Development of CC Road from Davanagere Taluk Border to Arebasapura Village in Harapanahalli Taluk. (HOA DMF 8TH PHASE)

Development of CC Road from Davanagere Taluk Border to Arebasapura Village in Harapanahalli Taluk.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation. Ref to MoRT&H : IRC - IS 164:2015

Providing & fixing Polymer rubberised factory made Black & Yellow coloured Speed retarders/Breakers with width 350mm & Height 50mm as per IRC 99:2018 with load carrying capacity upto 30t in lo...

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.2...

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

Dry Lean Cement Concrete Sub-base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conformingto IS: 383, the size of coarse aggregate not exc...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Boundary pillar / Guard Stone:- Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting

RCC Drain Davanagere Taluk Border to Arebasapura Village in Harapanahalli Taluk.

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Form work for drain Raft Rate Derivation as per Addendum I Percentage Additionalities for Formwork, Centering Scaffolding 3 percent of formwork for All other types

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Form work for drain sides and slab Rate Derivation :- as per Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding 35 percent formwork for Cement Concrete Drain Walls

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Cross Drain Davanagere Taluk Border to Arebasapura Village in Harapanahalli Taluk.

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Form work for drain Raft Rate Derivation :- as per Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding 3% of formwork for All other types

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Form work for drain sides and slab Rate Derivation :- as per Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding 35% formwork for Cement Concrete Drain Walls

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Metal Beam Crash Barrie Road from Davanagere Taluk Border to Arebasapura Village in Harapanahalli Taluk.

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Providing and erecting a W metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Shifting of Electric poles and Tranformers Road from Davanagere Taluk Border to Arebasapura Village in Harapanahalli Taluk

PSCC Pole - 9 Mtr Long, 200 Kg WL

PSCC Pole - 9 M Long, 200 Kg WL Labour Cost

PSCC Pole - 9 M Long, 200 Kg WL Labour Cost

PSCC Pole PSCC Pole - 8 M Long, 200 Kg WL Material Rate

PSCC Pole PSCC Pole - 8 M Long, 200 Kg WL

DP Transformer Structure using RCC Pole - 9 Mtr Long, 145 Kg WL

Transformer grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs

Transformer grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs

8 SWG GI wire for guard loops

Guy wire 7/10 SWG

9 kV Lightning Arrester, Metal oxide,10 kV, 5 kA Polymeric Type with ground disconnector

LT Electronic TriVector Meter 5 Amps, - 0.51.0 Accuracy ClassPlease see CDS - 39

LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) SINGLE CIRCUIT i) Al Lead Wire - 50 Sqmm ii) Heavy Duty Long Barrel Copper Lug - 50 Sqmm iii) PG Clamp - Rabbit to 50 Sqmm iv) ...

11 kV, 45 KN Polymeric Insulato

Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07

Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For PSCC Pole 300 KG WL

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For PSCC Pole 300 KG WL

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For PSCC Pole 300 KG WL

11 kV, Solid Core Type HG Fuse Unit

LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace -For PSCC Pole 200 KG WL (for Garding

LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - For PSCC Pole 200 KG WL (for Garding

LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - For PSCC Pole 200 KG WL (for Garding)

Insulator 1.1 kV Ceramic Pin Insulator With GI pin

No. 8 Strain Insulator

Rabbit ACSR (6/3.35 mm Al 1/3.35 mm St), Std Wt: 214 Kg/KM

Rabbit ACSR (6/3.35 mm Al 1/3.35 mm St), Std Wt: 214 Kg/KM

Rabbit ACSR (6/3.35 mm Al 1/3.35 mm St), Std Wt: 214 Kg/KM