Providing cement concrete pavements with side drains to Vasantha Nagar west extensio in Villianur Town in VCP

Amount

Code No.2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil

CodeNo.2.27C.1 Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods , watering , rolling each layer with 1/2 tonne roller , or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (Payment will be made based on level measurement)

CodeNo.4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2.4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size).

CodeNo.4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:3.6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

CodeNo. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size).

CodeNo. 4.3.1 Centering shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns, etc.

CodeNo.5.12 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

CodeNo.5.22.7 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Code No 10.25.2 Steel work welded in built up sections framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

CodeNo.11.3.1cement concrete flooring 1:2:4 (1 cement : sqm 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

CodeNo.13.16.1 6 mm cement plaster to ceiling of mix - 1:3 (1 cement : 3 fine sand).

CodeNo.30.7 Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

CodeNo.7.23A Providing and fixing premoulded bitumen joint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide

CodeNo.4.1a.1 Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401of MoRTH specification, 4th Revision - by plant mix method for grading I material

code No. 30.37 Desilting the canal by removing silt, slush and debries from the bed of the drain removing the grass , buses etc., complete in uhygenic and foul condition including disposal of the same within an average lead of 1KM without polluting the environment by mechanical means

DATCHANAMOURTHY