Chittupur Bhagalpur Bund Ke km 0.550 par Badh Chauki Ka Nirmaan Karya

Amount

Lot No. 04

Earth work in foundation including digging and refilling the trenches with its proper disposal witjin 30 metres lead & 1.5 meter lift etc complete for proper completion of work.

Providing and Laying Cement Concrete P.C.C. M-10 (1:3:6 ) in foundation with stone ballast & Coarse sand I/C all cost of material,labour and T.& P. etc. complete for proper completion of work.

1st class brick work M-150 in foundation to super strucure 1:4 cement mortar including all cost of materials,T&P and labours etc.complete for proper completion of work.

Reinforced Cement Concrete M-20 1:1.5:3 (Cement, coarse Sand and stone grit) in plinth beam, lintel beam & slab including cost of all material, labour, T&P, Mechanical Mixing, Curing etc complete for proper completion of work .

Providing of reinforcement Cutting, bending, binding and placing reinforcement including cost of all materials, Labour T&P etc. Required for proper completion of work

Centering and shuttering for R.C.C. work including all cost of materials,T&P labours and other accessories required for proper completion of work.

Earthwork by power Transport for a lead of up to 1 Km. including excavation loading, unloading, stacking, manual compaction & dressing including all lift shall be applicable for lead up to 1 Km.complete for proper completion of work .

Providing and Laying 40mm thick C.C. 1:2:4 with cement,coarse sand stone bllast including all cost of materials,T&P and labours etc.complete for proper completion of work.

12 mm thick plaster with 1:4 Cement mortar consisting of 1 part cement and 4 part coarse sand 1.25 F.M minimum thickness not to be less then 10mm including supply of all materials labour and tools and plants etc. required for proper completion of work.

C.P Teak wood/ sal wood/deodar wood wrought framed and fixed including simple moulding,straight work as in chaukhats excluding supply of all materials but including cost of labour and tools, plants etc. required for proper completion of work.

Providing and and fixing of 32 MM thick flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.

Supply and fixing of 4.5 cm thick C.P teak wood fully panelled and window shutters i/c supply and fixing of wooden cleats and stops and i/c fixing & adjustment of hinges,bolts locks,handles spring and /or other fittings but excluding their supply and i/c painting with two coats of black japan on all iron fitting if necessary & i/c fixing the glass panes with putty & bard. Glass to be 0.64kg(21oz fitting with necessary screews to be supplied departmentally.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two Coat

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with two or more coat

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size - 600 X 600 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete : 100x10 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (250x16mm)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (On wood or Iron surface)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel windows by welding.

Providing & Fixing water closet Squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 ltr low level white PVC flusing cistern with manually contrilled device (handle lever) confermng to IS : 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White vetreous china orrisa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (630 X 450 mm.)

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes (100 mm dia pipe)

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75mm outlet

P/F Concealed Galvanized mild steel tube (medium grade) IS :1239 (Part-I) 1979 complete with fitting and clamps, including cutting and making goods the wall etc complete. 15mm dia (Internal work)

P/F C.P. brass angle valve for cistern , wash basin, Gyeser etc 15mm nominal hole size including cost of all materials, labour T&P etc.

Providing / fixing 15mm nominal hole size C.P. stop cocks.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 Amodular switch, connections etc. as required. (For light plugs tobe used in non residential buildings)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DB to SB)

Supply, Installation, Testing and Commissioning of 1200 mmsweep,BEE 5 star rated, ceiling fan withBrush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2nos. canopies, shackle kit, safetyrope, opperwinding,PowerFactor not less than0.9,ServiceValue(CMM/W) minimum 6.85,Air delivery minimum 215 CMM,350 RPM (tolerance as per IS : 374-2019), THDlessthan10%,remoteor electronic regulator unit forspeed control and all remainingaccessories including safety pin,nut bolts,washers, temperaturerise=75 degree C (max.), insulationresistance more than 2 mega ohm,suitable for 230 V, 50 Hz, singlephase AC Supply, earthing etc.complete as required.

Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and and fixing galvanized mosquito heavy quality iran wire gauge of expanded metal heavy quality our windows and including C.P.teak wood battens 3cmx10cm with servers and including supply of all in materials, labour and tools and plants etc. required for proper completion of work.

Providing and laying "Brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other , over 20mm thick base of cemet mortor 1:4 cemet and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortor mixed with water proofing compoud in 1:4 cement and coarse sand mortor finished smooth and top mashed false square 30cm x 30cm and side wall parapet shall be mono tythic plaster wall upto 30cm height and junction and corner shall be rounded by bbrick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & includig S/o all material , labour T & P etc. copmlete for proper completion of work.

M/S MITHILESH PAL (BID ID -5199007)

M/S MOHD SAYEED CONTRACTOR (BID ID -5197029)

M/S Anil Kumar Rai (BID ID -5197034)