Repair work on the administrative office at the Bhausingh Panki Solid Waste Management Plant

Finishing wall with two coat of acrylic smooth exterior paint of best quality including supply of all material, labour T&P etc all complete

Dismantling exisiting plaster incluidng disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meter

12mm cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not excedding 80mm in girth and finished even and smooth, in 1 cement:4 fine sand

P/A white cement based putty of average thickness of 1mm, of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth including cost of material, lbour T&P etc all complete.

P/L 8 to 10mm thick ivory or light shade vitrified tiles of 600mmx600mm size in flooring with 1:3 cement mortar with all charge complete.

P/L ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20mm thick bed of cement mortar 1:4(1 Cement:4 Coarse sand), jointing with grey cement slurry @3.3 kg/sq.m including pointing the joints with white cement and matching pigments etc complete

Fixing panes of glass with equal or equivalent ISI marked quality putty, brads and springs and including supply of all material and labour with 3.8 to 4.7mm thick glass etc all complete.

P/F ISI marked flush door shutter conforming to IS:2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thck including ISI marked Stainless Steel butt hinges with necessary screws

P/F double scaffloding syster (cum lock type) on the exteriro side of building/ structure, upto 25 m height, above ground level, including additional rows of scaffolidng in stepped manner as per requirement of site, made with 40mm dia MS tube placed 1.5m center to bentre, horizont & vertical tubes joint with cup and lock system with MS Tubes, MS tube challis, MS clamps and staircase system in the scaffolding for working plafform etc and maintaineng it in a serviceable condition for execution of work of cleaning and/or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracing, runners, connecting with the building etc wherever rquired, if feasible, for inspection of work at required location with essential safety features for the workmen etc complete as per directon and approval of Enginner-in charge

Brass bib cock heavy quality(Gem Mikadeo/Encess Williams) 5mm dia 400 gms etc all complete