Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC 12 2 332 21 HILL COLONY OPP SUNRISE SCHOOL MEHDIPATNAM HYDERABAD 500028 | HYDERABAD | HYDERABAD | TELANGANA | 500028 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹49.3 L+₹6.8 L (15.9%)Rejected-Finance A BLOCK FLAT NO 301 SPECTRA METRO HEIGHTS NAGOLE HYDERABAD RANGA REDDY TELANGANA 500 068 | HYDERABAD | RANGA REDDY | TELANGANA | 500068 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹50.0 L+₹7.5 L (17.6%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹50.5 L+₹8.0 L (18.7%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹50.5 L+₹8.0 L (18.7%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | SM CONSTRUCTIONS L2 | PAVAN ENTERPRISES L5 | M/s K Venkateswara Rao L7 | hari enterprises L4 | SUN LIGHT HOUSE L6 | Indu Electricals L3 | rahi consultant L1 | M.R.ENTERPRISES L4 | WELDECOR L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified. | 20 | Cum | 600 ₹12,000 | 410 ₹8,200 | 395 ₹7,900 Lowest | 400 ₹8,000 | 412 ₹8,240 | 400 ₹8,000 | 500 ₹10,000 | 400 ₹8,000 | 400 ₹8,000 |
| 2.00 | TMT Bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia | 1,000 | Kg | 500 ₹5,00,000 | 120 ₹1,20,000 | 128 ₹1,28,000 | 130 ₹1,30,000 | 122 ₹1,22,000 | 130 ₹1,30,000 | 100 ₹1,00,000 Lowest | 130 ₹1,30,000 | 130 ₹1,30,000 |
| 3.00 | TMT Bars 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia | 500 | Kg | 500 ₹2,50,000 | 120 ₹60,000 | 128 ₹64,000 | 130 ₹65,000 | 133 ₹66,500 | 130 ₹65,000 | 100 ₹50,000 Lowest | 130 ₹65,000 | 130 ₹65,000 |
| 4.00 | M&L for reinforced cement concrete 1:2:4 using 12.5mm graded stone aggregates as in shelves/counters etc complete all as specified. | 10 | Cum | 6,000 ₹60,000 | 5,990 ₹59,900 | 5,995 ₹59,950 | 6,000 ₹60,000 | 5,650 ₹56,500 | 6,000 ₹60,000 | 4,500 ₹45,000 Lowest | 6,000 ₹60,000 | 6,000 ₹60,000 |
| 5.00 | M&L for reinforced cement concrete 1:2:4 using 20mm graded stone aggregates as in Chajja/Parapet wall etc complete all as specified. | 10 | Cum | 6,200 ₹62,000 | 5,990 ₹59,900 | 5,995 ₹59,950 | 6,000 ₹60,000 | 5,760 ₹57,600 | 6,000 ₹60,000 | 5,000 ₹50,000 Lowest | 6,000 ₹60,000 | 6,000 ₹60,000 |
| 6.00 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter | 25 | Sqm | 600 ₹15,000 | 340 ₹8,500 | 365 ₹9,125 | 350 ₹8,750 | 365 ₹9,125 | 350 ₹8,750 | 200 ₹5,000 Lowest | 350 ₹8,750 | 350 ₹8,750 |
| 7.00 | Form work for soffits of shelves/slabs of flat surfaces rough finished n. exc. 200mm thick complete all as specified. | 200 | Sqm | 1,000 ₹2,00,000 | 280 ₹56,000 | 265 ₹53,000 | 250 ₹50,000 | 258 ₹51,600 | 250 ₹50,000 | 200 ₹40,000 Lowest | 250 ₹50,000 | 250 ₹50,000 |
| 8.00 | Form work for sides/egdes of shelves/slabs of flat surfaces rough finished exc 50mm but n. exc. 100mm thick complete all as specified. | 750 | RM | 500 ₹3,75,000 | 160 ₹1,20,000 | 175 ₹1,31,250 | 150 ₹1,12,500 | 145 ₹1,08,750 | 150 ₹1,12,500 | 50 ₹37,500 Lowest | 150 ₹1,12,500 | 150 ₹1,12,500 |
| 9.00 | Mild steel framed work of Fe-410-0 as in grills / guard bars Ladders / shouldered/ welded with frames complete all as specified | 2,000 | Kg | 200 ₹4,00,000 | 110 ₹2,20,000 Lowest | 135 ₹2,70,000 | 120 ₹2,40,000 | 126 ₹2,52,000 | 120 ₹2,40,000 | 120 ₹2,40,000 | 120 ₹2,40,000 | 120 ₹2,40,000 |
| 10.00 | Repair to RCC Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete, including curing the same for 14 days all a specified in IS 9012-1978 all as specified and directed. | 1,500 | Sqm | 300 ₹4,50,000 Lowest | 390 ₹5,85,000 | 396 ₹5,94,000 | 380 ₹5,70,000 | 388 ₹5,82,000 | 380 ₹5,70,000 | 300 ₹4,50,000 Lowest | 380 ₹5,70,000 | 380 ₹5,70,000 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
3 Sept 2025, 6:00 pmClosed
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
REPAIRS TO CHAJJA/ PROJECTION OF WINDOW/VENTILATOR, REPAIR TO PLASTER, PLINTH PROTECTION, CLEANING OF OVERHEAD DRINKING WATER TANKS, REPAIR TO GI PIPE AND CONNECTED ITEMS AT ZONE B DRDOTOWNSHIP , MES QTRS, GE(I) OFFICE COMPLEX AND CHESS COMPLEX AT KA
2025_MES_723433_1
8975
Open Tender
Civil Works
Item Rate
240 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹98,000
Yes
28 Nov 2025
30 Jul 2025
5 Sept 2025
30 Jul 2025
3 Sept 2025
13 Aug 2025
Amount
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.
TMT Bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia
TMT Bars 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia
M&L for reinforced cement concrete 1:2:4 using 12.5mm graded stone aggregates as in shelves/counters etc complete all as specified.
M&L for reinforced cement concrete 1:2:4 using 20mm graded stone aggregates as in Chajja/Parapet wall etc complete all as specified.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter
Form work for soffits of shelves/slabs of flat surfaces rough finished n. exc. 200mm thick complete all as specified.
Form work for sides/egdes of shelves/slabs of flat surfaces rough finished exc 50mm but n. exc. 100mm thick complete all as specified.
Mild steel framed work of Fe-410-0 as in grills / guard bars Ladders / shouldered/ welded with frames complete all as specified
Repair to RCC Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete, including curing the same for 14 days all a specified in IS 9012-1978 all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.
M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.
Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified.
Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and complete as specified.
Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed by Engineer-in-Charge. Note : WPC and chicken wire gauge will be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.
M&L for cement plastering 10mm thick in cemet mortar (1:6) on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L for cement plastering 5mm thick in cemet mortar (1:3) as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Preparation of new plastered surfaces of walls including preparation of complete surface by using Birla cement white putty to obtain smooth surface and applying two coats of Oil emulsion paint. over a coat of primer all asspecified..
Preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified.
Preparation of old plastered/ unplastered surfaces of Ceilings including cornices,pillasters etc by brooming down or steel wire brushing including filling up of holes/cracks using white correct/wall putty and removal of nails and applying one coat of white wash complete.
Preparation of old decorated plastered or unplastered surfaces of walls including bromming down or steel wire brushing , scrapping down smoke soot, moulds moss and efflorosecent salts and trading oil and greasy sports and including filling the nail holes/depressions by using filling compound of Altek/Birla white putty to obtain even and smooth finish and applyning one coat of Oil bound distemper.
M&L for preparation of new plastered surfaces of walls and applying two coats of Apex Ultima exterior emulsion paint over and including priming coat of exterior primer and 3mm thick Birla wall care putty complete all as specified and directed.
Preparation of old decorated surface of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified..
Preparation of old painted surfaces of steel of any descreption over 10 CM width or girth and applying one coat of synthetic enamel paint all as specified.
Dismantling of asbestos/fibre cement corrugated/semi corrugated sheet in roof covering including ‘J’ or ‘L’hooks complete all as specified.
Dismantling timber scantlings 40 sq. cm and in fillets, rails, posts, rafters, purlins, etc. under 40sq. cm in section
S&F MS hollow rectangular/square tubes/pipes of YST 310 Grade as in frame work for roofs/sheds/chajjas etc and like similar items including welding/fixed with conn plates etc. complete all as specified.
M & L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of having TCT 0.45mm thick, rib height 28mm, Min. G300 Mpa Grade, pitch 200mm with 16mm step depth, colour as approved as in roof covering, including supply and fixing of ridge of plain sheet of same colour, material and manufacturer fixed with fasteners/screws as recommended by manufacturer complete all as specified. Note : 1. End of the sheet factory molded 900 round (Minimum 30 Cm depth). 2. Fixing of sheets will be done strictly according as per manufacurer's instructions.
Disconnecting existing tanks of exc 500 & n exc 1000 ltr capacity , setting aside (or lowering if required) for repairs, cleaning and washing properly with bleaching powder etc, and hoisting if required reconnecting and re-fixing in position.
Cleaning and removing all scale and dirt and washing properly with bleaching powder etc, from tanks of exc 500 & n exc 1000 ltr capacity and from mouths of circulating pipes, etc
S&F in repair doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as directed.
S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.
Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re- fixing or removal to store
Refixing old steel tubing of 25 mm bore and connections in new or old position (Walls, ceiling, floors, etc.)
S&F 25 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc
Taking up or down steel tubing of 20MM bore and connections, including cleaning for re- fixing or removal to store
Refixing old steel tubing of 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc.)
S&F 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re- fixing or removal to store
Refixing old steel tubing of 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.)
S&F 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc
S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms)
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) all as specified & directed.
S&F PVC SWR pipe 110mm dia pipe single socketed in any length with rubber ring joints fixed to walls all as specified & directed.
S&F 110mm PVC (SWR )bends with access door of any radius all as specified & directed.
S & F in repairs heavy 800 GM's plastic round water tank lid/cover unbreakable with base and top screwed to the base over existing PVC water storage tank of 500-1000 Ltr capacity alongwith necessary screws/nut & bolts complete all as specified & as directed by Engineer- in-charge.
M&L for Guniting to existing RCC members after removing all dismantling loose concrete & preparations of surface, application of derusting chemical such as Dr FIXIT Rust Remover or equivalent, welding additional bars if found necessary, priming reinforcement bars with a coat of zink primer of coating not less than 40 mic, provision of bonding agent with bonding material like Dr FIXIT Bonding Agent and repair to external RCC structure with slurry tight and strong form work and short creat concrete of mixed 1:3:1 (one part of cement three part of coarse sand and one part of 10mm and down aggregate) of minimum 40mm thickness, curing the same for 14 days all a specified in IS 9012-1978 incl 10 mm thick rendering in CM1:4 finishing surfaces even and smooth complete all as directed.
Removing plant including roots by dismantaling of brick work PCC/RCC including necessary saffolding any type in any location/position i.e roof , parapet wall near pipes etc and applying acid after removeing roots for preventing the regrowth and making good of disturbed portion useing PCC 1:2:4 type B0 & 10mm thick plaster in CM 1:3 size of disturbed portion 150 x 150 x 200mm complete all as specified & directed by Engr - In - Charge. Note : Work to be carried out up to 05 storey bldg.
M&L for Complete removal exsisting old treatment (old painted surfaces) Finishing walls with Premium Acrylic Apex Ultima exteriror paint of required shade and applying two or more applied @ 1.67Ltrs/10 Sqm over and including priming coat of exterior @ 2.20Kg/10 Sqm over 1mm thick altek / birla white putty all as specified and as directed by Engr-in-charge.
SM CONSTRUCTIONS (BID ID -3399796)
Indu Electricals (BID ID -3414981)
WELDECOR (BID ID -3415007)
hari enterprises (BID ID -3414589)
M.R.ENTERPRISES (BID ID -3413708)
PAVAN ENTERPRISES (BID ID -3413531)
SUN LIGHT HOUSE (BID ID -3414893)
M/s K Venkateswara Rao (BID ID -3414270)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .