Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹87.1 LAccepted-AOC 1 BAMANAI LUHETA HATHRAS HATHRAS UTTAR PRADESH 204101 | HATHRAS | UTTAR PRADESH | 204101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹98.8 L+₹2.9 L (3.06%)Rejected-AOC 01 NAUJARPUR BASAI KAJI SASNI HATHRAS UTTAR PRADESH 202150 | ALIGARH | UTTAR PRADESH | 202150 | L2 | Rejected-AOC L2 | |
| 3 | L3₹1.1 Cr+₹10.8 L (11.3%)Rejected-AOC | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | Bobby Electricals L1 | VINAYAK ELECTRICALS L2 | shiva engineering AND suppliers L3 |
|---|---|---|---|---|---|---|
| 1.00Supply of Following Matarial as per relevent ISS | ||||||
| 1.01 | Stone Pad | 28 | No | 1 ₹28 Lowest | 160 ₹4,480 | 2 ₹56 |
| 1.02 | Cross Arm holding Clamp | 2 | No | 350 ₹700 Lowest | 350 ₹700 Lowest | 450 ₹900 |
| 1.03 | Earthing Complete | 35 | No | 850 ₹29,750 Lowest | 900 ₹31,500 | 850 ₹29,750 Lowest |
| 1.04 | AL LUG Long Barrel Off Size | 668 | No | 200 ₹1,33,600 Lowest | 400 ₹2,67,200 | 200 ₹1,33,600 Lowest |
| 1.05 | Holding Clamp | 92 | No | 350 ₹32,200 Lowest | 350 ₹32,200 Lowest | 350 ₹32,200 Lowest |
| 1.06 | M.s Top Channel 125x65x2240 mm | 8 | No | 1,400 ₹11,200 Lowest | 3,000 ₹24,000 | 1,400 ₹11,200 Lowest |
| 1.07 | MS Dropper Channel 100x50x2028 mm | 13 | No | 1,400 ₹18,200 Lowest | 2,500 ₹32,500 | 1,400 ₹18,200 Lowest |
| 1.08 | MS Channel T-off 125x65x1300 mm | 6 | No | 1,400 ₹8,400 | 1,200 ₹7,200 Lowest | 1,400 ₹8,400 |
| 1.09 | MS Angle T/F base With Clamp and nut,bolt | 14 | No | 1,400 ₹19,600 Lowest | 1,600 ₹22,400 | 1,400 ₹19,600 Lowest |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
15 Sept 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
se edc hathras
se edc hathras
Business Plan
2025_DVVNL_1069785_1
EDCH-18/2025-26
Open Tender
Electrical Works
Item Rate
120 days
se edc hathras
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
Dvvnl
₹96,000
5 Dec 2025
29 Aug 2025
16 Sept 2025
29 Aug 2025
15 Sept 2025
29 Aug 2025
Amount
Supply of Following Matarial as per relevent ISS
Stone Pad
Cross Arm holding Clamp
Earthing Complete
AL LUG Long Barrel Off Size
Holding Clamp
M.s Top Channel 125x65x2240 mm
MS Dropper Channel 100x50x2028 mm
MS Channel T-off 125x65x1300 mm
MS Angle T/F base With Clamp and nut,bolt
Red Oxide Paint
Aluminium Paint
Barbed Wire
Danger Board
Copper L Piece
Henley Type Tailless Unit Protection Cubicle Panel 500A, 650V
LT Fuse Set Protection Unit for 25 KVA DT with SMC Box
Clamp for LT T-off Channel with N&B
Insulated Weasel Conductor
M/s Nut & Bolt
LT Pole Clamp with N&B
Suspension Clamp
Dead End Clamp
I Hook
Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)
Pcc Pole 8.5 Mtr. Long
STP Pole 11 Mtr. Long
11 KV Steel Cross Arm V Type
11 KV Pin Insulator With Pin
11 KV Disc Insulator With Fitting
Fuse Set
Stay set Complete
25 KVA 11/0.4 KV T/F
250 KVA 11/0.4 KV T/F
LT XLPE/PVC Cable 3.5x70 Sqmm
LT XLPE/PVC Cable 1x400 Sqmm
LT ABC Cable 3x120+1x95+1x16 sqmm
11 KV TPMO with Polymer Insualator
Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.
Pcc Pole 8.5 Mtr. Long
STP Pole 11 Mtr. Long
Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work
Stone Pad
Cross Arm holding Clamp
AL LUG Long Barrel Off Size
Holding Clamp
M.s Top Channel 125x65x2240 mm
MS Dropper Channel 100x50x2028 mm
MS Channel T-off 125x65x1300 mm
MS Angle T/F base With Clamp and nut,bolt
Red Oxide Paint
Aluminium Paint
Barbed Wire
Danger Board
Copper L Piece
Henley Type Tailless Unit Protection Cubicle Panel 500A, 650V
LT Fuse Set Protection Unit for 25 KVA DT with SMC Box
Clamp for LT T-off Channel with N&B
M/s Nut & Bolt
11 KV Steel Cross Arm V Type
11 KV Pin Insulator With Pin
11 KV Disc Insulator With Fitting
Fuse Set
11 KV TPMO with Polymer Insualator
LT Pole Clamp with N&B
Suspension Clamp
Dead End Clamp
I Hook
Installation of 25 KVA 11/0.4 KV T/F on newly constructed double pole in proper alignment direction & making HT/LT connection.
Installation of 250 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work
Safe Dismenteling of old and used following T/F from Double Pole with opening of all HT/LT Jumpers, all works which required for dismentling of T/F.
10/16 KVA T/F
100 KVA T/F
Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.
Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.
Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor/GI in 11 KV/LT lines as per RESPO manual and as per direction of supervising engineer.
LT XLPE/PVC Cable 3.5x70 Sqmm
LT XLPE/PVC Cable 1x400 Sqmm
LT ABC Cable 3x120+1x95+1x16 sqmm
Insulated Weasel Conductor
Construction of plinth of size 2x2x1.5 M above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.
Pipe & Water Level earthing of 250 KVA medium Power Transformers
Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut
Back Cartage of Following Material and carriage it up to Store Hathras/ J.E Store all cost of labour and T&P which required for completion of work
10/16 KVA T/F
AB Cable Scrap
100 KVA T/F
VINAYAK ELECTRICALS (BID ID -5534401)
shiva engineering AND suppliers (BID ID -5534946)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .