Construction of Various Works at Argul Campus, IIT Bhubaneswar, Khordha, Odisha.

S. No. Description DSR Amount Non-DSR Amount Total Amount

S. No. Description DSR Amount Non-DSR Amount Total Amount

GRAND TOTAL (DSR +Non DSR) 137,949,798.31

Bill of Quantities

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

1 1.1 Carriage of material by mechanical transport including loading, unloading

1.1.2a Earth lead upto 1 Km Cum 328.32 203.98 66,970.71

2 2.6 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in

width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-

2.6.1 All kinds of soil cum 189.00 205.45 38,830.05

3 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means over areas (exceeding 30 cm in depth, 1.5m in width as well

as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m

and lift upto 1.5 m, disposed earth to b

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m, including getting out the excavated soil, and then returning the

soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m :

2.10.1 All Kind of Soil

a. 2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. Rmt 290.00 255.55 74,109.50

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Rmt 880.00 417.35 367,268.00

Digitally signed by NEELESH

1 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m, including getting out the excavated soil, and then returning the

soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m :

2.13.1 Ordinary Rock -

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Rmt 1552.00 933.35 1,448,559.20

6 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides

of foundations etc. in layers not exceeding 20cm in depth, consolidating

each deposited layer by ramming and watering, lead up to 50 m and lift

7 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials.

a. 2.26.1 All kinds of soil cum 44.00 104.50 4,598.00

b. 2.26.2 Ordinary or hard rock Cum 248.40 187.40 46,550.16

8 2.27 Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth level :

a 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4

graded stone aggregate 20 mm nominal size derived from natural sources) cum 750.00 7,365.15 5,523,862.50

b 4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8

graded stone aggregate 40 mm nominal size derived from natural sources)

10 5.9 Centering and shuttering including strutting, propping etc. and removal of

a. 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 154.20 307.95 47,485.89

Digitally signed by NEELESH

2 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

b 5.9.2 Shuttering for Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc. Sqm 79.80 669.55 53,430.09

c. 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 258.00 766.55 197,769.90

d. 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 160.00 608.35 97,336.00

11 5.11 Extra for additional height in centering, shuttering where ever required

with adequate bracing, propping etc. including cost of de-shuttering and

decentering at all levels, over a height of 3.5 m, for every additional height

of 1 metre or part thereof (Plan area to be measured)

5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 42492.37 89.65 3,809,440.97

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 8120.00 89.65 727,958.00

Providing and laying in position ready mixed or site batched design mix

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing

strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following

grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in

design mix is more than 110% of the specified minimum cement content,

the contractor shall have discretion to either re-design the mix or bear the

cost of extra cement.

a. 5.33.1 All works upto plinth level

Digitally signed by NEELESH

3 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

Concrete of M25 grade with minimum cement content of 330 kg /cum cum 109.17 8,683.80 948,010.45

b. 5.33.2 All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg /cum cum 62.00 10,306.20 638,984.40

15 5.35 Add for using extra cement in the items of design mix over and above the

specified cement content therein.

16 6.2 Brick work with common burnt clay modular bricks of class designation 7.5

in foundation and plinth in:

6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 309.58 5,746.80 1,779,094.34

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

curvature (wherever required) and fitting the same with necessary stainless

steel nuts and bolts complete, i/c fixing the railing with necessary

& stainless steel dash fasteners , stainless steel bolts etc., of required size, on kg 950.00 612.25 581,637.50

the top of the floor or the side of waist slab with suitable arrangement as

approval of Engineer-in-charge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories

bolts, fasteners etc.).

18 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300

mm or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades, except

White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar

1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including pointing the joints with white cement and matching

pigments etc., complete.

Digitally signed by NEELESH

4 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

19 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and

conforming to I.S. 15622, of approved make, in all colours & shade, in

skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement:

3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including

grouting the joint with white cement & matching pigments etc. complete.

20 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :

21 13.16 6 mm cement plaster of mix :

22 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc. (External work)

b. 18.12.8 80mm dia nominal bore Rmt 105.00 919.10 96,505.50

23 18.13 Making connection of G.I. distribution branch with G.I. main of following

sizes by providing and fixing tee, including cutting and threading the pipe -

24 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts,

rubber insertions etc. (the tail pieces if required will be paid separately) :

18.31.3.2 Class II

Digitally signed by NEELESH

5 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

25 18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.

surface box 100mm top diameter, 160 mm bottom diameterand 180 mm

deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary

excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded

stone aggregate 40 mm nominal size) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating

coat of neat cement complete as per standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation

26 18.59 Providing and fixing C.I. double acting air valve of approved quality with

bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if

required will be paid separately) :

27 18.69 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical

jointing as per IS : 9523 :

28 18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes

conforming to IS : 8329 :

a. 18.72.1 100 mm dia Ductile Iron Class K-7 pipes Rmt 709.00 1,121.10 794,859.90

b. 18.72.2 150 mm dia Ductile Iron Class K-7 pipes Rmt 1703.50 1,601.30 2,727,814.55

Digitally signed by NEELESH

6 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

29 Non - DSR Providing and fixing of ROOF/SIDE SHEETING: LYSAGHT SPANDEK

935- COLORBOND STEEL 0.50 TCT Supply of colour coated LYSAGHT

SPANDEK 935 profile sheet of nominal 993 mm supply width and nominal

24 mm deep ribs with subtle square fluting in the five pans at nominal 93.5

mm c/c. The end rib shall be designed for anti-capillary action, to avoid

any seepage of water through the lateral overlap. The feed material is

manufactured out of nominal 0.45mm Base metal thickness (BTM), and 0.5

mm total coated thickness (TCT),Hi -strength steel with min.550 MPa yield

strength ,metallic hot deep coated with aluminum zinc

alloy(55%al,45%zink) as per AS 1397-Zincalume AZ 150 (Min 150

gsm/sq.mt total on both sides) with super durable polymer quality paint

coat as per AS/NZS 2728.The paint shall have a total coating thickness of sqm. 2550.00 2,124.86 5,418,393.00

nominal 35 micron meter comprising of nominal 20 micron meter exterior

coat on top surface and nominal 5 micron meter reverse coat on back

surface over nominal 5 micron meter pollster primer coat on both surface. 2

- Lysaghy trimdek 0.45Nbmt (0.5TCT)3-Cyclonic washer -aluminum finish

with screw SDS 12X24X65, all complete as per direction of Engineer In-

charge.The cost includes providing and welding metal plates to close

structural sections at the ends.

Turf Grassing of Cricket Ground, Hockey ground, athletic track, Javelin

ground and surrounding area near stand building

30 DSR-2020- Uprooting rank vegetation and weeds by digging the area to a depth of 60

Hort. 2.12 cm, removing all weeds and other growth with roots by forking repeatedly,

breaking clods, rough dressing, flooding with water, uprooting fresh

growths after 10 to 15 days and then fine dressing for planting new grass,

including disposal of all rubbish with all leads and lifts.

31 DSR-2020- Anti termite treatment of lawn area through premise 30.50% I P. one liter

Hort. 2.56 premise diluted in 499 liters water and applying solution @ 1.00 litre

solution per sqm lawn or bed area.(two application) i/c cost of

chemical)and as per direction of officer-in-charge. sqm 29997.00 7.55 226,477.35 -

32 DSR-2021- Supplying and filling 100 mm depth sand and mixing with existing earth

2.27 for preparation of finished bed alround, including watering, ramming,

consolidating and dressing complete. Cum 2999.70 2,161.20 6,482,951.64 -

Digitally signed by NEELESH

7 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

33 NDSR Supply of approved quality organic manure turf booster(100kg/100sqm).

34 DSR-2020- Spreading of dump manure/ organic manure and/or good earth in

Hort. 2.8 required thickness as per direction of Engineer-in-charge (cost of dump

manure and/ or good earth to be paid separately). Cum 2999.70 52.35 157,034.30 -

35 DSR-2020- Mixing earth and manure in the required proportion specified or as

Hort. 2.9 directed by the Engineer-in-charge. Cum 2999.70 36.55 109,639.04

36 NDSR Supply and application of basal fertilization & starter fertilizer including

application of herbicide as per requirement. Sqm 29997.00 32.70 980,901.90

37 NDSR Supplying and laying of bermuda tiffway 419 grass turf roll with earth 50

to 60 mm thickness on existing ground prepared with proper level and

ramming with tools wooden and then roling the surface with light roller,

make the surface smooth and light watering with sprinkler and

maintenance for 90 days till the grass established properly as per direction

of Engineer-In-charge including top dressing, fertilization, disease control,

smoothing & ferming to achieve best playing surface.

Digitally signed by NEELESH

8 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

38 NDSR Maintenance of the ground for additional two months after completion of

one month maintenance as mentioned in grassing item. The work includes

regular and slow release imported fertilizers e.g. Anderson USA , Compo

expert , Germany, Nuturf Australia only from authentic importers,

fungicides such as Amister top, Tilt, Kavach all from Syngenta, insecticides

such as premise from Bayer or equivalent brand only, selective

herbicides of reputed brand etc., frequent light top dressing of root zone

mix to be carried out throughout grow in period surface of the field should

be plane and smooth and there should not be any undulations/ unevennes

on base ground surface, necessary manpower, minimum 03 nos. required

to be deployed by the agency at all times including one visit of an

Agronomist to be arranged by the agency.The outfield grass should be

maintained at a height of 15 to 20 mm throughout including mowing as

per requirements and should be free of weeds , diseases and should

produce lush green color constantly with excellent playing conditions. The

contractor shall be responsible for handing over the playground to the

client IIT Bhubaneswar in all respect in excellent playing condition.

40 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain &

brass threaded fittings This includes jointing of pipes & fittings with one

step CPVC solvent cement, trenching, refilling & testing of joints complete

as per direction of Engineer in Charge. External work

a. 18.9.1 15 mm nominal dia Pipes meter 200.00 221.35 44,270.00 -

b. 18.9.3 25 mm nominal dia Pipes meter 400.00 370.65 148,260.00 -

c. 18.9.6 50 mm nominal dia Pipes meter 2000.00 811.85 1,623,700.00 -

41 18.15 Providing and fixing brass bib cock of approved quality :

EARTHEN PITCH WORK (02 NOS.)

Digitally signed by NEELESH

9 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

42 DSR-2021- Earth work in surface excavation not exceeding 30 cm in depth but

2.1.1 exceeding 1.5 m in width as well as 10 sqm on plan including getting

out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as

directed by Engineer-in- Charge:

43 DSR-2020- Anti termite treatment of lawn area through premise 30.50% I P. one liter

Hort. 2.56 premise diluted in 499 liters water and applying solution @ 1.00 litre

solution per sqm lawn or bed area.(two application) i/c cost of

chemical)and as per direction of officer-in-charge. sqm 156.00 7.55 1,177.80 -

44 NDSR Supplying of black Soil for Construction of Cricket pitches including

loading, unloading and transportation charge. ( from selected site Boudh )

45 NDSR Drying and Sizing the supplied soil into aggregates of 12 to 15 mm size,

sieving to different sizes and finally throwing out the powder of clay as per

BCCI Standards. cum 72.00 2,420.00 174,240.00

46 5.9 Centering and shuttering including strutting, propping etc. and removal

5.9.1 Foundations, footings, bases of columns, etc. sqm 40.00 307.95 12,318.00

47 NDSR Suppying & Laying of fine Sand of main and practice pitch square with

compaction cum 16.00 1,768.00 28,288.00

48 NDSR Construction of main pitches Square including transorting, laying and

leveling and compaction of each layer of pitch soil as per BCCI Standrads.

The contractor at his own cost has to deploy pitch curator experienced in

construction of national level cricket stadium during the work and he

will remain present and supervise the work and will also issue a fitness

certificate stating that the constructed pitch fulfils all BCCI's standards

and fit for playing.

Digitally signed by NEELESH

10 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

49 NDSR Supplying and sprigging Bermuda selection No. 1 grass in pitch Square all

complete as per direction of Engineer-in -charge. The contractor will

maintain the cricket pitch for 03 months in all respect including rolling at

his own cost and will be responsible to handover to the client IIT

Bhubaneswar in excellent playing conditions.

PRACTICE RCC PITCH WORK (02 NOS.)

50 DSR-2021- Earth work in surface excavation not exceeding 30 cm in depth but

2.1.1 exceeding 1.5 m in width as well as 10 sqm on plan including getting out

and disposal of excavated earth upto 50 m and lift upto 1.5 m, as

directed by Engineer-in- Charge:

51 NDSR Hire charges for Smooth Wheeled Roller 8 to 10 tonne HOUR 72.00 415.28 29,900.16

52 5.9 Centering and shuttering including strutting, propping etc. and removal of

5.9.1 Foundations, footings, bases of columns, etc. for concrete sqm 76.00 307.95 23,404.20 -

53 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth level :

4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6

graded stone aggregate 20 mm nominal size derived from natural sources)

54 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth level :

4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived from natural sources)

55 5.22 Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 300.00 89.65 26,895.00 -

Digitally signed by NEELESH

11 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

Turf Grassing near Stand Building

56 DSR-2020- Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

Hort. 2.33 60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface with

light roller make the surface smoothen and light waterning with sprinkler

and maintenance for 30 days or more till the grass establish properly, as per

direction of officer-in-charge.

Athletic track and Javelin Ground

57 DSR-2020- Providing & laying Selection no. 1 doob grass turf with earth 50mm to

Hort. 2.34 60mm thickness of existing ground prepared with proper level and

ramming with required tools wooden and than rolling the surface with

light roller make the surface smoothen and light watering the same

maintenance for 30 days or more till the grass establish properly,as per

direction of officer in charge

58 Non- DSR Providing and fixing of Johnson make Endura tiles 20mm thick (30x30cm)

tiles (copy attached) to be laid on external area laid on 20 mm thick

Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including pointing the joints with white cement and sqm 140.59 2,782.40 391,177.62

matching pigments etc., complete.

Size of Tile 300x300 mm.

Digitally signed by NEELESH

12 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

59 Non-DSR Supply and installation of 20mm thick Terracotta tiles of Beige colour of

CITADEL Brand made entirely from natural raw materials derived from a

sustainable source with superior finish, high strength, low maintenance ,

tested safety , colour fast, highly resistant to all kinds of weather conditions

, fire resistant with density 2.0-2.4 g/sqcm, dry weight 46 kg /sqm,

elasticity .305 x 105 as per ISO 17561, water abrasion value 3%, collapsible

strength > 7*104N, anti fire performance grade A , thermal shock stability

with no crack and burst after 10 times testing JC/T 1080-2008, sound

proofing with reduce noise over 9 db , thermal conductivity 0.264 W/m@K,

Wind pressure performance Positive 5.0 KPa, Negative 5.0 KPa GB/T 21086-

2007, Seismic performance over 10 grade GB/T 18575\GB5011, Acid

resistant . Installation up to 10.0 mtr height with Aluminium clip holder C

channel, Angle,box section ,self drilling screw,anchor fastenr as per

structural design all complete. as approved by Architect. The windload is

to be considered 2.9 Kpa for the cladding to withstand 250 kmph wind

Digitally signed by NEELESH

13 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

60 Non-DSR Providing and fixing in position wall panelling of over all thickness of 145

mm thick including Knauf ceiling Solutions Channeled Wooden panels of

width 192 mm, thickness of 15mm and length 2400 mm made up of high

density fiber board with minimum density of 800 Kg/m3 substrate with a

laminated facing as per the approved shade / species & finish with

melamine balancing layer on the reverse side. The boards shall have a

special perforation pattern of 3 mm groove & 13/21 mm pitch. The panels

shall have fire resistance of Class I, BS 476 part 7. The edges of the panels

shall be “tongued-and-grooved” to receive special clips for installation. The

back of the perforated panel shall have sound absorbing non-woven

acoustical fleece. The panel shall be mounted on special channels using

clips. Install pine wooden battens of 50x50 on the solid wall Vertical using

screws and fastners at spacing of 600mm centre-to-centre & as per required.

Fixing of vertical aluminium tube of 50X25X2mm over 12mm thick BWP

Marine ply SAINIK 710 CENTURY Brand plywood board with perforation

@ 50mm c/c as per requirement of desired RT value, for 50mm air gap at

spacing of 600mm centre-to-centre & as per required complete with

necessary screws. Screw the aluminium channel (keel) Horizontal on

wooden battens 600mm centre to centre. Install the first set of wooden

panels by inserting the clips. For border channel insert the groove of the

panel in to the projecting flange of the aluminium clip. Continue installing

column of panels by inserting the tongue into the groove of the earlier

inserted panel and progressively installing clips for inside channel into the

next aluminium channel (keel) and simultaneously fill the gap between

Plywood board & panel with 50mm thick polyester wadding of 1000 GSM.

Continue the process till the end of wall. Use clips for border channel to

finish off the installation, finish the edges using wood moulding of sqm 2675.20 13,363.90 35,751,105.28

matching colour or as approved by Engineer-in- Charge. all complete as

61 Non-DSR Providing and fixing wooden moulded corner beading of triangular shape

to the junction of panelling etc. with iron screws, plugs and priming coat on

unexposed surface etc. complete 2nd class teak wood. 16x16 mm (base and

62 Non-DSR Providing and fixing 2nd class teak wood lipping/ moulded beading or taj

beading of size 50X120 mm fixed with wooden adhesive of approved

quality and screws/nails on the edges of the Pre-laminated particle board

as per direction of Engineer-in-charge

Digitally signed by NEELESH

14 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

63 Non-DSR Providing and fixing in position trap door of required size as per approved

shop drawing of aluminium access panel with 12.5MM MR (Moisture

Resistance) type Gypsum Board for the trap door and all other arrangement

to fixing at site including all necessary as per direction of Engineer-in-

charge.The cost includes all item necessary transport and lifting etc.

complete. The approved make of trap door is Easy access - Standard

Acess Panel- by mm2mm products for using in the site works.

64 12.45 Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which

the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board

to ceiling section and perimeter channel with the help of dry wall screws of

size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer

suitable for board, all as per manufacturer's specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in Charge but

12.45.3 excluding the cost

12.5 mm thick of painting

tapered with : moisture resistant board

Digitally signed by NEELESH

15 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

65 Non-DSR Providing & Fixing of Knauf ceiling Solutions Fibre Glass Acoustical

Suspended Ceiling System with 15mm thick Optra Microlook 90 Edge Tiles

with Knauf Suprafine 15mm face exposed grid. The tiles shall have smooth

laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 –

0.95(Average value of Absorption Co-efficient readings taken at 250 Hz, 500

Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance

≥88% as per ASTM E-1477, Colour Pebble White, Fire Performance of Class

0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚

edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for

Green Building application, with Recycled content of 85%.

66 Non-DSR Providing & fixing VISTA Roller Blind without Head Rail of shade DS

Opaque Champagne-004 including carriage sqm 288.00 3,806.80 1,096,358.40

67 Non-DSR Providing & fixing VISTA Roller Blind without Head Rail of shade Eco

Screen- Ivory - 002 including carriage sqm 288.00 3,529.90 1,016,611.20

68 Non-DSR Providing and fixing in position Podium of 3000mm length, 2000mm width

in centre, 1500 mm width at end both side and 200mm height, including

top and side cover with water proof ply wood of 18mm thickness BWP

Marine ply SAINIK 710 CENTURY Brand plywood board with base of pine

wood battens of 60mm X 182mm at specing of 500mm centre to centre both

way with teak wood bidding for edge protection, including the painting HI

gloss superior grade enamel paint over wood primer all complete as per

direction Engineer in charge. (The payment of teak wood bidding and its

moulding shall be paid separately).

69 Non-DSR Providing and fixing in position wooden platform as per required size in

floor area 3000mm length, 2000mm width in centre, 1500 mm width at end

both side and average 125 mm height (50 mm at one end and 200 mm at

other end), including top and side cover with water proof ply wood of

18mm thickness BWP Marine ply SAINIK 710 CENTURY Brand plywood

board with base of pine wood battens of required size at spacing of 500mm

centre to centre both way all complete as per direction Engineer in charge.

Digitally signed by NEELESH

16 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

70 11.33 25mm wooden planking, tongued and grooved in flooring including fixing

with iron screws complete with : -

11.33.1 Second Class teak wood sqm 400.00 4,187.95 1,675,180.00

71 23.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting samples

from different strata, preparing and submitting strata chart/ bore log,

including hire & running charges of all equipments, tools, plants &

machineries required for the job, all complete as per direction of Engineer-

in-charge, upto 90 metre depth below ground level.

23.1.1 All types of soil

72 23.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting samples

from different strata, preparing and submitting strata chart/ bore log,

including hire & running charges of all equipments, tools, plants &

machineries required for the job, all complete as per direction of Engineer -

in-charge, beyond 90 metre & upto 150 metre depth below ground level.

23.2.1 All types of soil

73 23.3 Supplying, assembling, lowering and fixing in vertical position in bore

well, unplasticized PVC medium well casing (CM) pipe of required dia,

conforming to IS: 12818, including required hire and labour charges,

fittings & accessories etc. all complete, for all depths, as per direction of

Engineer -in-charge.

74 NDSR Supply, Instalation, TESTING and Commissioning of Submersible pump

of Flow range 70 LPM @ Head 90 Mtr with 3 phase 2900 RPM 3 HP motor.

The pump having discharge size 40 mm. Make Kirloskar Model:

KS4 C3022 Including Starter panel 3 phase3HP DOL along with 40mm

HDPE Pipe100mtr,2.5 sqmm 3 core flat cable 110 mtr,Nylon rope 110

mtr,4sqmm 4core Arm cable 200 mtr, and bore plumbing material Lum

Digitally signed by NEELESH

17 of 18 SAHU NBCC(I) LTD

Civil Works IIT Works Bhubaneswar

S. Item No. Rate (Rs.) Amount (Rs.)

No (DSR-2021 / Description of Item Unit Qty.

DSR 2021 Non-DSR DSR - 2021 Non- DSR

GRAND TOTAL 135,823,071.98

GRAND TOTAL 135,823,071.98

Digitally signed by NEELESH

18 of 18 SAHU NBCC(I) LTD

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORKS -CONSTRUCTION OF UNDER GROUND TANK (UGT) FOR SAC BUILDING AT IIT BHUBANESWAR,ODISHA

BILL OF QUANTITIES

Item No. Rate Amount

S.No (DSR-2021 Item Description Unit Qty.

/ Non-DSR) DSR 2021 Non-DSR DSR - 2021 NON DSR

1 1.1 Carriage of material by mechanical transport including loading,

unloading and stacking

1.1.2a Earth lead upto 1 Km Cum 328.32 203.98 66970.71

1 2.7 Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means over areas (exceeding 30 cm in

depth, 1.5m in width as well as 10 sqm on plan) including

disposal of excavated earth, lead upto 50 m and lift upto 1.5 m,

disposed earth to b

2 2.25 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

depth, consolidated each deposited layer by ramming and

watering, lead up to 50m and lift upto 1.5m.

3 2.26 Extra for every additional lift of 1.5m or part thereof in

excavation/ banking excavated or stacked materials.

2.26.2 Ordinary or hard rock Cum 248.40 187.40 46550.16

4 4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40

mm nominal size). Cum 8.80 4715.60 41497.28

5 5.9 Centering and shuttering including strutting, propping etc. and

removal of form for :

a 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete.

b 5.9.2 Shuttering for Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc. Sqm 79.80 669.55 53430.09

c 5.9.3 Suspended floors, roofs, landings, balconies and access

platform. Sqm 108 766.55 82787.4

6 5.11 Extra for additional height in centering, shuttering where ever

required with adequate bracing, propping etc. including cost of

de-shuttering and decentering at all levels, over a height of 3.5

m, for every additional height of 1 metre or part thereof (Plan

area to be measured)

5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan

area to be measured). Sqm 187.80 319.25 59955.15

7 5.22 Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete up

to plinth level.

5.22.6 Thermo-Mechanically Treated bars. Kg 10162.37 89.65 911056.5

8 5.33 Providing and laying in position machine batched and machine

mixed design mix M-25 grade cement concrete for reinforced

cement concrete work, using cement content as per approved

design mix, including pumping of concrete to site of laying but

5.33.1 M25 RCC All works up to plinth level. Cum 79.17 8683.80 687496.45

9 5.35 Add for using extra cement in the items of design mix over and

above the specified cement content therein. Qntl 23.75 688.45 16351.38

10 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in all colours, shades, except White, Ivory,

Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4

(1 Cement : 4 Coarse sand), jointing with grey cement slurry @

3.3 kg/ sqm including pointing the joints with white cement and

matching pigments etc., complete. Sqm 44.80 1225.10 54884.48

Item No. Rate Amount

S.No (DSR-2021 Item Description Unit Qty.

/ Non-DSR) DSR 2021 Non-DSR DSR - 2021 NON DSR

11 11.46 Providing and laying Vitrified tiles in different sizes (thickness to

be specified by manufacturer), with water absorption less than

0.08 % and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick bed

of cement mortar 1:3 (1cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3 kg/sqm including grouting the joint

with white cement & matching pigments etc. complete.

10 13.16 6 mm cement plaster of mix :

TOTAL (DSR + NDSR) 2,126,726.33

ELECTRICAL WORKS IIT BHUBANESWAR

NBCC (INDIA) LIMITED

(A Govt. of India Enterprise)

NAME OF WORK - INTERNAL & EXTERNAL ELECTRICAL WORKS IN VARIOUS BUILDINGS OF IIT BHUBANESWAR AT

ARGUL CAMPUS, BHUBANESWAR

Abstract of Cost

DSR- 2022 Non DSR-Amount Total Amount

DSR- 2022 Non DSR-Amount Total Amount

S. No. Description

Amount (In Rs.) (In Rs.) (In Rs.)

A Internal & External Electrical Works 8,354,478.00 47,806,873.00 56,161,351.00

Total BOQ Value (DSR + Non-DSR) 62,661,657.00

Digitally signed by NEELESH

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK :INTERNAL & EXTERNAL ELECTRICAL WORKS AT ARGUL CAMPUS, IIT

BHUBANESWAR, ODISHA

S. NO. Description of Item DSR Amount Non DSR Amount

1 SUB HEAD - I - FEEDER PILLAR - 1,577,382.00

2 SUB HEAD: II CABLES & PIPE 5,141,021.25 13,065,977.00

3 SUB HEAD: III LIGHT FIXTURE - 5,557,812.00

4 SUB HEAD: IV STREET LIGHT POLE - 24,612,722.00

5 SUB HEAD: V Wiring 959,375.00 -

6 SUB HEAD VI - DISTRIBUTION SYSTEM 151,900.00 24,210.00

7 SUB HEAD VII - FIXTURES AND FITTINGS 5,535.00 209,178.00

8 SUB HEAD VIII - Earthing 1,904,567.00 -

9 SUB HEAD IX- AC Work & Ventilation Work 146,940.00 606,944.00

10 SUB HEAD X- DATA & NETWORKING 45,140.00 2,152,648.00

Grand Total (DSR +Non DSR) 56,161,351.000

Grand Total (DSR +Non DSR) 56,161,351.000

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK : INTERNAL & EXTERNAL ELECTRICAL WORKS AT ARGUL CAMPUS, IIT BHUBANESWAR, ODISHA

BILL OF QUANTITIES

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

SUB HEAD - I - FEEDER PILLAR

1 NDSR Lighting Feeder Pillar-1

Supply, assembly, erection, connecting, testing & commissioning of LT weather proof dust and

vermin proof, outdoor feeder pillar, fabricated out of suitable sized angle iron and flats and

covered with 3mm thick CRCA sheet steel including canopy, duly painted, both sides (front and

rear) openable with locking arrangement, rubber gasket cable glands, etc. bus bar supports . The

feeder pillars shall be complete with 3 phase and neutral bus bars of capacities as described

below ,copper FRLS control wiring with 1.5sq.mm, complete in all respects as per specifications as

required.with IP 55 rating. Rate shall include the Foundation excavation and refiling as per

approval of consulatant/client in all respect.

200A 4P MCCB - 1no.

3 Phase and neutral (100%N) aluminium bus bars of 250 amps. Capacity.

1 Nos MFM With RS485

Auto/manual Selector Switch and wiring up to terminal for remote/ local operation of contactor

ON/OFF/TRIP indication lamps

200A 4P MCCB - 1no.

200 AMP. 4P CONTACTOR WITH NO/ NC CONTACTS -1 set.

24 HOUR TIMER - 1 set. (Digital type )

25A 4P MCB (10ka) - 5 nos.

63A 4P MCB (16ka) - 5 no.

