8888/E8

Amount

Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.

Dismentalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed

Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed

Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed and directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed.

All as item No. 07 mentioned here-in-before but exc 1.5 Sqm and nexc 4.0 Sqm each.

Taking down of shutters of any description nexc 1.0 Sqm each complete all as specified and directed

Taking down of shutters of any description exc 1.0 Sqm and nexc 2.0 Sqm each complete all as specified and directed.

Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in framed Work, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed.

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

Taking up or down steel tubing 15mm dia and connection complete all as specified and directed

All as per item No. 16.00 mentioned here-in-before but 20mm dia bore.

M&L fly ash bricks pulverizes using class designtion 75 (kgf/cm2) bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed.

M&L half brick thick brick work with class designtion 75 (kgf/cm2) fly ash bricks pulverizes straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed

M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier "Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd" or "Hind Styrene BR of Hindcon Chemical Ltd" or equivalent of M/s Pidilite Industries /Icannano @ 7 Litre per bag of cement complete finished even and smooth without using extra cement complete all as specified and as per manufacturer's specification.

M&L rendering 10mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed

M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement complete all as specified and directed

Supply only liquid water proffing compound as required

Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth.

S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.

All as per item No. 28.00 mentioned here-in-before but double socketed complete all as specified and directed.

S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed

S&F in repair PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed.

M&L for diameter of outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repairs 125mm size PTMT Grating Doom with waste hole(Min weight 40 grms) , complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips quality conforming to fe 410-S.

Formwork to soffits of suspended slabs such as roof slabs,floor,slabs,landings and similar work not exceeding 200mm thick rough finished surfaces without using extra cement(Horizontal or slooping )

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, crumple joints, ridge cover, etc fixed with self tapping screws etc; complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screw complete all as specified and directed.

M&L for Non Asbestos fiber cement Corrugated /Semi-Corrugated Sheets 6.0mm thick provides high impact resistance, sound and thermal insulation as in Roof Covering fixed with L–type or J–type Cranked Hook Bolts with Washers, etc. and fixed, complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in of floor, finish even and fair complete all as specified.

M&L Light shade Vitrified Ceramic Tiles 8mm- 10 mm thick (square/ rectangular) , Polished, area of each tile not exc 0.36 sqm as in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed.

M&L Light shade Vitrified Ceramic Tiles 8mm- 10 mm thick (square/ rectangular) , Polished, area of each tile not exc 0.36 sqm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item No. 42.00 mentioned here-in-before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

All as item No. 44 mentioned here-in-before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed

M&L RCC (Nominal Mix) 1:1.5:3 type A-1 (Using 20mm graded stone aggreagate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like similar works complete all as specified and directed.

M&L for Pressed steel frames 1.25mm thick for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate

M&L for Pressed steel frames 1.25mm thickness for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs,hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate

M&L for PCC 1:3:6 type C-1 using 20mm graded stone agg as in bed blocks/hold fast complete all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed

S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window (Area of each window not exceeding 2.00 sqm) Three track made of extrueded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52 mm), sliding sash (42mm x 67mm). Sliding mesh sash (42mmx57mm) Sliding interlock (one vertical length in each shutters) (45.5mmx28mm), Glazing bead (24.5mmx16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gastket, 1.2 (+-0.2mm) thick galvanised steel fr Frame (30mmx18mm) 2 Nos, sliding sash (30mmx18mm) , sliding mesh sash (36mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mmx 100mm long fasteners, hardware (Touch Lock of Zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and required accessoreis Complete all as specified and as directed. (Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

M&L 1.50mm thick powder coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles , anodised aluminium snap beading screws etc.including Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and required accessoreis and tinted glass with sheet glass 4.80mm thick , pin head type and glazing Complete all as specified and as directed. Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window.

S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600X450mm complete with following specification . (a) Alu frames of size 45x45x1.2mm (b) Rail & Stile 45x45x1.2mm thick (c) 4.80mm thick frosted sheet glass Note :- All ventilators/louvers member including fitting & fixture shall be deem to included quoted rate. Only measure opening size of ventilators/louvers

Supply and fixing of tinted glass with sheet glass 4.80mm thick , pin head type and glazing in squares exc 0.5 sq. M in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane.

S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified.

S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed

S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.

S&F 20mm dia brass chromium plated tubular curtain rod with Chromium plated Bracket both side stops, rollers etc complete all as specified and as directed.

M&L 18/19 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed.

S&F (piano) mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished as in repair complete all as specified and as directed.

S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed.

S & F work in repair for ABS body chrome plated shower rose 125mm size wih shower arm 240mm long round shape with flage including fixing to steel pipe or union including fixing to steel pipe or union complete all as specified and directed

Supply and fix in repair stainless steel kitchen sink without drainage board of overall size 510mm x 430mm x203mm of bowl size 430mm x 380mm x203mm, made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 Cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed.

S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. Make : Essco (MQT-526KN) or equivalent from Hindware/Prayag

S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed.

S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed.

S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed.

S & F in repair CP sink cock with swinging spout (wallmounted model) with Wall Flange screwed for CPVC pipe complete all as specified and colour as directed.

S & F in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed.

S & F in repair for 15mm bore brass chromium plated Sink Mixer, Connecting Legs & Wall Flanges complete all as specified and directed.

S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed.

Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, black colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed.

S&F in repair vitreous china squatting pan orrissa pattern size 580x440mm white with intregal foot rest including connection to trap, and flusing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified.

S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed.

S&F in repair PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed

S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismental of old water tank and removing from site complete all as specified & directed.

S&F triple layer PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismental of old water tank and removing from site complete all as specified & directed.

S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60,cm long between flanges as in repair complete all as specified and directed.

S&F stainless steel utencil plate rack (size 24'' x 30'' x 10'') using 0.8mm thick sheet with all fittings accessories complete as directed.

S&F PVC bathroom cabinet (white) of size 500 x 400 x 100 mm (approx) with one single shutter and built in mirror in front of shutter, fixed on walls with wooden plugs and and chromium plated brass screw and cup washe as in repair complete all as specified & directed.

S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide, 60 cm long with chromium plated brackets guard and railing fixed in position with necessary fixing arrangement as in repair complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old surfaces of wood or wood based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified.

M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified.

M&L for preparation of old surfaces of steel or steel based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified.

M&L Preparing old surfaces of internal walls and applying one coats of white wash, complete all specified and directed.

M&L Preparing old decorated Plaster Surfaces of ceiling and applying One Coat of White Wash (any colour/ tint) complete all as specified and as directed.

M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed.

M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer including two coat of white cement based putty (approx 2mm thick) including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L preparing old decorated surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L preparing old decorated ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed.

M&L preparing old decorated surfaces and Finishing walls with one coat of Acrylic Smooth exterior paint of required shade complete all as specified & directed.

Preparing old decorative Surfaces of walls and applying one Coat of cement base paint complete all as specified and as directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L Steel Work in Tubular /hollow section as trusses, purlin , rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed.

S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290 Gde-E165) complete all as specified and directed.

M and L 20mm thick granite of any type tiles machine cut in skirting dado laid over cement screed bed 15mmthick in CM 1:3 beaded and jointed with grey cement slurry and jointed with white cement ement mortor (1:2) using marble dust with admixture to match with shade of granite complete all as Specified and directed

M&L Cement Concrete type C2 (1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including taking down old unserviceable PVC wall lining with fillet complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed.

S&F 12mm thick semi perforated suspended false ceiling tiles with GRS (Glass Fibre Reinforced gypsum) of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCo 0.5 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS 476 (Part 4)- 1970 and light reflectance of 85% (Min) to be laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanized @ 120 grams per sqm incl both sides comprising of main T runners of size 15 x 32mm of length 1200mm secondary intermediate cross T-of size 15 x 32mm lenght 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel item (galvanized @ 80gm per sqm) i.e 50mm long, 8mm outer dia, M-6 dash fasteners, 6mm dia fully threaded hanger road upto 1000mm length and L shape level adjuster of size 85x25x2mm, Galvanized iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fixed on periphery wall / parition with the help of plastic raw plugs at 450mm c/c and 40mm long dry wall wood screws complete all as specified and directed

M/S SRINIVASA CONSTRUCTION (BID ID -3516296)

SK CONSTRUCTION SYNDICATE & ENGG CO (BID ID -3515585)

M/S RAJ CONSTRUCTION AND COMPANY (BID ID -3515794)

MODERN AGENCY (BID ID -3516326)