIONAL WATCH TOWERS WITH URINAL FACILITIES AND DEMOLITION AND RECONSTRUCTION OF WATCH TOWER NO 12 AND SPECIAL REPAIR TO BOUNDARY WALL ON LAKE SIDE AT TIRUNELVELI UNDER GE TIRUNELVELI
2024_MES_650441_2
CWE/NAVY/TVL/81415/E8 OF 2024-25
Open Tender
Civil Works
Lump-sum
360 days
Tirunelveli
As per NIT
8 documents required · 8 mandatory
₹1,000
GE Tirunelveli
₹1.9 L
Yes
13 Nov 2024
6 Sept 2024
28 Sept 2024
6 Sept 2024
26 Sept 2024
13 Sept 2024
6 Sept 2024 - 9 Sept 2024
Amount
GENERAL SUMMARY NOTE: Schedule ‘A’ Part - I is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.
Schedule ‘A’ Part - I “BUILDINGS / STRUCTURES ” , Construction of RCC framed structure of Three Storey Watch Tower with urinal facilities building complete all as specified and shown on drawings and as directed.
GENERAL SUMMARY NOTE: Schedule ‘A’ Part - II to IX are prepriced by MES under Ser No. 2.00 to 9.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.
Lumpsum price worked out by the tenderer for "SITE CLEARANCE / SITE DEVELOPMENT/ EARTH WORK/ EXCAVATION" as listed in Schedule ‘A’ Part-II on Serial Page No.26
Lumpsum price worked out by the tenderer for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III on Serial Page No.27
Lumpsum price worked out by the tenderer for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV on Serial Page No.29
Lumpsum price worked out by the tenderer for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-V on Serial Page No.31
Lumpsum price worked out by the tenderer for "DEMOLITION/DISMANTLING" as listed in Schedule ‘A’ Part-VI on Serial Page No.32
Lumpsum price worked out by the tenderer for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-VII on Serial Page No.33
Lumpsum price worked out by the tenderer for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VIII on Serial Page No.34
Lumpsum price worked out by the tenderer for "BOUNDARY WALL" as listed in Schedule ‘A’ Part-IX on Serial Page No.36
Subtotal
SCHEDULE "A" PART - X MISCELLANEOUS ITEMS NOTE: Schedule ‘A’ Part - X is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.
Supply and fixing,of 15mm bore fancy type chromium plated two way bib taps, with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply and fix health faucet with 1000 mm long flexible tube with wall hook with non-return valve (back flow preventer) complete fitting all as specified and as directed.
Supply and fix brass CP, fancy type angle cock for 15mm bore of pipe, with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends for GI pipe complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit (credit for above items should be made as per conditions separately) etc.complete all as specified and directed.
Taking down old unserviceable sub main wiring of any size complete all as specified and directed.
Taking down old metal enclosure for DB single pole 8 way 240V complete all as specified and directed.
Taking down old LED light fittings any type complete all as specified and directed.
Taking down ceiling fan/ Exhaust fan any type complete all as specified and directed. (Note:- old ceiling fan/exhaust fan to be deposited after taking down to MES store)
Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, concealed in wall including breaking of wall and making good wall / surface of ceiling with sunken type pressed steel / welded terminal boxes made out of 1.2mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for One light/fan point controlled by one switch
All as per Item No. 22 but, one switch socket combination 5 amps on same board.
All as per Item No. 22, but 1.5 Sqmm size copper conductor cable FRLS and 1.5 Sqmm copper earth wire cable FRLS drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for 5 Amps Multi purpose switch socket combination on independent board complete all specified and as directed.
All as per Item No. 22, but 2.5 Sqmm size copper conductor cable FRLS and 1.5 Sqmm copper earth wire cable FRLS drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for 5/15 Amps Multi purpose switch socket combination on independent board complete all specified and as directed.
