REPAIR TO COMPOUND WALL AND PATH ALONG THE MALL ROAD AT NASIRABAD

Amount

Excavation in trenches not exc 1.5m wide and 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning, fillings in including spreading, levelling, watering and well ramming in layers, n.exc 25cm thick in soil complete all as specified and directed.

Removing of excavated soils, not exc 50mtr and depositing where directed at a level n. exc 1.50mtr above the starting point complete all as specified and directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

M & L for RCC 1:1.5:3 using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete, surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

M & L for RCC 1:1.5:3 grade using 20mm graded aggregates as in Roof beams, lintel beams/bands, cantilevers, bressummers, lintels over 1.5m span, chajjas etc complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to sides and soffits of floor or roof beams, soffits of lintel beams/ bands, chajjas, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

Demoliton of brick / stone masonary work built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.

All as per item No. 10.00 here in before but except stone complete all as specified and directed.

M&L old size Brick work with Fly ash bricks straight or curved on plan exceeding 6m mean radius with old size bricks, built in Cement Mortar 1:4 complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping finished even and smooth without using extra cement and incl necessary form work complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for rendering 15mm thick on stone/Brick masonary surfaces in cement mortar 1:4 even and smooth without using extra cement complete all as specified and directed.

M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

Taking down cement plastering of any description on brick / stone / concrete wall /ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of weather proof acrylic emuslion paint including a coat of emulsion wall primer over wall surfaces complete all as per manufacture's instructions & as directed by Engr -in-Charge. Make :- Asian / Apex / Berger (Wheather coat All Guard).

Complete removal of existing treatment from wall surface and preptation old surface and applying two coats of weather proof acrylic emuslion paint including a coat of emulsion wall primer over wall surfaces complete all as per manufacture's instructions & as directed by Engr -in-Charge. Make :- Asian / Apex / Berger (Wheather coat All Guard).

NOTES for item No 18.00 & 19.00 above:- The following precautionary measures shall be ensured by the contractor before and during execution of work (i) All painting works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submitt MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm. (ii) After completion of painting work contractor shall remove and clean all the droplets /stain of paint left on the floor, glasses and joinery. (iii) OEM/authorised OEM applicator should give guaranttee of minimum 05 years and mentioned in MOU submitted to the department before commencement of work. (iv) Aurthorised applicator shall be and all materials shall also be of similar make as approved by GE.

Demolition and breaking up drain pipe of any description of any shape and size including all fitting and removing from site complete all as specified and directed.

M&L PCC 1:3:6 type D-2 using 40mm graded stone aggregate as in bed of drain pipe of 300mm dia (nominal) including packing under and completely surrounding pipes with concrete against the size of after they are laid and tested complete all as specified and directed.

M&L for 450mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed

M&L in repair for 35mm thick Precast Cement Concrete jallies 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) set in CM 1:4 complete all as specified.

M&L cement concrete type D-2, 1:4:8(40 mm graded aggregate), 100 mm thick, complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for preparation of concrete surface applying two coats of synthetic enamel paint over a coat of primer complete as per manufactrer instruction all as specified and directed.

M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (75mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m all as specified and as directed by the Engineer-in-Charge.

Samaksh Enterprises

M/S MAMTA CONSTRUCTIONS

RAMKANYA CONSTRUCTION COMPANY

M/S AL ASMA ENTERPRISES

M/s AKASH CONSTRUCTION CO.

M/S Nexus Projects

M/s SUNIL ENTERPRISES

ANAM BUILDCON

V K LAKWAL CONSTRUCTION

TANISHQ ENTERPRISES

SHREE BALAJI TRADING CORPORATION

TARA CHAND JI GOMA CONSTRUCTIONS CO.