25A DP MCB (10ka) - 2 nos. ( Direct Without Timer O/g)

63A 4P MCB (16ka) - 1 nos. ( Direct Without Timer O/g)

16 AMP. SWITCH & SOCKET - 1 no. with in the feeder pillar.

Lighting Feeder Pillar-1 as above Set 1.00 366,833.00 366,833.00

2 NDSR Lighting Feeder Pillar-2

Digitally signed by NEELESH

1 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

Supply, assembly, erection, connecting, testing & commissioning of LT weather proof dust and

vermin proof, outdoor feeder pillar, fabricated out of suitable sized angle iron and flats and

covered with 3mm thick CRCA sheet steel including canopy, duly painted, both sides (front and

rear) openable with locking arrangement, rubber gasket cable glands, etc. bus bar supports . The

feeder pillars shall be complete with 3 phase and neutral bus bars of capacities as described

below ,copper FRLS control wiring with 1.5sq.mm, complete in all respects as per specifications as

required.with IP 55 rating. Rate shall include the Foundation excavation and refiling as per

approval of consulatant/client in all respect.

a. 200A 4P MCCB - 1no.

3 Phase and neutral (100%N) aluminium bus bars of 250/250 amps. Capacity.

1 Nos MFM With RS485

Auto/manual Selector Switch and wiring up to terminal for remote/ local operation of contactor

ON/OFF/TRIP indication lamps

b. 200A 4P MCCB - 1no.

200 AMP. 4P CONTACTOR WITH NO/ NC CONTACTS -1 set.

24 HOUR TIMER - 1 set. Digital )

25A 4P MCB (10ka) - 10 nos.

63A 4P MCB (10ka) - 6 no.

25A DP MCB (10ka) - 2 nos. ( Direct Without Timer O/g)

63A 4P MCB (10ka) - 1 no. ( Direct Without Timer O/g)

16 AMP. SWITCH & SOCKET - 1 no. with in the feeder pillar.

Lighting Feeder Pillar-2 as above Set 1.00 476,883.00 476,883.00

3 NDSR Lighting Feeder Pillar-4

Supply, assembly, erection, connecting, testing & commissioning of LT weather proof dust and

vermin proof, outdoor feeder pillar, fabricated out of suitable sized angle iron and flats and

covered with 3mm thick CRCA sheet steel including canopy, duly painted, both sides (front and

rear) openable with locking arrangement, rubber gasket cable glands, etc. bus bar supports . The

feeder pillars shall be complete with 3 phase and neutral bus bars of capacities as described

below ,copper FRLS control wiring with 1.5sq.mm, complete in all respects as per specifications as

required.with IP 55 rating. Rate shall include the Foundation excavation and refiling as per

approval of consulatant/client in all respect.

125 A 4P MCCB - 1no.

3 Phase and neutral (100%N) aluminium bus bars of 150 amps. Capacity.

Digitally signed by NEELESH

2 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

1 Nos MFM With RS485

Auto/manual Selector Switch and wiring up to terminal for remote/ local operation of contactor

ON/OFF/TRIP indication lamps

125A 4P MCCB - 1no.

125 AMP. 4P CONTACTOR WITH NO/ NC CONTACTS -1 set.

24 HOUR TIMER - 1 set. Digital )

25A DP MCB (10ka) - 2 nos.

25A 4P MCB (10ka) - 18 nos.

63A 4P MCB (10ka) - 1 no.

63A 4P MCB (10ka) - 2 no. ( Direct Without Timer O/g)

16 AMP. SWITCH & SOCKET - 1 no. with in the feeder pillar.

Lighting Feeder Pillar-4 as above Set 2.00 366,833.00 733,666.00

Total Sub Head - I - 1,577,382.00

SUB HEAD: II CABLES & PIPE

1 Supply & Testing of 1.1 kv grade XLPE insulated PVC sheathed steel armoured alluminium

stranded conductor ISI marked LT Cables In existing RCC/DWC pipes/Trench/Direct in ground as

required (Laying of cable shall be payable extra)

Digitally signed by NEELESH

3 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

2 Supply & Testing of 1.1 kv grade XLPE insulated PVC sheathed steel armoured Copper stranded

conductor ISI marked LT Cables In existing RCC/DWC pipes/Trench/Direct in ground as required

(Laying of cable shall be payable extra)

2.1 NDSR 4 core X 16 Sq.mm (Cu cable) Meter 300.00 1,215.00 364,500.00

2.2 NDSR 4 core X 10 Sq.mm (Cu cable) Meter 300.00 831.00 249,300.00

2.3 NDSR 4 core X 6 Sq.mm (Cu cable) Meter 1,167.00 551.00 643,017.00

2.4 NDSR 4 core X 4 Sq.mm (Cu cable) Meter 11,432.50 378.00 4,321,485.00

3 Supplying and making cable end termination with brass compression glands and aluminium lugs

including inhibiting compound to be used in each lug, for the following XLPE aluminium conductor

armoured cables of 1.1 KV grade etc, complete as required.

3.12 NDSR 4 core X 6 Sq.mm (Cu cable) Set 20.00 76.00 1,520.00

Digitally signed by NEELESH

4 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

3.13 NDSR 4 core X 4 Sq.mm (Cu cable) Set 10.00 72.00 720.00

4 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of

following size direct in ground including excavation, sand cushioning, protective covering and

refilling the trench etc. as required.

4.2 7.1.2 Above 35 sq. mm and upto 95 sq. mm Meter 500.00 405.00 202,500.00

4.4 7.1.4 Above 185 sq. mm and upto 400 sq. mm Meter 300.00 474.00 142,200.00

5 7.5 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size in the existing RCC/ HUME/ METAL pipe as required

5.2 7.5.2 Above 35 sq. mm and upto 95 sq. mm Meter 1,295.00 57.00 73,815.00

5.3 7.5.3 Above 95 sq. mm and upto 185 sq. mm Meter 2,850.00 77.00 219,450.00

5.4 7.5.4 Above 185 sq. mm and upto 400 sq. mm Meter 900.00 134.00 120,600.00

6 14.14 Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete

with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching

diarefilling etc. as required. Meter 100.00 662.00 66,200.00

6 14.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like

socket, bend, couplers, etc conforming to IS 14930 Part II complete with fitting and cutting

jointing etc direct in ground (75 Cm below ground level) including excavation and refilling the

trench but excluding sand cushioning and protective covering etc complete as required

Digitally signed by NEELESH

5 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

8 9.4 Supplying and making straight through joint with heat shrinkable kit including ferrules and other

jointing materials for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade as required.

9 NDSR Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1

cement : 4 coarse sand) with RCC top cover with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size ), Cover shall have suitable L channel on outer periphery with

proper resting arrangement with L channnel of suitable size, i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and

inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a

floating coat of neat cement complete as per approval of consultant/Client.

Digitally signed by NEELESH

6 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

10 NDSR Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1

cement : 4 coarse sand) with RCC top cover with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size ), Cover shall have suitable L channel on outer periphery with

proper resting arrangement with L channnel of suitable size, i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and

inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a

floating coat of neat cement complete as per approval of consultant/Client.

SUB HEAD: III LIGHT FIXTURE

1 NDSR Supplying and fixing of Asymeteric type of Power LED Flood Light with minimum 15500 Lumens

(at system level ) with C clamp mounting and die cast housing with High efficiency glass cover,

Lens PMMA , IP 66/ Impact resistance IK 08, System Power : Approximately 160-170 watt Final

LED wattage rating shall be as per lux level design , System Efficacy > 90% , Life L80B20 , 80K Hrs

, color temp : 5000K, Luminaire efficacy >90 lumen/Watt at system level, LED Drive Current : Not

more than 700 mA - Option for variation of drive current through hardware/switches is required,

Junction temperature (Tj): at the soldering point should not exceed 55 degree C + 10% over an

ambient temperature of 25degree C, Heat dissipation / heat sink : Well designed Thermal

management system with PDC Aluminum heat sink, Electrical safety & Conformation standards of Nos 6.00 22,274.00 133,644.00

luminaire : The luminaire should have manufactured as per IEC 60598 & Photobiological Safety

report is required. Manufacturer name should be embossed on Light Fixture. LM 79/ LM80 reports

should be produced to Architect/ Consultant/ Engineer incharge before procurement to verify the

technical parameters. Samples/TDS should be submitted before procurement for prior apporval

of Architect/ Consultant/ Engineer incharge.

2 NDSR SITC, of integral driver LED Steplight with a system lumen output of 480 lumens and a minimum

system efficacy of 80 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning

hours at L70B20. The luminaire should have a color temperature of 4000K and CRI should be

minimum 80. The luminaire shall meet IP66/IK08 with SS Frame AISI 316, PF > 0.9. The luminaire

shall have polycarbonate diffuser. The total power consumption should not exceed 9W (including

driver). Manufacturer name should be embossed on Light Fixture. LM 79/ LM80 reports should be

produced to Architect/ Consultant/ Engineer incharge before procurement to verify the technical

parameters. Sample/TDS has to be submitted before procurement for prior apporval of

Architect/ Consultant/ Engineer incharge.

Digitally signed by NEELESH

7 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

3 NDSR SITC of LED Post Top with a system lumen output minimum 2900 lumens and a minimum system

efficacy of >100 lm/W. The luminaire shall have a rated system lifetime of 80000 burning hours

at L80B10. The luminaire should have a color temperature of >4000K and CRI > 70. The luminaire

shall meet IP66/IK09 and PF > 0.9. The luminaire shall have closed diffused optics with

polycarbonate/glass diffuser board. The total power consumption should not exceed 35-45W

(including driver). Manufacturer name should be embossed on Light Fixture. LM 79/ LM80 reports

should be produced to Architect/ Consultant/ Engineer incharge before procurement to verify the

technical parameters. Sample/TDS has to be submitted before procurement for prior apporval

of Architect/ Consultant/ Engineer incharge.

4 NDSR SITC, of IP66/IK06 LED Street Light, Housing should be in Die Cast Aluminium Housing, Minimum

5500 lumens (Delivered) with system wattage 35-45W, With PMMA Lenses, External built

proper heat sinks and Toughen Glass/PC ensuring IP66 & IK >06, LED Used shall be Power LED

type and fixture should have minimum efficacy at System level (Not Chip Level) 120 lumens/watt,

Life of System should be 50000hrs@L80B20 along with inbuilt Driver, CCT >4000, CRI 80, PF >0.9,

The fixture should comply with the parameters as per IS10322 and IEC60598. The LED driver Nos. 170.00 3,698.00 628,660.00

should comply to IEC55015 -3 - 2 for Harmonics. Manufacturer name should be embossed on

Light Fixture. LM 79/ LM80 reports should be produced to Architect/ Consultant/ Engineer

incharge before procurement to verify the technical parameters. Sample/TDS has to be

submitted before procurement for prior apporval of Architect/ Consultant/ Engineer incharge

5 NDSR SITC of LED Bollard with minium 800mm height with a system lumen output of 400 lumens and a

minimum system efficacy of 50 lm/W. The luminaire shall have a rated system lifetime of 50,000

burning hours at L80B20. The luminaire should have a color temperature of 4000K and CRI>85.

The luminaire shall meet IP54 & IK03 rating with THD < 20% and PF > 0.9. The luminaire housing

should made of die cast aluminium with polycarbonate/Glass diffuser. The total power

consumption should not exceed 10W (including driver). Manufacturer name should be embossed nos. 15.00 9,596.00 143,940.00

on Light Fixture. LM 79/ LM80 reports should be produced to Architect/ Consultant/ Engineer

incharge before procurement to verify the technical parameters. Sample/TDS has to be

submitted before procurement for prior apporval of Architect/ Consultant/ Engineer incharge.

SUB HEAD: IV STREET LIGHT POLE

Digitally signed by NEELESH

8 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

1 NDSR Supply installtion testing commissionning of 4 mtr. long galvanised Tublar poles , suitable for

wind speed of 250 km/hr pole at site of works, made out of minimum 3mm thick Galvanized

sheet, duly painted with PU paint of approved colour/ shade, complete with 220mm x 220mm x

12 mm base plate with suitable hole for fixing the pole and suitable hinged opening with locking

arrangment. The pole shall be complete with 1 No. 16amp SP MCB and 1 numbers 20 amp. 3

phase, 4 way connectors as required including 2nos. earthing stud with a set of 4 numbers M20 x

600mm long "J" type EN 8 grade foundation bolts along .The pole shall be made of 3 mm

thickness sheet with tolerance of +/- 5%. The column shall also be provided with flush door at the

bottom with proper strengthening to the cutout of the door opening, a junction/ looping box with

including all accessories complete as required. (make & model will be selected by the client). RCC

Foundation and foundation Excavatiobn will be piad separatly.

2 NDSR Supply installtion testing commissionning of 6.0 metre high (above ground) hot dip galvanized

(grading of galvenisation average 70 micron or better as per IS2629 or equivalent) octagonal pole,

suitable for wind speed 250km/hr as per IS 875 Part-3, along with allen bolt, single arm bracket

one metre long, M20 x 1000mm long "J" type EN 8 grade foundation bolts, anchor plate,

template, rubber gasket nut and washers galvanized, factory finish base plate of size 250 x 250 x

12 mm etc complete as required. The pole shall be made of 3 mm thickness sheet with tolerance

of +/- 5%. The column shall also be provided with flush door at the bottom with proper

strengthening to the cutout of the door opening, a junction/ looping box with Heavy duty 3 phase,

32 Amp connector with 20A SP MCB including all accessories complete as required. (make &

model will be selected by the client). RCC Foundation and foundation Excavatiobn will be piad

3 NDSR Supply installtion testing commissionning of 7.0 metre high (above ground) hot dip galvanized

(grading of galvenisation average 70 micron or better as per IS2629 or equivalent) octagonal pole,

suitable for wind speed 250km/hr as per IS 875 Part-3, along with allen bolt, single arm bracket

one metre long, M20 x 1000mm long "J" type EN 8 grade foundation bolts, anchor plate,

template, rubber gasket nut and washers galvanized, factory finish base plate of size 250 x 250 x

12 mm etc complete as required. The pole shall be made of 3 mm thickness sheet with tolerance

of +/- 5%. The column shall also be provided with flush door at the bottom with proper

strengthening to the cutout of the door opening, a junction/ looping box with Heavy duty 3 phase,

32 Amp connector with 20A SP MCB including all accessories complete as required. (make &

model will be selected by the client). RCC Foundation and foundation Excavatiobn will be piad

Digitally signed by NEELESH

9 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

4 NDSR Supply installtion testing commissionning of 9 Meter hot dip galvanized (grading of galvenisation

average 70 micron or better as per IS2629 or equivalent) Octagonal Pole with height 9000mm,

Top Dia 70mm and Bottom dia 155mm, Thickness 3mm, Base Plate diemension= 260x260x20mm.

Foundation Bolt should have diemnesion :- Length 1000mm and Dia=24mm. The column shall also

be provided with flush door at the bottom with proper strengthening to the cutout of the door

opening, a junction/ looping box with Heavy duty 3 phase, 32 Amp connector with 20A SP MCB

including all accessories complete as required. (make & model will be selected by the client). RCC

Foundation and foundation Excavatiobn will be piad separatly.

5 NDSR Supply and fixing of RCC foundation including shuttering and Excavation for 4 meter pole

foundation as per approved design and concrete grade, refeling after placing of foundation etc. Nos

complete in all resepect. 457.00 6,071.00 2,774,447.00

6 NDSR Supply and fixing of RCC foundation including shuttering and Excavation for 6 meter pole

foundation as per approved design and concrete grade, refeling etc complete in all resepect. Nos

7 NDSR Supply and fixing of RCC foundation including shuttering and Excavation for 7 meter pole

foundation as per approved design and concrete grade, refeling etc complete in all resepect. Nos

8 NDSR Supply and fixing of RCC foundation including shuttering and Excavation for 9 meter pole

foundation as per approved design and concrete grade, refeling etc complete in all resepect. Nos 12.00

9 Supply of solar power Street Lighting Fixture complete with 7.0 meter long poles as per approved

makes and as per standard design. The luminaire shall be of aluminium die cast construction with

minimum IP65 protection with inter-connection copper cable from solar panel to battery, to

controller and to luminaire etc as required.

The storage capacity of the battery should be sufficient to run the full load for 18 hours on rainy/

heavy cloudy days. The unit should also have an additional AC charging arrangement to charge the

batteries in case of very long heavy cloudy days

A junction chamber of size 300mm/ 100mm with cable termination arrangement connector block

and 1 No. 10 Amp SPMCB shall be provided. The street light fixture shall be 1 x (60-70) watt

capacity with LED bulbs of white colour of 1 watt each. the fixture shall be complete with control

gear for auto switching ON, switching OFF supplementary power charging in case of non Nos 50.00 158,661.00 7,933,050.00

availability of solar power on very long heavy cloudy days etc. as required. The solar panel shall be

of sufficient capacity to charge the sealed maintenance free battery of minimum 150 AH capacity.

Digitally signed by NEELESH

10 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

SUB HEAD: V Wiring

1 1.10.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC Point 100.00 1,015.00 101,500.00

insulated copper conductor single core cable etc as required.

2 1.12 Wiring for light / power plug with 2 x 4 sq. mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit along with 1 No. 4 sq. mm FR PVC insulated

copper conductor single core cable for loop earthing as required.

3 1.13 Wiring for light / power with 4 x 4 sq. mm FRLS PVC insulated copper conductor single core cable

in surface / recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FR PVC insulated 50.00 537.00 26,850.00

copper conductor single core cable for loop earthing as required. Metre

4 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

5 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps 586.00 43,950.00

modular switch, connection, painting etc. as required. Each 75.00

6 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, 477.00 35,775.00

connections etc. as required. Each 75.00

7 1.21 Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess

including painting in case of surface conduit, or cutting the wall and making good the same in case -

of recessed conduit as required.

Digitally signed by NEELESH

11 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

SUB HEAD VI - DISTRIBUTION SYSTEM

1 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 volts, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din

bar, interconnections, powder painted including earthing etc.as required. (But without

MCB/RCCB/Isolator)

2 2.5 Supplying and fixing of following ways surface/ recess mounting,

vertical type, 415 volts, TPN MCB distribution board of sheet steel,

dust protected, duly powder painted, inclusive of 200 amps tinned

copper bus bar, common neutral link, earth bar, din bar for

mounting MCB's (but without MCB's and incomer ) as required.

(Note : Vertical type MCB TPDB is normally used where 3 phase

outlets are required.)

3 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/ Isolator)

4 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker

suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

4.3 2.10.5 Triple Pole & Neutral Each 10.00 1,228.00 12,280.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Digitally signed by NEELESH

12 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

6 2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 325.00

8 NDSR Supply and fixing of Outdoor type Enclusre Box (200*150*80mm) with suitable din rail

arrangement for fixing of MCCB, Isolator, Junction terminal etc. along with MS channle for fixing 24,210.00

on Wall/ ground Each 15.00 1,614.00

SUB HEAD VII - FIXTURES AND FITTINGS

1 Supply. Installation, connecting, testing and commissioning of the following light fixtures complete

with housing, reflectors, all accessories i.e.drivers, starters, holders, hanging/fixing arrangements

etc. complete as required

1.1 NDSR 1X12W Surface/Recess Type Downlighter Led Light Nos. 16.00 1,507.00 24,112.00

1.2 NDSR 1X18W Surface/Recess Type Downlighter Led Light Nos. 32.00 2,054.00 65,728.00

1.3 NDSR 1X10W Wall Bracket Light/Buld Head Light Nos. 10.00 2,054.00 20,540.00

1.4 NDSR 10 W LED Mirror Light Nos. 16.00 555.00 8,880.00

1.5 NDSR 20W Wall/Surface LED Tube Light Nos. 16.00 668.00 10,688.00

2 Supply. Installation, connecting, testing and commissioning of the following fixtures complete

with housing, fixing frame hanging/fixing arrangements etc. complete as required

2.1 NDSR Ceiling Fan 1200 MM Sweep ( Minimum 2 Star BEE rating ) Nos. 15.00 2,641.00 39,615.00

2.2 NDSR Exhaust Fan (200-300mm Dia) Fiber/Plastic Body Nos. 5.00 2,054.00 10,270.00

2.3 NDSR Exhaust Fan (200-300mm Dia) MS Body Nos. 5.00 5,869.00 29,345.00

Digitally signed by NEELESH

13 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

3 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular

plate switch box including connections but excluding modular plate etc. as required. 15.00 369.00 5,535.00

SUB HEAD VIII - Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

1 5.4 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre

long etc. with charcoal/ coke and salt as required. Set 50.00 7,472.00 373,600.00

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with

existing surface/ recessed conduit/ submain wiring/ cable as required. Meter 9,146.00 42.00 384,132.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

4 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of

2.7 metre long etc. with charcoal/ coke and salt as required. Set 25.00 13,838.00 345,950.00

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth

electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode,

including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing

shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X

50 cm at the top with a thickness of 10cm including

inscription duly engraved as required. Each 20.00 585.00 11,700.00

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with

8 7.10 inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing

the same in ground as required. Each 20.00 528.00 10,560.00

Digitally signed by NEELESH

14 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

SUB HEAD IX- AC Work & Ventilation Work

1 NDSR Providing, fixing, testing and commissioning of following capacities of Hi Wall type split

air_x005fcondi oning units suitable for opera on on 230±10% volt, 50 Hz, 1 phase power supply,

with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with hermetically

sealed rotary / scroll compressor condenser coil, propeller fans controls, control panel, Including

control wiring, necessary power cable Copper piping, Drain pipe ODU stand etc. (Minimum 3 star

2 NDSR Supplying, installting, testing and commissioning of Inline fan for fresh/ exhaust air with

centrifugal blower and motor encased in sheet metal casing, as per specifications. The motor shall

be suitable for 220 voltage, 1 phase, 50 cycle AC cycle.

2.1 NDSR 800 CFM at 12 mm Static Pressure (Exhaust) Set 2.00 23,267.00 46,534.00

3 NDSR Supplying, installation, testing and commissioning of Axial flow fan for lift well pressrization of

following capacity with powder coated M.S. casing and aluminium alloy impellers with high

efficiency aero-foil sections, blades, the impeller directly driven by TEFC induction motor (motor

should be of high efficiency (Eff 1) suitable for 3 Phase 50 Hz 415 V ± 10 %,1400 RPM of class 'F'

insulation etc. complete as required and as per specifications (For Supply). MS foundation for

fixing of Fans as per design inculded in cost.

4 16.12 Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers,

vanes, hangers, supports etc. as per approved drawings and

specifications of following sheet thickness complete as required.

5 16.15 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

control dampers as per specifications. Sqm

Digitally signed by NEELESH

15 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

6 Fabrication,Supplying,Assembling,Erecting, Connecting, Testing & Commissioning of Dust,Damp

and vermin proof free wall mounted (PTTA Type) sheets steel enclosed non draw out modular

type LT Panel fabricated out of suitable sized angle iron and flats, base channel and covered with

2 mm / 1.6 mm thick CRCA sheet, duly painted complete with earth bus , aluminium bus bar ,

numbering and sign writing , inter connection and including the cost of connection through bus -

bar / copper conductor flexible connection per specification and mounted with the mountings as

mentioned in the details attached etc as required. The panel shall have facilty for receiving the

signal from Fire alarm panel for auto operation

Incoming - 63 A FP MCCB, ON/OFF/TRIP indiaction & Auto manual Selector Swith Set 1.00 88,040.00 88,040.00

Outgoing - 4 HP DOL starter 2 Nos

Total SUB HEAD IX 146,940.00 606,944.00

SUB HEAD X- DATA & NETWORKING

1 Supplying and fixing following modular switch / socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

NDSR Socket for RJ 45 Jack for Cat - 6A Cable Each 25.00 558.00 13,950.00

2 NDSR Supplying & drawing of 4-pair Unshielded twisted pair with a cross filler (+), meeting Category 6A

standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall be Fire-Retardant, Low-

Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-2 & IEC 60754-1 respectively.

3 NDSR Supplying & Fixing of UTP Jack Panel, loaded with 24 nos UTP ports for Non-PCB based IO Jacks

(RJ45, TIA-568C Category-6A, Shall have integrated bonding bar or other mechanism for

grounding, Shall be loaded with individually replaceable 24 nos. Category-6A certification by Jacks

complying with TIA-568.C.2 , Shall be having a 6 port module construction for better cable

dressing at the rear, the jacks shall have RJ-45 type connector with bend limiting and strain relief

boot for securing IDC contacts from external forces and for maintaining the bend radius of the

cable complete in all respect.

4 NDSR Supplying & Fixing of Category 6A, UTP patch cords shall be constructed of 24-27 AWG unshielded

twisted pair stranded copper cable with an enhanced performance modular plug at each end.

Patch cord cable shall be offered in multiple colored UTP cable for design flexibility with a clear

strain relief boot on each modular plug. All patch cords shall be compatible with both T568A and

T568B wiring schemes. UTP Cable will be 1.0 mtr. complete in all respect. Jacket - LSZH

Digitally signed by NEELESH

16 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

5 NDSR Supplying & Fixing of Fiber Optic LC style fully loaded Patch Panel (FOPP), 19" Rack Mount ,Shall

have all accessories including coupler plates pre loaded with 12 Nos of LC couplers (OM3) with

all accessories complete in all respect. Pigtails Should Complie to ITU-G657.B-Bend insestive fiber.

6 NDSR Supplying & Fixing of Fiber Optic LC style fully loaded Patch Panel (FOPP), 19" Rack Mount ,Shall

have all accessories including coupler plates pre loaded with 24 Nos of LC couplers (OM3) with

all accessories complete in all respect. Pigtails Should Complie to ITU-G657.B-Bend insestive fiber

7 NDSR Supplying & Fixing of Fiber Optic Patch Cable (LC-LC), 2 Mtrs. Long, ISO/IEC-11801-OM3 50μ

Duplex, LSZH,All patch cords shall conform to EIA/TIA-568C.3 and ISO/IEC-11801,Shall be Duplex

Multi Mode Fiber Optic Patch Cords OM3 50μ,Shall support network line speeds up to 10

Gbps.Shall have LC-LC Connector connectors at the ends complete in all respect.

8 NDSR Supply & Fixing of OM3 50/125μ Type Pigtails of ISO/IEC-11801-OM3 Pigtails with LC Type

Connectors,pigtails for terminating fibers on the FOPP complete in all respect. Nos. 96.00 308.00 29,568.00

9 NDSR Supplying, Installation, Testing & Commissioning of 50μ, 6-core Multi mode OM3 metallic

armored Fiber cable as per ISO/IEC-11801, Shall be able to meet Gigabit & 10 Gigabit Ethernet

performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) & IEEE 802.3ae

(10G Base-X) Tensile load should be 4000 Newton or higher and crush resistance should be 4000

Newton or higher ,The attenuation @ 850 nm should be ≤ 2.7 (Max) db/Km and @ 1300 nm

should be ≤ 0.7 (Max) dB/Km, the fiber construction can be unitube or multitube, but tensile and

crush resistance parameters should be matched, the jacket shall be FRLSZH complete in all

10 NDSR Supplying, Installation, Testing & Commissioning of 50μ, 6-core Single Mode OM3 metallic

armored Fiber cable as per ISO/IEC-11801, The fiber construction can be unitube or multitube, but

tensile and crush resistance parameters should be matched, the jacket shall be FRLSZH complete

in all respect. Meter 5,000.00 269.00 1,345,000.00

11 NDSR Supplying & Fixing of F wall mounted Network/Server Rack - 9U with Heavy Duty Extruded

Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable

entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels -

3 pairs. PDU 5 Sockets 5/15Amps with MCB Mounting Hardware (Pkt. Of 20) earthing Kit

150mmH Cable manager 1U MS with Loops complete in all respect.

Digitally signed by NEELESH

17 OF 18 SAHU NBCC (I) LTD.

ELECTRICAL WORKS IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. NO. Item Description Unit Qty.

/ Non- DSR 2022 Non-DSR DSR - 2022 Non- DSR

12 1.20 Supplying and fixing of following sizes of steel conduit along with accessories in surface / recess

including painting in case of surface conduit, or cutting the wall and making good the same in case

of recessed conduit as required.

13 1.27 Supplying and fixing following size/ modules, GI box alongwith

modular base & cover plate for modular switches in recess etc.

Total SUB HEAD X 45,140.00 2,152,648.00

Digitally signed by NEELESH

18 OF 18 SAHU NBCC (I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK - LT PANELS FOR ARGUL CAMPUS, IIT BHUBANESWAR, ODISHA

BILL OF QUANTITIES

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

1 NDSR MAIN LT PANEL- ESSENTIAL TYPE

Fabrication,Supplying,Assembling,Erecting,Connecting, Testing & Commissioning

of Dust,Damp and vermin proof free floor standing (TTA Type)/ wall mounted

(PTA Type) sheets steel enclosed non draw out modular type LT Panel fabricated

out of suitable sized angle iron and flats, base channel and covered with 2 mm /

1.6 mm thick CRCA sheet, duly painted complete with earth bus , aluminium bus

bar , numbering and sign writing , inter connection and including the cost of

connection through bus bar / copper conductor flexible connection with

necessary inter locking with existing panel as per specification and mounted

with the mountings as mentioned in the details attached etc as required.

All MCCB (Incoming+Outgoing) in panels shall have aux NO+NC contacts for

remote status (ON/OFF/TRIP)

1 No. - 200 Amp. 4 pole 20kA MCCB with with Microprocessor based over load/

short circuit , earth fault protection. Along with ON/OFF/TRIP Indication on

panel door and potential free NO/NC status of the same for 3rd party

1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup

1 No. Intelligent multifunction (MD recording Type with date & time) digital

panel meters of class 1.0 accuracy V (Between Phases and between each phase

and neutral), A (In each phase and neutral), KWHr,KVA,KW with suitable rating

CTs, CT shorting links,with RS port etc

Digitally signed by NEELESH

1 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

Three phase and 100% neutral Aluminium extensible type busbars rated at

415V, 250 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

Following rated 415V, MCB/MCCB's with overcurrent and short circuit releases,

front operating handle & door interlock,etc mentioned in specifications and as

required. For each outgoing:

125A, FP 16KA, MCCB manually operated - Total 3 Nos. with ON indication on

Panel door and status of ON/OFF/TRIP on Terminals for third party integration

100A, FP 16KA, MCCB manually operated - Total 2 Nos. with ON indication on

Panel door and status of ON/OFF/TRIP on Terminals for third party integration

63A, FP, MCCB 10kA MCCB manually operated - 9 Nos. with ON indication on

Panel door and status of ON/OFF/TRIP on Terminals for third party integration

MAIN LT PANEL - ESSENTIAL Described as above. Set 1 744,107.00 744,107.00

2 NDSR LT PANEL : NON ESSENTIAL TYPE (GF)

Fabrication,Supplying,Assembling,Erecting,Connecting, Testing & Commissioning

of Dust,Damp and vermin proof free floor standing (TTA Type)/ wall mounted

(PTA Type) sheets steel enclosed non draw out modular type LT Panel fabricated

out of suitable sized angle iron and flats, base channel and covered with 2 mm /

1.6 mm thick CRCA sheet, duly painted complete with earth bus , aluminium bus

bar , numbering and sign writing , inter connection and including the cost of

connection through bus bar / copper conductor flexible connection with

necessary inter locking with existing panel as per specification and mounted

with the mountings as mentioned in the details attached etc as required.

All MCCB (Incoming+Outgoing) in panels shall have aux NO+NC contacts for

remote status (ON/OFF/TRIP)

Digitally signed by NEELESH

2 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

1 No. -160 Amp. 4 pole 16kA Motorized MCCB with Microprocessor based over

load/ short circuit , earth fault protection. Along with ON/OFF/TRIP Indication

on panel door and potential free NO/NC status of the same for 3rd party

1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup

1 No. Intelligent multifunction (MD recording Type with date & time) digital

panel meters of class 1.0 accuracy V (Between Phases and between each phase

and neutral), A (In each phase and neutral), KWHr,KVA,KW with suitable rating

CTs, CT shorting links,with RS port etc

Three phase and 100 % neutral Aluminium extensible type busbars rated at

415V, 200 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

Following rated 415V, MCB/MCCB's with overcurrent and short circuit releases,

front operating handle & door interlock,etc mentioned in specifications and as

required. For each outgoing:

100A, FP, MCCB 16kA - 3 Nos. with ON indication on Panel door and status of

ON/OFF/TRIP on Terminals for third party integration

MAIN LT PANEL - NON ESSENTIAL TYPE- Described as above. Set 1 299,461.00 299,461.00

3 NDSR HVAC PANEL -1 ( For VFD Panel Supply)

Digitally signed by NEELESH

3 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

Supplying, installation, testing and commissioning of dust, damp and

vermin proof free floor, indoor type standing factory built sheet steel enclosed

modular construction extendable panel, suitable for operation on 415±10%

volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square

tubular section and covered with CRCA sheet steel of 1.6mm thick for frame

work and covers, 3mm thick for gland plates i/c cleaning & finishing complete

with 7 tank process for powder coating in approved shade, complete with

Aluminium bus bars, inter- connection with solid copper conductor wires /

aluminium strips, neutral links, earth bus etc. necessary metering protections

& indications and mounted with the following as per drawing and technical

specifications attached etc.

Complete as required. Control wiring with 1.5 sq.mm. PVC insulated FRLS

copper conductor Single Core cable. Each starter should have remote

control and interlocking facilities including auto manual switch, NO/NC contacts

for BMS control etc. complete as required.

The Panel should be IBMS compatible.

1 No. -100 Amp. 4 pole 16kA MCCB with Microprocessor based over load/ short

circuit , earth fault protection. Along with ON/OFF/TRIP Indication on panel door

and potential free NO/NC status of the same for 3rd party integration

1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup

1 No. Intelligent multifunction (MD recording Type with date & time) digital

panel meters of class 1.0 accuracy V (Between Phases and between each phase

and neutral), A (In each phase and neutral), KWHr,KVA,KW with suitable rating

CTs, CT shorting links,with RS port etc

Three phase and 100 % neutral Aluminium extensible type busbars rated at

415V, 160 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

Digitally signed by NEELESH

4 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

Following rated 415V, MCB/MCCB's with overcurrent and short circuit releases,

front operating handle & door interlock,etc mentioned in specifications and as

required. For each outgoing:

63A, FP, MCB 10kA - 1 Nos. with ON indication on Panel door

32A, FP, MCB 10kA - 5 Nos. with ON indication on Panel door

20A, FP, MCB 10kA - 9 Nos. with ON indication on Panel door

HVAC PANEL -1- Described as above. Set 1 216,310.00 216,310.00

4 NDSR VANTILLATION PANEL G.F & 1st Floor

Supplying, assembling, erecting, connecting, testing and commissioning of dust,

damp and vermin proof free floor standing factory built sheet steel enclosed

non- drawout modular type Ventillation Panel fabricated out of 2.0mm

thick CRCA sheet hinged doors of 1.6mm thick CRCA sheet, duly painted

complete with earth bus, aluminium bus bar, numbering & sign writing,

interconnection & including the cost of connection through bus bar /

copper conductor flexible connection with necessary interlocking with existing

panel as shown in drawing as per specification and mounted with the

The Panel should be IBMS compatible.

63 Amp FP, 16 kA MCCB - 1 No.

3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker '

ON/OFF' indicating light with 2A MCB

1 No. Intelligent multi-function digital panel meters of class 0.5 accuracy

with communication interface port R 485 for recording V (Between Phases

and between each phase and neutral, A (In each phase and neutral),

KWHr with suitable rating CTs, CT shorting links, R,Y, B LED indicating lamp

and 2 A control SP MCB's.

Three phase and 100 % neutral Aluminium extensible type busbars rated at

415V, 100 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

Digitally signed by NEELESH

5 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

Following ratinr DOL starter for Axial fan with nessesary interlocking of AHU fire

& Axial fan fire damper with common auto manual suitable for intration of Fire

alarm/HVAC/ and BMS integration

5 set ( 2 Nos of 1.25 KW DOL with 2 nos of 16 Amp TP MCB 10kA )

3 set (4 Nos of 1.25 KW DOL with 4 nos of 16 Amp TP MCB 10kA )

6 Amp DP 10kA MCB with Suitable Step down transformer 220V AC to 24V AC &

connected with 25 Amp DP MCB for Damper Actuators

6 Amp DP 10kA MCB with AC to DC Rectifier & connected with 25 Amp DP

MCB for control Supply.

6 Amp DP 10kA MCB - Spare

VANTILLATION PANEL G.F - Described as above. Set 2 760,239.00 1,520,478.00

5 NDSR VANTILLATION PANEL S.F

Supplying, assembling, erecting, connecting, testing and commissioning of dust,

damp and vermin proof free floor standing factory built sheet steel enclosed

non- drawout modular type Ventillation Panel fabricated out of 2.0mm

thick CRCA sheet hinged doors of 1.6mm thick CRCA sheet, duly painted

complete with earth bus, aluminium bus bar, numbering & sign writing,

interconnection & including the cost of connection through bus bar /

copper conductor flexible connection with necessary interlocking with existing

panel as shown in drawing as per specification and mounted with the

The Panel should be IBMS compatible.

63 Amp FP, 16 kA MCCB - 1 No.

3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker

'ON/OFF' indicating light with 2A MCB

1 No. Intelligent multi-function digital panel meters of class 0.5 accuracy

with communication interface port R 485 for recording V (Between Phases

and between each phase and neutral, A (In each phase and neutral),

KWHr with suitable rating CTs, CT shorting links, R,Y, B LED indicating lamp

and 2 A control SP MCB's.

Digitally signed by NEELESH

6 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

Three phase and 100 % neutral Aluminium extensible type busbars rated at

415V, 100 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

Following ratinr DOL starter for Axial fan with nessesary interlocking of AHU fire

& Axial fan fire damper with common auto manual suitable for intration of Fire

alarm/HVAC/ and BMS integration

5 set ( 2 Nos of 1.25 KW DOL with 2 nos of 16 Amp TP MCB 10kA )

6 Amp DP 10kA MCB with Suitable Step down transformer 220V AC to 24V AC &

connected with 25 Amp DP MCB for Damper Actuators

6 Amp DP 10kA MCB with AC to DC Rectifier & connected with 25 Amp DP

MCB for control Supply.

6 Amp DP 10kA MCB - Spare

VANTILLATION PANEL F.F & S.F - Described as above. Set 1 407,983.00 407,983.00

6 NDSR AHU PANEL G1,G4, F1, F4, S1, S2, S3, S4,

Supplying, assembling, erecting, connecting, testing and commissioning of dust,

damp and vermin proof free floor standing factory built sheet steel enclosed

non- drawout modular type AHU Panel fabricated out of 2.0 mm thick

CRCA sheet hinged doors of 1.6mm thick CRCA sheet, duly painted complete

with earth bus, aluminium bus bar, numbering & sign writing,

interconnection & including the cost of connection through bus bar / copper

conductor flexible connection with necessary interlocking with existing

panel as shown in drawing as per specification and mounted with the

The Panel should be IBMS compatible.

1 Nos. 32 amps, 415V 4P MCB '16ka' with overcurrent and short circuit TM

1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup

Digitally signed by NEELESH

7 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

Three phase and 100 % neutral Aluminium extensible type busbars rated at

415V, 40 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

1 Set - 25 Amp TP MCB with 3.7 kW VFD with fire alarm & AHU door interlocking

. The outgoing shall have Auto/Manual Switch, ON/OF/Trip/Indication with

START/STOP push Buttom

6 Amp DP 10kA MCB with Suitable Step down transformer 220V AC to 24V AC &

connected with 25 Amp DP MCB for Damper Actuators

6 Amp DP 10kA MCB with AC to DC Rectifier & connected with 25 Amp DP

MCB for control Supply.

6 Amp DP 10kA MCB - Spare

AHU PANEL as - Described as above. Set 8 139,905.00 1,119,240.00

7 NDSR AHU PANEL G2, G3, F2, F3

Supplying, assembling, erecting, connecting, testing and commissioning of dust,

damp and vermin proof free floor standing factory built sheet steel enclosed

non- drawout modular type AHU Panel fabricated out of 2.0 mm thick

CRCA sheet hinged doors of 1.6mm thick CRCA sheet, duly painted complete

with earth bus, aluminium bus bar, numbering & sign writing,

interconnection & including the cost of connection through bus bar / copper

conductor flexible connection with necessary interlocking with existing

panel as shown in drawing as per specification and mounted with the

The Panel should be IBMS compatible.

1 Nos. 63 amps, 415V 4P MCB '16ka' with overcurrent and short circuit TM

1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup

Three phase and 100 % neutral Aluminium extensible type busbars rated at

415V, 40 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

Digitally signed by NEELESH

8 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

1 Set - 25 Amp TP MCB with 3.7 kW VFD with fire alarm & AHU door interlocking

. The outgoing shall have Auto/Manual Switch, ON/OF/Trip/Indication with

START/STOP push Buttom

2 Set - 40 Amp TP MCB with 5.5 kW VFD with fire alarm & AHU door interlocking

. The outgoing shall have Auto/Manual Switch, ON/OF/Trip/Indication with

START/STOP push Buttom

6 Amp DP 10kA MCB with Suitable Step down transformer 220V AC to 24V AC &

connected with 25 Amp DP MCB for Damper Actuators

6 Amp DP 10kA MCB with AC to DC Rectifier & connected with 25 Amp DP

MCB for control Supply.

6 Amp DP 10kA MCB - Spare

AHU PANEL as - Described as above. Set 4 297,262.00 1,189,048.00

8 NDSR TFA PANEL T1

Supplying, assembling, erecting, connecting, testing and commissioning of dust,

damp and vermin proof free floor standing factory built sheet steel enclosed

non- drawout modular type AHU Panel fabricated out of 2.0 mm thick

CRCA sheet hinged doors of 1.6mm thick CRCA sheet, duly painted complete

with earth bus, aluminium bus bar, numbering & sign writing,

interconnection & including the cost of connection through bus bar / copper

conductor flexible connection with necessary interlocking with existing

panel as shown in drawing as per specification and mounted with the

The Panel should be IBMS compatible.

1 Nos. 32 amps, 415V 4P MCB '16ka' with overcurrent and short circuit TM

1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup

Three phase and 100 % neutral Aluminium extensible type busbars rated at

415V, 40 amps capacity insulated with heat shrinkable coloured PVC sleeves.

(Short time rating as per IS/IEC)

Digitally signed by NEELESH

9 of 10 SAHUNBCC(I) LTD.

LT PANEL IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

(DSR-2022 / Item Description Unit Qty. DSR DSR -

NO. Non - DSR Non- DSR

Non-DSR) 2022 2022

16 Amp TP MCB - 4 No. with 1.5 kW VFD with fire alarm & AHU door

interlocking . The outgoing shall have Auto/Manual Switch,

ON/OF/Trip/Indication with STAR/STOP push Buttom

3 Set - 16 Amp TP MCB with 3.7 kW VFD with fire alarm & AHU door interlocking

. The outgoing shall have Auto/Manual Switch, ON/OF/Trip/Indication with

STAR/STOP push Buttom

6 Amp DP 10kA MCB with Suitable Step down transformer 220V AC to 24V AC &

connected with 25 Amp DP MCB for Damper Actuators

6 Amp DP 10kA MCB with AC to DC Rectifier & connected with 25 Amp DP

MCB for control Supply.

6 Amp DP 10kA MCB - Spare

AHU PANEL - Described as above. Set 1 594,963.00 594,963.00

9 NDSR Changover Panel

SITC of Indoor type 800A Manual Changerover switch with Remote opeartion

Provision. The Panel shall have ON/OFF/TRIP indication Set 1 408,716.00 408,716.00

Digitally signed by NEELESH

10 of 10 SAHUNBCC(I) LTD.

FIREFIGHTING WORK IIT BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK - FIRE FIGHTING WORK AT IIT BHUBANESWER

S. No. Description DSR -2022 Non DSR

Amount (Rs.) Amount (Rs.)

1 SUB HEAD - I - ( PUMPING EQUIPMENTS) 1,084,433.00 34,502.00

2 Sub Head - II (Motor Control Panels) 245,730.00 -

3 Sub Head - III (Cables) 5,968.00 76,504.00

4 SUB HEAD - IV - (PIPING, VALVES AND ACCESSORIES) 1,528,792.00 163,013.00

Grand Total (DSR +Non DSR) 3,138,942.00

Grand Total (DSR +Non DSR) 3,138,942.00

Digitally signed by NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK - FIRE FIGHTING WORKS IN SAC AT IIT BHUBANESWER

BILL OF QUANTITIES

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

SUB HEAD - I - ( PUMPING EQUIPMENTS)

1 18.1 Supplying, installation, testing and commissioning of Electric driven

Main Fire Pump suitable for automatic operation and consisting of

following, complete in all

respects, as required :

a) Horizontal type, multistage, centrifugal, split casing pump of cast iron

body & bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520.

b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed

1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as require

d) Suitable cement concrete foundation duly plastered with anti vibration

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

Note: *The head of the pump is selected in a manner so as to give a

minimum 3.5kgf/cm2 pressure at the highest/farthest point.

2 18.2 Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and consisting

of following, complete in all respects, as required : (Diesel Driven Pump)

a) Horizontal type, multistage, centrifugal pump of cast of iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to

b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant IS standard complete with auto starting

mechanism, 12 /24 volts electric starting equipment, diesel tank,

exhaust pipe extended upto 10 m outside pump house duly insulated

with 50 mm thick glass wool with 1.0 mm thick aluminium sheet

cladding, residential silencer, instruments and protection as per

standard specification, stop solenoid for auto stop in the event of fault

with audio indications, painted with post office red colour etc. as

c) M.S fabricated, common base plate, coupling, coupling

guard, foundation bolts etc. as required.

d) Suitable cement concrete foundation duly plastered and with anti

vibration pads.

Note: * The head of the pump is selected in a manner

so as to give a minimum 3.5kgf/cm2 pressure at the

highest/farthest point.

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

3 18.3 Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

a) Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to

b) Suitable HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation,conforming to IS : 325.

c) M.S.fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

d) Suitable cement concrete foundation duly plastered and with anti

vibration pads.

4 NDSR Fabricating, Supplying, Installation, Testing and Commissioning Air

Vessel of continuous welded construction with flanged discharge

header in pump house fabricated out of 10 mm thick dished ends and 8

mm thick MS sheet, Air Release Valve, complete with drain

arrangement with 25 mm dia gun metal wheel valve complete with all

accessories etc. as required of the following sizes:

4.1 2 Meter high and 450 mm dia suitable to operate Jockey Pump, Main Each 1 34,502.00 34,502.00

Fire Pump & Diesel Engine Driven Fire Pump (complying with contract

technical specifications)

Sub Head - II (Motor Control Panels)

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

NOTE: All panel shall be completely modular and compartmentalized

with Form 4B Separation as per IEC 61439. The panel shall be free

standing floor mounted type . The panel shall be TTA and shall be

manufactured as per IEC 61439.

1 18.5.1 CONTROL PANELS

5 Fabrication, supply, Insallation testing & commissioning of Electrical

control panel of cubical construction, floor mounted type, fabricated

out of 2mm thick CRCA sheet, compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated of approved shade after 7

tank treatment process, cable alley, interconnection with suitable size

copper conductor cable/solid copper strip, having switchgears and

accessories, mountings and internal wiring, earth terminals, numbering

etc. complete in all respect,suitable for main fire pump, pressurisation

pump & diesel pump set complete as per CPWD specification with

following in coming and Outgoings, suitable for operation on 415V, 3

phase, 50Hz Ac Supply with enclosure protection class IP 42 as required

All MCCB (Incoming+Outgoing) in panels shall have aux NO+NC contacts

for remote status (ON/OFF/TRIP)

a) 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V

with selector switch Digital Ammeter (0-250 A) with selector swtich &

CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating

lamps Set of Copper Bus Bar 300A

( Note : All outgoing feeders for pumps should have digital Ammeter

with selector switches, and LED type ON, OFF, trip indicating lamps)

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta

starter suitable for 60 HP pump with overload protection, current

sensing type single phase preventor complete with all acceessories and

internal wiring required for automatic operation, selector switch for

local/remote, auto/manual/OFF operation.

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic

Star/Delta starter with overload protection, current sensing type single

phase preventor complete with all acceessories and internal wiring

required for automatic operation, selector switch for local/remote,

auto/manual/OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising - Automatic/Manual selctor switch

& 3 attempts starting device, timers and relays as required, push

buttons,start/stop in manual mode Indicating lamp for high/ Low Lub.

Oil pressure, High Water Temp and Engine on indication Battery charger

suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V

DC volt meter, and 0- 20 A DC Ammeter All standard relays and

accessories for automatic operation of diesel engine System Controller

Designing, Supply, Installation, Testing and commissioning of system

controller to control operation of main electric fire pump, diesel pump,

Pressurization pump, Terrace pump in sequence as per specification

consisting of relays, timers. Sensors, annunciation window for fault

indication, complete as per specification

Fire panel as above Set 1 245,730.00 245,730.00

Sub-total 245,730.00 -

Sub Head - III (Cables)

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

Supply, Laying, Fixing, Testing and Commissioning of following sizes of

XLPE insulated PVC sheathed armoured Copper / aluminium conductor

cable of 1.1 KV grade on existing cable tray / surface as required.

1 NDSR 4 core x 2.5 Sq mm copper conductor armoured control cable. Metre 60 378.00 22,680.00

2 NDSR 3 core x 35 Sq.mm. Aluminium Armoured Metre 120 435.00 52,200.00

3 Supply and making end termination with brass compression gland and

copper/ aluminium lugs for following size of XLPE insulated and PVC

sheathed aluminium conductor cable of 1.1 KV grade as required.

3.1 NDSR 4 core x 2.5 Sq mm copper conductor armoured control cable. Sets 8 203.00 1,624.00

3.2 9.1.11 3 core x 50 Sq.mm. Aluminium Armoured Sets 16 373.00 5,968.00

SUB HEAD - IV - (PIPING, VALVES AND ACCESSORIES)

1 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

2 Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS:5312 complete with rubber gasket, GI

bolts, nuts,washers etc.as required :

3 Providing, Installation, Testing and Commissioning of Gun Metal /

Bronze Ball Valves with brass body chrome plated of following sizes as

4 Providing, installation, testing and commissioning of stainless steel Y-

strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet

with 3 mm dia holes with stainless steel flange.

5 Providing & fixing double flanged Metallic expansion with M.S. fixed

flanges (PN-1.6) joint (suitable for system test pressure) of standard

length as per manufacturers specs including rubber gaskets, flanges,

nuts, bolts and washers complete as required as per specifications.

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

6 Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

on the wall/ceiling with suitable clamp/support frame and painting with

two or more coats of synthetic enamel paint of required shade

complete as required :

6.1 18.7.10 250 mm dia (wall thickness 6.3 mm) meter 25 6,659.00 166,475.00

6.2 18.7.9 200 mm dia (wall thickness 6.3 mm) meter 20 5,463.00 109,260.00

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 1239/3589 i/c fittings like elbows, tress, flanges,

tapers, nuts nolts, gaskets etc. in ground including welding, excavation

& providing cement concrete blocks as supports, anticorrosive

treatment with coaltar/asphalt tape as per IS 10221, refilling the trench

etc. of following sizes complete as required.

7.1 18.6.1 200 mm. dia (wall thickness = 6.3mm) metre 20 5,561.00 111,220.00

8 18.22 Providing & fixing of pressure switch in M.S. pipe line including

connection etc. as required.

9 18.23 Providing & fixing flow switch in following sizes M.S.pipe including

connection etc as required.

Digitally signed (I)NEELESH

FIRE FIGHTING WORK IIT WORKS BHUBANESWAR

S. Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

No. (DSR-2022 E DSR-2022 Non - DSR DSR-2022 Non- DSR

10 18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling as

10.1 18.18.2 Stainless Steel (Grade 304) Each 5 1,662.00 8,310.00

11 18.16 Supplying and Fixing 63mm dia, 15m long RRL hose pipe with 63mm dia

male and female coupliongs duly bound with GI wire, rivets etc.

conforming to IS 636 (type A) as required:

18.16.2 Stainless steel (Grade 304) Each 10 4,448.00 44,480.00 -

Supplying and fixing orifice plate made out of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange &

landing valve of external and internal hydrants to reduce pressure at the

outlet to the level of 3.5 Kg/cm2 complete as required

13 18.19 Supplying and fixing of fire brigade connection of cast iron body with

gun metal male instantaneous inlet couplings complete with cap and

chain as reqd. for suitable dia MS pipe connection conforming to IS 904

14 18.10 Supplying and fixing Single headed external yard hydrant valve with 1

No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and

cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank

Gunmetal/Stainless Steel cap and chain as required :

18.10.2 Single headed stainless steel Set 4 6,139.00 24,556.00

Digitally signed (I)NEELESH

HVAC and Precision AC works IIT WORKS BHUBANESWAR

NBCC (I) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK - HVAC and Precision AC works in server rooms of SEOCS & SMMME at Argul Campus, IIT Bhubaneswar, Odisha

BILL OF QUANTITIES

S. No Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

(DSR / Non- DSR Non - DSR DSR Non- DSR

1 NDSR Supply of 11 TR (Model - PX41) of Vertiv Make, Floor mounted, frontal discharge,

Air Cooled DX type CRAC units for server room application, equiped with most

advanced industry technology to operate at higher return air temperatures

(Scalable upto 35 Deg C in case of additional load), guaranteeing precise control

of Data Centres and server room . The units shall be selected on the basis of

following parameters:

a) 24 Deg C/50% RH of return air

b) Supply air in between 12-16 Deg C

c) 42 Deg C of Design Ambient temperature

d) Total gross cooling capacity capacity - 40.41 kW

e) Air flow - 10000 CMH

f)Specific Power consumption shall be low as per site design conditions including

compressor, evaporator fans and condensers.

The Indoor Unit shall comprise of step less variable capacity Digital Scroll/Inverter

Compressor, Fibreglass corrosion resistant In-floor EC fans, Evaporator DX

Cooling Coil with hydrophillic coating, Microprocessor controllers, TXV, Driers, G4

Filter, Suction and Discharge piping, Internal power and Control Wiring,

Crankcase heaters, Infra Red Humidifier, HP/LP Cutouts, Power and Control

contactors, water leak detectors and other Electrical accessories.

The Outdoor Condenser unit shall comprise of Condenser fans & motor,

Condenser cooling coil (Copper coil with aluminium fins), Fan speed controller,

Isolator switch. The condensing temperature of matching air cooled condenser

noty to exceed 54 Deg C at design conditions.

The Unit shall bve suitable for operation on 415V, 50 Hz, 3 Phase, 4 wire AC

supply. Each unit should be having individual display panel, which shall display

date, time, actual & set values, operating conditions, signal faults, collective

faults, limiting values and PAC wellness alarm/service alarm to reduce the

downtime and unit memory shall hold the 400 most recent events with ID

number, time and date stamp for each event.

Digitally signed by NEELESH

1 of 6 SAHU NBCC (I) LTD

HVAC and Precision AC works IIT WORKS BHUBANESWAR

S. No Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

(DSR / Non- DSR Non - DSR DSR Non- DSR

The dimension of the unit shall not be more than 1200mm x 890mm x 1970mm

2 NDSR Installation and commissioning of 3 Nos. of machines with ICOM, Nitrogen

Pressure testing, Vaccuming, Gas charging considering IDU to ODU distance of

15mtr including supply & installation of low side material as mentioned below:

Refrigerant Copper pipe - Gas line (45 mtr)

Refrigerant Copper pipe - Liquid line (45 mtr)

Hot gas pipe insulation (45 mtr)

Liquid pipe insulation (45 mtr)

40 mm Drain pipe line (30 mtr)

25 mm Humidifier pipe line(30 mtr)

Indoor unit stand (3 nos.)

Outddor unit stand

Cable tray 2" (20 mtr)

Refrigerant R-410A (70 kg)

Control cable between IDU & ODU (50 mtr)

Note* - The quantity considered above aprproximate quantities

3 NDSR VRV/VRF UNITS

Supply, Installation, testing & commissioning of Variable refrigerant volume/flow

modular type air-conditioning system suitable to operate from 415±10% volt, 50

Hz,3 phase AC power supply for cooling by using inverter driven capa`city control

compressors (Hermetically sealed scroll type) complete with individual controller

and fittings with necessary wiring, connection, including suitable isolator for

each selected module, termination etc. M.S. frame duly painted to locate

Outdoor Unit etc. as per quantity given below including full charging of R-410A

refrigerant gas complete as per specifications.Suitable capacity of 4Pole isolator

selected for each module within MS enclosure complete with all electrical

4 NDSR Indoor VRV Units (Nominal Capacity) - Ceiling Mounted ductable high static

Digitally signed by NEELESH

2 of 6 SAHU NBCC (I) LTD

HVAC and Precision AC works IIT WORKS BHUBANESWAR

S. No Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

(DSR / Non- DSR Non - DSR DSR Non- DSR

Supply, Installation, testing & commissioning of Ceiling Mounted ductable high

static type Unit of following capacity suitable to operate from 230±10% volt, 50

HZ, 1 phase power supply with canvas Connection, corded remote control,

fittings & required cable to connect indoor unit to socket.Refrigerant Pipe size

and gas quantity should suit to the copper pipe length at actual.The capacity

guarantee should be ensured by the vendor.

Refrigerant Piping -VRF System

5 Supply & Installation of interconnecting following sizes of one end

expanded refrigerant copper pipe work of following outer diameter,

insulated with 19/13 mm thick closed cell electrometric EPDM/nitrile

rubber tubular insulation between each set of indoor & outdoor units with

outer mechanical protection of alluminum cladding for all exposed pipes as

per specification. All piping inside the room shall be propelrly

fixed/supported with suitable size of clamp/ M.S. hanger and all external piping

shall run in M.S. painted cable tray(Price Extra) etc. as reqd. -

5.1 NDSR 41.3 mm dia with 19mm thick EPDM/nitrile rubber insulation Mtrs. 5 3084.00 15,420.00

5.2 NDSR 38.0 mm dia with 19mm thick EPDM/nitrile rubber insulation Mtrs. 5 2673.00 13,365.00

5.3 NDSR 34.9 mm dia with 19mm thick EPDM/nitrile rubber insulation Mtrs. 5 2536.00 12,680.00

5.4 NDSR 28.6 mm dia with 19mm thick EPDM/nitrile rubber insulation Mtrs. 5 2124.00 10,620.00

5.5 NDSR 22.2 mm dia with 19mm thick EPDM/nitrile rubber insulation Mtrs. 10 1713.00 17,130.00

5.6 NDSR 19.1 mm dia with 13mm thick EPDM/nitrile rubber insulation Mtrs. 10 1165.00 11,650.00

5.7 NDSR 15.9 mm dia with 13mm thick EPDM/nitrile rubber insulation Mtrs. 10 959.00 9,590.00

5.8 NDSR 12.7 mm dia with 13mm thick EPDM/ nitrile rubber insulation Mtrs. 10 809.00 8,090.00

5.9 NDSR 9.5 mm dia with 13mm thick EPDM/nitrile rubber insulation Mtrs. 10 699.00 6,990.00

5.10 NDSR 6.4 mm dia with 13mm thick EPDM/nitrile rubber insulation Mtrs. 10 617.00 6,170.00

Digitally signed by NEELESH

3 of 6 SAHU NBCC (I) LTD

HVAC and Precision AC works IIT WORKS BHUBANESWAR

S. No Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

(DSR / Non- DSR Non - DSR DSR Non- DSR

6 Providing & fixing of PVC Pipe complete with fittings, supports as per

specifications and duly insulated with 6/9 mm thickness of closed cell

nitrile rubber as per direction of Engineer-in-charge & specifications

enclosed as reqd.

6.1 NDSR 50 mm dia with 9 mm thick insulation Mtrs. 5.00 754.00 3,770.00

6.2 NDSR 40 mm dia with 9 mm thick insulation Mtrs. 5.00 576.00 2,880.00

6.3 NDSR 32 mm dia with 6 mm thick insulation Mtrs. 15.00 302.00 4,530.00

6.4 NDSR 25 mm dia with 6 mm thick insulation Mtrs. 10.00 247.00 2,470.00

6.5 NDSR 20 mm dia with 6 mm thick insulation Mtrs. 10.00 219.00 2,190.00

7 Providing & fixing of control wiring/power cabling with following sizes of

copper conductor armoured cable between indoor and outdoor units directly

on surface of wall/ existing channel i/c making connection etc. as reqd.

8 16.12.1 Supply, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/round ducting complete with neoprene

rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as

per approved drawings and specifications of following sheet thickness

complete as required.

9 16.12.2 Supply, installation, balancing and commissioning of fabricated at site GSS

sheet metal rectangular/round ducting complete with neoprene rubber

gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per

approved drawings and specifications of following sheet thickness complete as

Digitally signed by NEELESH

4 of 6 SAHU NBCC (I) LTD

HVAC and Precision AC works IIT WORKS BHUBANESWAR

S. No Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

(DSR / Non- DSR Non - DSR DSR Non- DSR

10 16.23 Supplying and fixing of following thickness duly laminated aluminum foil

of mat finish closed cell Nitrile rubber (Class “O”) insulation on duct

after applying suitable adhesive for Nitrile rubber. The joints shall be sealed

with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape

insulation complete as per specifications and as required.

11 16.21 Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm

thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm

GI section of 1.25 mm thick, at 600 mm centre to centre covered with

Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet

fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins,

CPRX compound etc. complete as required and as per specifications.

12 Supplying, Fabricating and installation following size of perforated G.I. cable

trays including horizontal and vertical bends, reducers, tees, cross members

and other accessories as required and duly suspended from the ceiling with

M.S. suspenders and including painting with powder coating etc. as required:

12.1 MR 150 mm. Width x 50mm. Depth x 1.6mm. Thickness. Mtrs. 50 1,028.00 51,400.00

12.2 MR 300 mm. Width x 50mm. Depth x 1.6mm. Thickness. Mtrs. 50 1,645.00 82,250.00

13 MR Supply, Installation, testing and commissioning of necessary fittings, Y- joints

and headers etc. Sets 8 2,741.00 21,928.00

14 16.17 Supplying, fixing testing commissioning of supply air diffusers of powder coated

aluminium with aluminium volume control dampers with anti smudge ring &

removable core. SQM. 3 12,184.00 36,552.00

15 16.18 Supplying, fixing testing commissioning of Return air diffusers of powder coated

aluminium without volume control dampers with anti smudge ring & removable

Digitally signed by NEELESH

5 of 6 SAHU NBCC (I) LTD

HVAC and Precision AC works IIT WORKS BHUBANESWAR

S. No Item No. Item Description Unit Qty. Rate (Rs.) Amount (Rs.)

(DSR / Non- DSR Non - DSR DSR Non- DSR

16 MR Supply, Installation and Testing of collar damper of galvanised steel sheet,

provided with suitable links, levers and quadrants for manual control of

volume of air flow and for proper balancing of air distribution as per approved

shop floor drawings and specifications. SQM. 5 9,320.00 46,600.00

Digitally signed by NEELESH

6 of 6 SAHU NBCC (I) LTD

AUDIO VIDEO SYSTEM IIT WORKS BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK - Audio Video Systems for LTC-02 at Argul Campus, IIT Bhubaneswar, Odisha

BILL OF QUANTITIES

Item No. Rate (Rs.) Amount (Rs.)

S. No. (DSR-2022 / Item Description Unit Qty.

Non-DSR) DSR 2022 Non - DSR DSR 2022 Non- DSR

Supply, Installation, Testing & Commissioning of Ultra-short Throw Laser Projector - Full

1 NDSR HD 1920x1080 resolution, 5000 Lumens or higher, HDMI Inputs along with adjustable wall No. 20.00 269,242.00 5,384,840.00

Supply, Installation, Testing & Commissioning of fixed projector stand for 5000 Lumens

Supply, Installation, Testing & Commissioning of : 150" (AR 16:10) Motorised Projection

Screen Matte white, Projection Surface, builtin motor system with IR/RF receiver, high

gain & viewing angle , Noise less Up/Down operation, Iamge Size: Min. 130' Diagonal etc.

Supply, Installation, Testing & Commissioning of : Magnetic White Board, 8'W x 4'H size,

Cermic Steel with all required accessories etc. all complete.

Supply, Installation, Testing & Commissioning of : Magnetic White Board, 10'W x 4'H size,

Cermic Steel with all required accessories etc. all complete.

Supply, Installation, Testing & Commissioning of : 1 Meter Audio Grade cable having

3.5mm Audio Jack on one side and Loose wire connectivity on the other end.

Supply, Installation, Testing & Commissioning of 2 Meter Audio cable having XLR Female

connector on one side and loose cable on the other end.

Supply, Installation, Testing & Commissioning of Connectors: Specialist all types

8 NDSR Audio/Video cable connectors such as for HDMI, VGA, Video Speaker, Set etc. all Set 16 19,424.00 310,784.00

complete. for 1 Class room

9 NDSR Supply, Installation, Testing & Commissioning of HDMI Cables Meter 320 651.00 208,320.00

Digitally signed by NEELESH

1 of 6 SAHU NBCC (I) LTD.

AUDIO VIDEO SYSTEM IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. No. (DSR-2022 / Item Description Unit Qty.

Non-DSR) DSR 2022 Non - DSR DSR 2022 Non- DSR

10 NDSR Supply and laying in existing conduit : 2C X 1.5 Sq.mm. Audio/ Speaker cable. Meter 2,190 84.00 183,960.00

Supply, Installation, Testing & Commissioning of Power Amplifeir with mixer: Rated output

320W , 3 Microphone input, 2 Aux Input, min 1 Microphone support phantom power,

impedence 4 / 8 ohm &100 / 70 V, Frequency Response 50 - 20,000 Hz or better with rack

mounting accessories etc. all complete.

Supply, Installation, Testing & Commissioning of Gooseneck Microphone: 420mm, Slim,

12 NDSR high-quality, Cardioid Condenser Microphone Design, Rated Impedance 120 Ω, balanced, No. 16.00 19,428.00 310,848.00

Frequency Response 70 Hz - 20 kHz etc. all complete.

Supply, Installation, Testing & Commissioning of Wireless Lapel Microphone: Frequency

Range 576 - 865 MHz or Better, UHF, Frequency modulation, Signal to Noise Ratio 104 dB

or more, T.H.D: < 1% or better, Microphone Electret condenser,Frequency Response 100

Hz - 15 kHz etc. Having 60 simultaneous channels

Supply, Installation, Testing & Commissioning of Ceiling Speaker: Bass reflex type, Rated

power 30W, Impedence 8 ohm, 100 / 70 V, SPL 90dB, Frequency Response 70 Hz - 20 kHz,

6" Cone type, with all mounting accessories etc. all

Supply, Installation, Testing & Commissioning of Retractable Integrated Automated

Wooden Multimedia Lectern with wired mic connectivity, provision for goose neck mic,

made of metal , powder coated finish having tilt adjustable 21.5" tocuh screen with tocuh

15 NDSR pen, table top with reading lamps, Large reading surface, having inbuilt multiformat No. 16.00 269,934.00 4,318,944.00

HDMI/VGA/Audio switcher 4 In X 2 Video Out X 1 Audio Out with necessary cabelling upto

I/O ports and having space for placement of AV equipments and space for CPU and having

locking arrangement as per approved sample.

Digitally signed by NEELESH

2 of 6 SAHU NBCC (I) LTD.

AUDIO VIDEO SYSTEM IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. No. (DSR-2022 / Item Description Unit Qty.

Non-DSR) DSR 2022 Non - DSR DSR 2022 Non- DSR

Supply installation testing & commissioning of CPU without moniter (Display) having

following specifications :

1. Intel Core i7 10700 or higher 10th Generation or Higher,

2. Intel chipset : H/Q/B/Q/Z series or better compatible with CPU,

3. Integrated onboard graphics,

4. Hard Disk : 1TB 7200 RPM SATA + 256 GB SSD,

5. Memory : 8GB DDR4-2666MHz or Higher and upgradable upto 32GB or higher,

6. Minium 2 DIMM Slots,

7. OEM Installed : Windows 10/11 or Higher,

8. Cabinet : Tower / Small / Micro Form Factor

16 NDSR 9. Network Connectivity : 10/100/1000 GbE Ethernet Port. No. 16.00 91,362.00 1,461,792.00

10. Wireless : Intel Wifi 5 or 6 and bluetooth

11. Expension Slots : Minimum 2

12. USB Ports : 4xUSB2.0 and 4xUSB3.0

13. Display Port : 1 HDMI Full HD

14. Keyboard : Standard wired QWERTY Keyboard

15. Mouse : Optical wired mouse

16. Certification : BIS, BEE, EPR, RoHS or any other relevant Indian certificates.

17. Power Supply : Min 85% power efficiency and Power Supply with SMPS surge

18. On Site OEM Warranty : 5 Years

Supply, Installation, Testing & Commissioning of Projection System: Wireless Presentation

Solution, Enables wireless presentation of HD content using laptops, tablets, and

smartphones, Compatible with Windows, OS X, Apple iOS, and Android, Displays up to four

17 NDSR presentation sources at once in Quad View, Supports up to 32 or more simultaneous No. 4.00 101,682.00 406,728.00

presenter connections, Supports display resolutions up to 4K UHD Full HD 1080p and

UXGA/WUXGA, Provides HDMI, VGA / mini Display Port, and analog audio/ S/PDIF outputs

etc. all complete

Supply, Installation, Testing & Commissioning of Projection System: Wireless operating

18 NDSR distance: Approx 10m, Wireless technology: 2.4GHｚwireless technology, Interface: USB No. 16.00 15,227.00 243,632.00

etc. all complete.

Digitally signed by NEELESH

3 of 6 SAHU NBCC (I) LTD.

AUDIO VIDEO SYSTEM IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. No. (DSR-2022 / Item Description Unit Qty.

Non-DSR) DSR 2022 Non - DSR DSR 2022 Non- DSR

Supply, Installation, Testing & Commissioning of Multiformat Presentation Switcher: 1

HDMI, 1 HD-15 (RGB), 1DVI / HDMI, 1 Display Port, 1 HD Base T Output, Audio Embedding

& De-embedding, Built in processor with IR, RS232, GPIO ports, supports HDMI 1.4, DVI,

VGA, Display Port 1.1 signals,supports Up to 4K / UHD, supports RGB 4:4:4, YCbCr 4:2:0,

HDCP Complaint, CEC, EDID transparent, Extends HD Base T single Catx Cable up to 100m

etc. all complete.

Supply, Installation, Testing & Commissioning of Multiformat Transmitter: 1 HDMI, 1 VGA,

1 Audio, HD Base T output, Supports HDMI 1.4, DVI, VGA Signals, Audio Embedding,

20 NDSR supports RGB 4:4:4, YCbCr 4:2:0, HDCP Complaint, CEC, EDID transparent, Extends HD No. 1.00 157,655.00 157,655.00

Base T over signle Catx cable upto 100m or more, Support upto 4K / UHD Resolution etc.

Supply, Installation, Testing & Commissioning of Multiformat Matrix Switcher: 2 HD Base

T, 4 HDMI, 4 Audio Input, 2 HD Base T & 2 HDMI Out , Audio Output , Audio Embedding &

21 NDSR De-Embedding at Input and output, Extends HD Base T upto 100 m or more, Zero frame No. 1.00 475,153.00 475,153.00

delay, Resolution Support upto 4K / UHD, RS232 Injection support at HD Base T input &

output, PoE supports at HD Base T input and output end etc. all complete.

Supply, Installation, Testing & Commissioning of HDMI Reciver: HDMI Revicer over single

22 NDSR Cat Cable, supports HD Base T, HD Base T input, HDMI Output, support upto 4K /UHD (RGB No. 1.00 50,714.00 50,714.00

4:4:4, YCbCr 4:2:0), Bidectional RS232, IR, Extend up to 100m etc. all complete.

Supply, Installation, Testing & Commissioning of Equipment Rack: Rack Structure 12U with

power strips and all required accessories etc. all complete

SITC of 86" Interactive White Board with Brightness(Typ.) (Make - SONY/Christie): 410

24 NDSR cd/m², Touch Point: Max. 20 points , Interface: HDMI (3), DP, DVI, RGB, RS232C, RJ45, USB Nos 6.00 859,347.00 5,156,082.00

(2), OPS USB, Touch USB (2), Wi-fi Built-in

Supplying and fixing following modular switch / socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

26 NDSR Socket for RJ 45 Jack for Cat - 6A Cable Each 160.00 558.00 89,280.00

Digitally signed by NEELESH

4 of 6 SAHU NBCC (I) LTD.

AUDIO VIDEO SYSTEM IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. No. (DSR-2022 / Item Description Unit Qty.

Non-DSR) DSR 2022 Non - DSR DSR 2022 Non- DSR

Supplying & drawing of 4-pair Unshielded twisted pair with a cross filler (+), meeting

Category 6A standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall

be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-2 & IEC

60754-1 respectively.

Supplying & Fixing of UTP Jack Panel, loaded with 24 nos UTP ports for Non-PCB based IO

Jacks (RJ45, TIA-568C Category-6A, Shall have integrated bonding bar or other mechanism

for grounding, Shall be loaded with individually replaceable 24 nos. Category-6A

28 NDSR certification by Jacks complying with TIA-568.C.2 , Shall be having a 6 port module No. 40.00 9,122.00 364,880.00

construction for better cable dressing at the rear, the jacks shall have RJ-45 type

connector with bend limiting and strain relief boot for securing IDC contacts from external

forces and for maintaining the bend radius of the cable complete in all respect.

Supplying & Fixing of Category 6A, UTP patch cords shall be constructed of 24-27 AWG

unshielded twisted pair stranded copper cable with an enhanced performance modular

plug at each end. Patch cord cable shall be offered in multiple colored UTP cable for design

flexibility with a clear strain relief boot on each modular plug. All patch cords shall be

compatible with both T568A and T568B wiring schemes. UTP Cable will be 1.0 mtr.

complete in all respect. Jacket - LSZH

Supplying & Fixing of Fiber Optic LC style fully loaded Patch Panel (FOPP), 19" Rack Mount

,Shall have all accessories including coupler plates pre loaded with 12 Nos of LC couplers

(OM3) with all accessories complete in all respect. Pigtails Should Complie to ITU-G657.B-

Bend insestive fiber.

Supplying & Fixing of Fiber Optic LC style fully loaded Patch Panel (FOPP), 19" Rack Mount

,Shall have all accessories including coupler plates pre loaded with 24 Nos of LC couplers

(OM3) with all accessories complete in all respect. Pigtails Should Complie to ITU-G657.B-

Bend insestive fiber

Supplying & Fixing of Fiber Optic Patch Cable (LC-LC), 2 Mtrs. Long, ISO/IEC-11801-OM3

50μ Duplex, LSZH,All patch cords shall conform to EIA/TIA-568C.3 and ISO/IEC-11801,Shall

32 NDSR be Duplex Multi Mode Fiber Optic Patch Cords OM3 50μ,Shall support network line Mtr 138.00 2,326.00 320,988.00

speeds up to 10 Gbps.Shall have LC-LC Connector connectors at the ends complete in all

Digitally signed by NEELESH

5 of 6 SAHU NBCC (I) LTD.

AUDIO VIDEO SYSTEM IIT WORKS BHUBANESWAR

Item No. Rate (Rs.) Amount (Rs.)

S. No. (DSR-2022 / Item Description Unit Qty.

Non-DSR) DSR 2022 Non - DSR DSR 2022 Non- DSR

Supply & Fixing of OM3 50/125μ Type Pigtails of ISO/IEC-11801-OM3 Pigtails with LC Type

Connectors,pigtails for terminating fibers on the FOPP complete in all respect.

Supplying, Installation, Testing & Commissioning of 50μ, 6-core Multi mode OM3 metallic

armored Fiber cable as per ISO/IEC-11801, Shall be able to meet Gigabit & 10 Gigabit

Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-

X) & IEEE 802.3ae (10G Base-X) Tensile load should be 4000 Newton or higher and crush

resistance should be 4000 Newton or higher ,The attenuation @ 850 nm should be ≤ 2.7

(Max) db/Km and @ 1300 nm should be ≤ 0.7 (Max) dB/Km, the fiber construction can be

unitube or multitube, but tensile and crush resistance parameters should be matched, the

jacket shall be FRLSZH complete in all respect.

Supplying, Installation, Testing & Commissioning of 50μ, 6-core Single Mode OM3

metallic armored Fiber cable as per ISO/IEC-11801, The fiber construction can be unitube

or multitube, but tensile and crush resistance parameters should be matched, the jacket

shall be FRLSZH complete in all respect.

Supplying and fixing of following sizes of steel conduit along with accessories in surface /

36 1.20 recess including painting in case of surface conduit, or cutting the wall and making good -

the same in case of recessed conduit as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Digitally signed by NEELESH

6 of 6 SAHU NBCC (I) LTD.

BMS IIT BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK - BUILDING MANAGEMENT SYSTEM (BMS) WORK FOR LTC-02 OF IIT

S. No. Description DSR Non DSR

Amount (Rs.) Amount (Rs.)

1 Sub Head A : Server & Software - 1,754,290.00

2 Sub Head B : BMS Hardware. - 5,558,281.00

3 Sub Head C : Sensors - 1,989,060.00

4 Sub Head D : Electrical Works - 1,721,260.00

Grand Total (DSR +Non DSR) 11,022,891.000

Grand Total (DSR +Non DSR) 11,022,891.000

BUILDING MANAGEMENT SYSTEM (BMS) IIT BHUBANESWAR

NBCC (INDIA) LIMITED

(A GOVERNMENT OF INDIA ENTERPRISE)

NAME OF WORK - BUILDING MANAGEMENT SYSTEM (BMS) WORK FOR AUDITORIUM & SAC OF IIT BHUBANESWER

BILL OF QUANTITIES

S. No. Item No. (DSR Unit Qty. Rate (Rs.) Amount (Rs.)

/ Non-DSR) Item Description

DSR Non - DSR DSR Non- DSR

A Sub Head A : Server & Software

BMS Server : Supply, Installation, Testing & Commissioning of Workstation having i7

Processor, 1 TB HDD, 8 GB RAM 10/100/1000MBPS Network card with built in wifi

1 NDSR and bluetooth along with 24" LED moniter (Resolution 1920 x 1080), wired optical Set 1.00 175,852.0 175,852.00

mouse and QWERTY keyboard, complete in all respect with Windows 11 professional

and microsoft office professional

2 NDSR Supply and Installation of A-4 size black & white printer. Set 1.00 21,486.0 21,486.00

SITC of the following window based graphical software for IBMS system with 5Nos

Client for Operator workstation. The following software packages shall have below

minimum features and compliances.

b) Native 64 Bit System , BTL,UL,EN Certified System, BACnet Profile B-AWS

(Advanced workstation) as per the BTL Listing.

c) Multi-Monitor Support-( Min 4 Nos), Multi-language support.

d) Certified OPC DA Server by OPC Foundation.

e) HTML5 based Web-Server software shall permit use of Standard Web-Browsers

such as Microsoft Edge, Google Chrome, Mozilla Firefox, etc.

f) The Software shall comply to international standards and strive to deliver products

that meet security standards such as ISA/IEC 62443, UL2900, ISO/IEC 27001,

ISO/IEC62443 and OWASP.

g) Cybersecurity SL2, Seamless integration of Security certificates within customer IT

infrastructure, Microsoft’s active directory-based authentication, LDAP integration,

Use of network infrastructure that supports physical network or VLAN segmentation,

End-to-end encryption from client to server, End-to-end encryption between servers,

Certificate-based data exchange, Encrypted backups.

j) Ability to provide data to other systems thru OPC DA Server and / Or Rest web

services interface

Supply, installation, testing and commissioning of hand held portable operator

terminals (POT) minimum 7 inch. TFT display with capacitive touch screen type, shall

be able to view graphs , alarms , parameters etc. POT shall have integrated web

server and a BACnet/ IP web interface to connect a HTML5 browser to a device on the

network. POT With all required connectors etc as per technical specification etc.

Integration of New BMS system with existing BMS server/Software including all

5 NDSR programming etc in all respect up to satisfaction of consultant/Client. Job 2.00 104,586.0 209,172.00

TOTAL FOR SUB HEAD A : 0.00 1,754,290.00

B Sub Head B : BMS Hardware.

BMS PANEL 8 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

BUILDING MANAGEMENT SYSTEM (BMS) IIT BHUBANESWAR

S. No. Item No. (DSR Unit Qty. Rate (Rs.) Amount (Rs.)

/ Non-DSR) Item Description

DSR Non - DSR DSR Non- DSR

BMS PANEL 9 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

BMS PANEL 10 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

BMS PANEL 11 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

BMS PANEL 12 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

BUILDING MANAGEMENT SYSTEM (BMS) IIT BHUBANESWAR

S. No. Item No. (DSR Unit Qty. Rate (Rs.) Amount (Rs.)

/ Non-DSR) Item Description

DSR Non - DSR DSR Non- DSR

BMS PANEL 13 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

BMS PANEL 14 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

BMS PANEL 15 as per I/O Summary: Supply, Installation, Testing and Commissioning

of DDC Enclosures with complete accessories and Wiring. All DO shall have 5A Relay

including Programmable and Application specific - 32 bit, UL Listed BACnet (BTL

certified) Real-Time controllers with programmable memory, field mounted,

configured as per given Data Point summary for respective building services, and as

per given distributions. The controllers must be multi-protocol supporting open

industry standards, including BACnet IP. The controllers must be stand-alone Direct

Digital Controllers (DDCs) / Automation Server Controllers, with I/O modules. DDCs

must have minimum 2 built-in Ethernet ports. DDC Controller shall be equipped with

a battery-free real-time clock with backup for min 7 days using super capacitor. The

controller shall be freely programmable and have System functions (alarming,

scheduling, trending, access protection with individually definable user profiles and

categories) Note: Comissioning tool should not be dependent on any license / dongle

and no extra cost should be charged

TOTAL FOR SUB HEAD B : 0.00 5,558,281.00

C Sub Head C : Sensors

Note : The DDC shall support sensor with DC 0...20 mA or 4...20 mA, DC 0 ... 10 V,

Supply, Installation, Testing & Commissioning of Immersion type temperature

1 NDSR sensors for measuring Chilled water water supply and return temperature (Range 32- No. 4.00 8,986.0 35,944.00

Supply, Installation, Testing & Commissioning of DP Switch water across the pumps

for measuring pumps status

Supply, Installation, Testing & Commissioning of Water Pressure Transmitter/sensor

Complete with all accessories as required.

Supply, Installation, Testing & Commissioning of Ultrasonic Water Flow meter.

BUILDING MANAGEMENT SYSTEM (BMS) IIT BHUBANESWAR

S. No. Item No. (DSR Unit Qty. Rate (Rs.) Amount (Rs.)

/ Non-DSR) Item Description

DSR Non - DSR DSR Non- DSR

Supply, Installation, Testing & Commissioning of Outside Temperature+ Rh Sensors

Supply, Installation, Testing & Commissioning of Differential Pressure switch across

6 NDSR the Air Handling Units/Heat Recovery Wheel for indicating the Fan & Filter Status No. 64.00 6,245.0 399,680.00

Supply, Installation, Testing & Commissioning of Duct type temperature sensors for

7 NDSR measuring Return air temperature at the Air Handling Units(Range 45-150 deg.F) No. 32.00 5,995.0 191,840.00

Supply, Installation, Testing & Commissioning of Single Level Switch for measuring

level in tanks/ cooling towers

9 NDSR Supply, Installation, Testing & Commissioning of Current Relay No. 58.00 6,992.0 405,536.00

10 NDSR Supply, Installation, Testing & Commissioning of water flow switch No. 2.00 21,444.0 42,888.00

Supply, Installation, Testing & Commissioning of Outside CO2 Sensor for measuring

CO2 range 0..2000ppm.

TOTAL FOR SUB HEAD C : 0.00 1,989,060.00

D Sub Head D : Electrical Works

Supply and laying of 2C X 1.5 Sq.mm. Sheilded signal cable in existing

Conduit/Raceway / Cable Tray

Supply and laying of 4C X 1.5 Sq.mm. Sheilded signal cable in existing

Conduit/Raceway / Cable Tray

Supply and laying 2C X 1.5 Sq.mm. unarmoured multistrand copper cable in existing

conduit/racway/cable tray

Supply and laying 3C X 1.5 Sq.mm. unarmoured multistrand copper cable in existing

conduit/racway/cable tray

Supply and laying 4C X 1.5 Sq.mm. unarmoured multistrand copper cable in existing

conduit/racway/cable tray

Supply and Laying of 6C X 1.5 Sq.mm. unarmoured multistrand copper cable in

existing conduit/racway/cable tray

Supply and Laying of 12C X 1.5 Sq.mm. unarmoured multistrand copper cable in

existing conduit/racway/cable tray

Supply and Installation of MS powder coated cable tray including accessories like

hanger rod, fasterner, channel.

Making End Termination with PVC Gland and pin/ring etc. (as applicable) thimble for

the below mentioned cable sizes

a. NDSR 2C X 1.5 Sheilded Signal Cable No. 80.00 198.0 15,840.00

b. NDSR 4C X 1.5 Sheilded Signal Cable No. 40.00 203.0 8,120.00

c. NDSR 2C X 1.5 Sq. mm. Control Cable No. 10.00 198.0 1,980.00

d. NDSR 3C X 1.5 Sq. mm. Control Cable No. 10.00 201.0 2,010.00

e. NDSR 4C X 1.5 Sq. mm. Control Cable No. 10.00 203.0 2,030.00

f. NDSR 6C X 1.5 Sq. mm. Control Cable No. 30.00 216.0 6,480.00

g. NDSR 12C X 1.5 Sq. mm. Control Cable No. 75.00 232.0 17,400.00

10 NDSR Supply and installation of below size GI flexible Pipe

TOTAL FOR SUB HEAD D : 0.00 1,721,260.00