All as per Item No. 22, but 2.5 Sqmm size copper conductor cable FRLS and 2.5 Sqmm copper earth wire cable FRLS drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for 5/15 Amps Multi purpose switch socket combination on independent board complete all specified and as directed.
Supply and fix for sub main wiring (concealed) complete with two single core 6 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface complete all as specified and directed. Note: 3 runs of 6 sqmm & one run of PVC conduit shall be measured as single unit
Supply and fix LED light fitting 1 x 20 W (4 feet) batten type fittings for surface and pendant application 230volt with extrruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with connector block etc complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed.
Supply and fix in LED mirror light fiiting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.
Supply and fix in repairs LED Security light fiiting 15 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket complete all as specified and as directed.
Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth Lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.3 and connected to earth testing point all as specified and directed including testing on completion complete all as specified and as directed by Engr-in-Charge including taking down old complete Earthing system complete all as directed by Engineer-in-Charge. Note No.1: The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc., complete
S & F heavy duty exhaust fan, metal body, 230V, AC, 50 Hz, of size 300mm sweep 1400rpm with suitable louvers of appropriate size including fixing arrangement and making of holes and make good to distrubed surface match with existing surface complete all as specified and directed by Engineer-in-Charge.
Supply and fix wall mounting Fan of size 450 mm sweep, oscillating type, AC 230 V, 50 Hz, and connecting to ceiling rose complete all as specified and as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F LED Security light for use on top of the watch cabin with distance piece - High intensity , long range, weather & dust proof security search light with highly polished stainless steel reflector-cum-body , suitable heat sinks, toughened from glass , retaining ring. M.S Cradle and passivated bolts. The search light would be supplied with 230V 150W LED COB Lamp & its electronic driver in cast aluminium housing. The search light fitting would be suitable for installing on the roof of the watch tower cabin with arrangement for both vertical & horizontal operational control from inside the cabin . The search light would be supplied with a distance piece of 1 meter for enabling the operator to see close to the watch tower also complete all as specified and as directed. . Make:- Sigma type No 24441-DP or Bajaj/ Crompton/Philips/Havells as approved by GE
Supply and fixing of Flood light, pressure die cast aluminium integral LED flood light, rating 200W ,IP 66 (multi LED) including necessary mounting on building with clamps and iron including connecting cable of size 1.5 sqmm 3 core flexible copper cable 230 V of required length etc. complete all as specified and as directed.
Material and labour for construction of RCC hume pipe septic tank designed to carry sewage and sluge water, inclding excavation in any type of soil/soft disintegrated rock,PCC 1:4:8 below foundation, vent shaft, connection etc for 5 user complete all as specified , as shown on drawing and as directed.
Material and labour for construction of soakage well of internal size of 1.2m dia and 1.5 m effective depth, including excavation in any type of soil/soft disintegrated rock, foundation in PCC 1:3:6,brick work in CM 1:4 for honeycombed walls and including intercepting chamber and screen chamber ,with top ring of M-25 grade concrete ,RCC cover slab in M-25/ SFRC cover, filling with brick bats etc, complete all as specified in drawing and as directed by Engr-in-charge.
Dismantling of concertina coil dia 850mm to 1200mm or any size or description complete all as specified and directed.
Supply and Fix razor blade galvanised concertina coil of 1050mm diametre made out of 2.59mm thick galvanised wire having weight of each coil @ 15.2Kg+/-5%, stretched to a length of 10 to 12 M to achieve 950mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fastners such as J clips, U clips C clips etc, fixed in position complete all as specified and as directed. NOTE: Linear measurement(per running metre of concertina coil of 1050mm dia) shall be measured and paid.
Preparation of new or previously untreated surface exc 10cm width or girth and applying two coats of anti corrosive paint over a coat of red oxide primer on steel surfaces all as specified.
SIVAN BUILDERS (BID ID -3099944)
Kaadosh Real Estates Pvt Ltd (BID ID -3100594)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .