Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹34.6 L+₹2.2 L (6.63%)Rejected-Finance 154 HANUMAN MANDIR DIKSHI TAL NIPHAD DIST NASHIK 422 302 | NASHIK | MAHARASHTRA | 422302 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹35.3 L+₹2.8 L (8.62%)Rejected-Finance FLAT NO 02 RUTUPARNA APARTMENT PLOT NO 36 S NO 324 2A NEAR G D SAWANT COLLEGE PATHARDI NASIK 422 010 | NASHIK | MAHARASHTRA | 422010 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹36.9 L+₹4.4 L (13.6%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹38.5 L+₹6.1 L (18.7%)Rejected-Finance 10 SANJAY HSG SOCIETY RACCA COLONY SHARANPUR ROAD NASHIK 422 002 | NASHIK | MAHARASHTRA | 422002 | L5 | Rejected-Finance Not lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tender Documents
2023_MES_618615_1
GE/NRC/8607/E8
Open Tender
Civil Works
Item Rate
334 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹90,000
Yes
16 Dec 2023
13 Sept 2023
13 Oct 2023
13 Sept 2023
11 Oct 2023
27 Sept 2023
Amount
Taking up or down 25mm or 32mm dia tubes galvanized iron and connections & removing/ shifting to site/store incl cleaning for relaying/refixing height up to four storey complete all as specified and directed by Engineer-in-charge. Note :- 1. Rates quoted are inclusive of taking out bib taps,PVC float valves and fitting as per site condition.
All as per Item No. 01.00 above but Size 20 mm dia
All as per Item No. 01.00 above but Size 15 mm dia
Re-fixing only 25mm or 32mm dia tubes galvanized iron as directed incl renewal of threading/tread cutting at ends of GI pipes fixed/Concealed to walls or laid in floor and jointing including S&F new fitting such as socket, bends, elbows, union etc all as specified and directed of size. Note :- 1. Serviceable GI pipes taken down in item No 01 shall be reused. 2. The rates quoted are inclusive of all new fittings required and cutting threading to existing pipe.
All as per Item No. 04.00 above but Size 20 mm dia
All as per Item No. 04.00 above but Size 15 mm dia
S&F 25 mm dia tubes medium grade galvanized with all fitting fixed/Concealed to walls, ceiling and laid in floor of including cutting, holes in concrete/brick wall/roof and making good if required height up to four storey bldgs all as specifed and directed by Engineer-in-charge.
All as per Item No. 07.00 above but Size 20 mm dia
All as per Item No. 07.00 above but Size 15 mm dia
S&F 25mm Gun metal globe or gate valve cost copper alloy with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed by Engineer-in-charge.
S&F in repairs bib taps cast copper alloy , Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
S&F in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia suitable for for low level flushing cistern complete all as specified and directed by Engr-In-Charge.
S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engr-In-Charge.
S&F ready made PVC conection 15 mm bore 450 mm long with end brass nuts, screws and PVC washer complete all as specified and directed.
S&F in repairs 15 mm dia Stop valves fancy type,chromium plated screwed down,high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.
S&F in repairs wash hand basins,Vitreous china (flat back or angle back type) any size,inclunding cutting for and pinning in ends of brackets or erecting stand , including supply & fixing wastecoupling and pipe.
S & F 15 mm dia Pillar taps,cast copper alloy fancy type with capstan heads,chromium plated,screwed down high pressure,with or without lettered Hot or Cold with long screwed shanks and fly nuts,screwed for iron pipe and fixed.
S&F in repairs vitreous china squatting patern "Orisa pattern" size 580mm x 440mm with trap white with intergral foot rest complete all as specifed and directed by Engineer -in-charge.
S&F in repairs coloured PVC valve less, syphonic action fushing cistern , low level, 10 ltr capacity with inlet, ball valve,, float, chain and pull and brackets complete all as specified and directed
S&F in repairs Stainless steel sink made out of 1.0 mm thick sheet for kitchen including waste pipe CI cantilever brackets and waste coupling etc complete and making good to the side of wall,connecting union to pipe, including bedding in CM to dwarf wall. Overall size 495mm x 420mm and bowl size 410 x 330 x 160mm
M&L for in repairs for PVC (SWR) floor trap, plain with grating including demolition of old trap and jointing with solvent cement of outlet 75/100 mm dia proper joint of out let connection complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
Taking down existing PVC/AC rain water , waste and vent pipe of any bore complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
S&F PVC (SWR) pipes 110 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
S&F PVC (SWR) bends 110 mm dia any radius
S&F PVC (SWR) 110 mm dia vent cowl
S&F PVC (SWR) junction single (single T) equal or unequal 110 mm bore.
S&F PVC (SWR) bends with access door 110 mm dia any radius
S&F PVC (SWR) pipes 75 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
S&F PVC (SWR) bends 75 mm dia any radius
S&F PVC (SWR) 75 mm dia vent cowl
S&F PVC (SWR) junction single (single T) equal or unequal 75 mm bore.
S&F PVC (SWR) bends with access door 75 mm dia any radius
Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.
M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6.
M&L for rendering 15mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall.
M&L for Non Skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for Non Skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for glazed cermic tiles coloured size 300x200x6 to 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match
M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooding for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. including demolition of cement concrete in sunken slab and filling of mass concrete 1:5:10 all as specified and directed by Engr-In-Charge.
Dismantling stone slabs and tiles of any thickness in floors, aprons etc. laid bedded and pointed in any mortar
M & L for 30 cm x 30 cm x 20 to 25 mm thick chequered tiles of rubber moulded with grey cement and pigment are polished, decorative set and pointed in neat cement sluurry in floors etc including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge.
S&F Machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed by Engr-In-Charge.
M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick. all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)
Demolition of cement concrete in ground floors and pavings not exc.15 cms thickness (below or above GL.)
M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg) in foundation, filling and mass concrete and sub base etc.
M&L for rough finished shahbad stone slab 18-25mm thick incl, 15mm thick bedding laid and jointed & pointed in CM 1:4 all as specified & directed.
Dismantling water tanks and removing to store of capacity 2000 litres
Dismantling water tanks and removing to store of capacity 1000 litres
Dismantling water tanks and removing to store of capacity 500 litres
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 2000 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed
Taking down Chowkhats with shutters without taking off shutters from the frames exc 1.5 Sqm each not exc 4 Sqm each
Taking down Chowkhats with shutters without taking off shutters from the frames (not exc 1.5 Sqm each).
Taking down shutters of any descriptin exc 1 Sqm and n. exc 2 Sqm each.
Cutting holes in bk walls built in CM or cement lime mortar and stoned walls built in lime mortar depth of embedded portion of hold fasts or lugs measured from the faces of jamb into the wall exc half brick but n.exc one brick for inserting hold fasts and making good dismantled portion incement mortar 1:3 or cement concret 1:2:4 type B-1 as required.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS suquare tube, suppling and fixing in opening as per specification and drawings .
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as directed by Engineer in-charge.
S&F factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure teated complete all as specified and directed.
S&F 2nd class hardwood plain, solid,straight, chowkhats & frames, wrought,framed, rebated on the solid,rounded or champered,put togetherwith glue pinned at joints , supplied and fixed.
S&F 2nd class HW glazed and skelton shutters, 35mm thick open rebated and prepare to receive glass, gauze etc without sashbars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats. all as specified and directed by Engr-in-Charge.
S&F MS steel flat iron hold fasts confirming to FE-290 Gde E165.
M&L for Preparing the surfaces of wood and wood based material,steel and iron work, new or old and treated with tar or coal tar black paint treating ends of pasts, backs of chowkhats etc area tarred exc 0.1 Sqm each.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised
S&F 100 mm size butt hinges stainless steel
S&F 150 mm aluminium anodisd, barrel tower bolts of excturded section.
S&F aluminium alloy,anodised, sliding door bolt with hash, staple(bolt type) and fixing clip of sheet,cast over exturded sectionand fixing bolt and sliding bolt of exturded section or cast alumimium alloy and fixing 300 mm length
S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
M&L for painting to wood and wood base surface of any description not otherwise described, over 10 cm width or girth preparation of new surfaces, priming coat pink primer and applying two coat of synthetic enamelled paint
Resecuring without taking down of chowkhats or shutter steel or wooden window area not exceeding1.5 Sqm each including necessary repairs to hinges, welding and nut/bolts etc all as specified and directed. Note : building height up to four storey bldgs
Dismantling boarding, cup board self/ shutter any description, fixed in any position with nails/screw etc complete all as specified and directed.
M&L for 25 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including 4mm thick teak wood beading on all edges as in kitchen cabinet, cup board self, book self pelmet box etc complete all as specified and directed.
S&F 75 mm size butt hinges stainless steel
S&F 100 mm aluminium anodisd, barrel tower bolts of excturded section.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised
Dismantling of steel window/ventilators any description and any size complete all as specified and directed.
M&L for steel window in Ahmadbad section with double shutters, side hung including box type hinges with steel handles steel peg stay and complete with glazing bars (one side glazed shutter and other side fly proof shutter with and 15x3 mm flat iron fillet around and centre for fly proof shutter including preparation of newly surface , applying two coat of synthetic enamel paint over coat of prime confirming to IS steel window and section complete all as specified and directed by Engineer -in-Charge. (Note :- glazng and wire gauging shall be measured and paid separately.)
S&F solid PVC frame of size 50 x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS suare tube , with necessary arrangement for fixing of glass for louer type window / ventilator and additional PVC beading around the frame for fixing of wire mesh supplying and fixing in opening all as specified & directed. (Note :- Glazing / wiremesh shall be measure & paid separately).
S&F in repair 20/25 mm dia medium weight, aluminium powder coated of approved colour as in drapery rod complete all as specified and directed.
S&F aluminium powder coated brackets, of colour and design as approved suitable for curtain rods of 20/25mm dia complete all as specified and directed.
Hacking out old broken glass,n.exc 0.5 sqm area each (any thickness, size, quality or description) from metal/ wooden frame inculding punching or drilling out old glazing pins / spring clips etc. Height upto four storey buildings.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beading where is required in squares n.exc. 0.5 Sqm in each pane. Height upto four storey buildings.
Ditto as in Item No. 83.00 above but figured glass,pin headed type
Demolition of brick work/stone work built in any cement mortar including coping.
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:6.
Taking down cement or cement lime plaster,any description on brick or stone walls,etc including racking out joints,hacking for key,scrubbing down with water,etc.
M&L for rendering 15mm thick cement mortar on brick masonry surfaces in CM 1:6 and finishing even and smooth without using extra Cement including sagol finish on plaster surface of internal wall.
M&L for rendering 5mm thick cement mortar on Ceiling surfaces in CM 1:4 and finishing even and smooth without using extra Cement.
M&L for applying two coats of Distempering on walls and ceiling with oil emulsion distemper including preparation of new plastered surfaces.
M&L for rendering 15mm thick cement mortar on brick masonry surfaces in CM 1:4 and finishing even and smooth without using extra Cement.
M&L for applying two coats of cement paint over coat of priming with alkali resistant primer on walls including preparation of new plastered surfaces.
Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store and making good to disturb surfaces of wall/floors etc as specified & directed.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point/ fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.
All as per ser item No.94.00 herein before but with One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No. 94.00 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.
All as per ser item No.94.00 here in before but on independent board.
All as per ser item No. 94.00 here in before but one light point controlled by 2 way switches.
All as per ser item No. 94.00 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casin and caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for sinking for boxes and making good to wall ,floors etc.
All as per ser item No. 100.00 here in before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No.100.00 here in before but on independent board.
All as per ser item No. 100.00 here in before but one light point controlled by 2 way switches.
All as per ser item No. 100.00 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.
All as per ser item No. 100.00 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.
Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.
Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin) 5/15 Amps, 230V, AC.
Supply and fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED bulb 9 watt complete all as specified and directed
Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. Make - Havells /Anchor / Legrand.
Supply and fixing in replacement of bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.
Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.
M&L in replacement and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep.
Supply and fix in replacement Energy efficient LED tube & batten Luminaire, 20 Watt, 4 feet long complete with prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed.
Supply and fixing in replacement of LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Supply and fixing in replacement of LED 10 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Fixing only in replacement of LED tube light fittings 18/20 watt complete with connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to tube light fittings complete all as specified and directed by Engineer-in-Charge. (Note:- LED tube light 18 /20watt will be issued to contractor free for fixing only.)
Supply and fixing in replacement of buzzer, AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of bell, AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of bell multi music type AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.
M&L for preparation of surface of MS/Meter box all including inside and outside surface by scrapping applying two coats of Gray paint by Spray painting complete all as specified and directed by Engr in Charge.
Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No. 124.00 to 127.00 herein before :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.
M&L for MS box of size 130x120x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of MCCB, DB's, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealled and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with MCCB DB's and electric meters and refixing the same MCCB, DB's and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing completed all as directed by Engr-in-Charge. Note : (a) Any plastering work involved while taking out old UNSV meter box and refixing the new meter box is deem to be included in this rate. (b) PVC flexible conduit required within the meter boxes is deemed to be included in this item rates.
Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed.
Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 8 way with 200 Amps rated busbar all as specified and directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 2 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 12 ways all as specified & directed.
Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA.
Supply and fix in replacement MCCB 63 Amp TP, 415 volts 16KA.
Supply and fix in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA .
Supply and fix in replacement MCB TP 40 Amp, 415 Volts, 50 Hz with 10 KA.
Supply and Fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA .
Supply and Fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA .
M&L for replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.
Supply and fixing in replacement of 30 Watt LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
NOTE: - AMOUNT OF SCHEDULE OF CREDIT RS. 1,94,093.50 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
MAHIMA CONSTRUCTION
Abhiraj Enterprises
Srujan Associates
M/S SAMEER SUBHASH PATANI
UNITED ENTERPRISES
M/S K. K. Construction
SVT ENGINEERS AND CONTRACTOR.
Bidder Name
MAHIMA CONSTRUCTION
M/S SAMEER SUBHASH PATANI
SVT ENGINEERS AND CONTRACTOR.
M/S K. K. Construction
UNITED ENTERPRISES
M/s. JBSR ENTERPRISES.
Srujan Associates
Abhiraj Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .