SMART PERIODICAL SERVICES TO CERTAIN ACCN UNDER AGE B/R-II OF GE (NORTH) UDHAMPUR

Amount

Demolition of cement concrete (Unreinforced) ground floor n.exc 15 cm thickness at any situation complete all as specified and as directed.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, stuctural steel frame , etc complete all as specified and as directed.

Demolation of brick work or stone boulder masonery built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius but in CM 1.6 complete all as specified and as directed.

S/F in repair 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber /GI/ Aluminium grid/ framework with screws complete all as specified and as directed.

S/F Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridges, complete all as specified and as directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of wrought iron or mild steel dia work of any description complete all as specified and as directed.

S&F in repair Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conf to IS 1161-1998 grade St-240 complete all as specified and as directed.

S&F in repair Roof trusses (framed) trusses purlins cranes / ganttries , rails & fastering & heavy bracket cleats (including distanence pleus cuats etc) Fe-410W (Gde-E-250 quality-A) complete all as specified and as directed.

S&F PCC 1:4:8 type D-2 (Using 40 mm graded crushed stone aggreagates) as in floors 75mm thick complete all as specified and as directed.

M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over and including 25 mm thick sand cushioning complete all as specified and as directed.

Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1mm wall care putty complete all as specified and as directed.

M & L two coats of cement base paint over newly plastered surfaces of wall including one coat of primer including preparing surfaces complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified and as directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Non skid coloured ceramic tiles area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, 7mm to 8mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick of CM 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles any colour 10mm thick (Square or rectangular) poliahed, area of each tile not exceeding 0.36 sqm in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick of CM 1:4 complete all as specified and as directed.

S&F Glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick cement plaster on fair face of brick work in cement mortar 1:4 as in backing coat for wall tile complete all as per specified and directed by engr-in-charge.

M&L for preparation of new steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete spray painting complete all as specified and as directed.

S&F in repair Solid PVC Wall Lining (Wall Panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & directed by Engr-In-Charge

M&L for complete removal of existing treatement by scraping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia 7"/9" to make the surface free from dust, loose paint etc, by skilled labour complete all as directed.

M&L for waterproof cement based putty exterior grade @ 1Kg (undiluted) per Sq mtr. of average thickness 1mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit ofr above to make the surface free from dust etc, by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time dry the putty surface.

M&L for waterproof cement based putty @ 1Kg (undiluted) per Sq mtr. of average thickness 1mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit ofr above to make the surface free from dust etc, by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time dry the putty surface.

M&L for applying two coats of oil bound distemper using airless technology with max working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro paint manufacturer and as mentioned in PS and accessories for applying distermper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted)/10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting subsequent coats complete all as specified and as directed.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Colour stay technology, excellent Drit pick up resistance with low VOC less than 50 gram/litre as per LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted with water as per manufacturer instructions applied over priming coat with fully automatic airless stray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. NOTE for BOQ item srl nos. 29 to 34:- (1) Site for application is at various locations and height varying upto 15 m above GL. (2) All scaffolding work and safety measures such as provision of props and supports shall be of steel and extent of provision shall be to the entire satisfication of Engineer in Charge. (3) The work shall be executed by authorized applicator of manufacturer of materials.i.e. Emulsion, putty, distemper etc which is proposed to be used by the contractor and approved by Engineer in charge prior to commencement of work. Make of materials shall be as per Appendix A of particular Specifications. (4) Quoted rate is inclusive of cleaning of window glass panes and floors after execution of work. Quoted rates shall deemed to include for above provisions and nothing extra shall be admissible to the contractor on this account.

Preparation of old painted wooden surfaces of any description exceeding 10 cms width or girth and applying one coat of synthetic enamel paint any colour, complete all as specified and directed.

Preparation of old or previously painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint,any colour complete all as specified.

M&L for preparation of old surfaces (Plastered or unplastered) of walls including cornices, plasters etc including brooming or steel wire brushing, scrapping sown smole soot, moulds, moss, efflorescent salts, trading oil, greasy spots and aplpying one coat of white wash on wall, complete, all as specified and as directed.

M&L for preparation of old surfaces (Plastered or unplastered) of walls including cornices, plasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete, all as specified and as directed.

RAMAN KUMAR (BID ID -3301262)

paras ram pachiala (BID ID -3298752)

RAMAN CONSTRUCTION CO (BID ID -3294818)

MADAN LAL SHARMA AND SONS (BID ID -3296353)