SPL REPAIRS TO OR MD ACCN BLDG NO P-25 (01 TO 08) OF MAHAR LINE AND PROVN OF 01 X URINAL POINT WITH SHED AT TRG AREA OF MAHAR AT DIPATOLI POCKET OF RANCHI MIL STN

Amount

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Brushing neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and directed

Demolition of RCC in floors (other than ground floors beams, chajjas, lending slab and similar suspended works complete all as specified and directed.

M&L PCC (1:3:6) Type C2 (40mm graded aggt) 75mm thick without using extra cement as in plinth protection, complete all as specified and directed.

M&L providing, cement concrete as in roof kerbs or mud stops, filling around hold fast etc. to rounded or chamfered on edges of (1:2:4) Type B 1 (using 20 mm graded aggregate) complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Machine cut cuddapa stone slab 20-25mm thick over 15mm thick CM (1:6) cement screed base laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

M&L Non-skid colour ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 sqm but n exc 0.11sqm in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed.

M&L Non-skid colour ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 sqm but n exc 0.18sqm in floor over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350mm x 250mm x 7mm or 450mm x 350mm x 7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

Ditto item No 11 but in skirting including 10mm thick screed bed in CM (1:4) complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:4) on wall of brick work or concrete surface, finished fair and even complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on wall of brick work or concrete surface, finished fair and even complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar (1:3) on ceiling of brick or concrete surface, finished fair and even complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all qoins arches, pillars etc built in cement mortar, complete all as specified and directed.

M&L Brickwork with sub-class 'B' old size bricks, straright or corved on plan exc 6m mean radius built in Cement mortar (1:6) complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of distember oil emulsion white or tinted on wall surfaces complete all as specified and directed.

M&L for preparation of new surfaces and applying three coats of white wash on wall surfaces including cornices etc complete all as specified and directed

M&L for preparation of old surfaces and applying one coat of white wash on wall including cornices etc complete all as specified and directed

M&L for preparing of old surfaces and applying one coat of distember oil emulsion white or tinted on walls complete all as specified and directed.

M&L for Preparing surfaces plastered on new surface of wall and applying two coats of cement base paint complete all as specified and directed

Preparing the old wall surface and apply one coat of cement base paint complete all as specified and directed

M&L for preparation of new surfaces and applying three coat of white wash on ceiling including cornices etc complete all as specified and directed

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq. m each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sq. m each, complete all as specified and directed.

Taking down shutters of any description exc 1 but n exc 2 sq. m each, complete all as specified and directed.

Material and labour for refixing existing shutter of any descriptions exceeding 1 Sq.m and not exceeding 2 sq.m each in the same opening complete all as specified and directed.

M&L Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed.

S&F Plain framed, panelled shutter (two panel) factory made 35 mm thick of 2nd class HW rail and stylewith lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), Kiln seasoned and chemically pressure treated,. complete all as specified and directed.

S&F 2nd class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L Prelaminated particle board 18/19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work framed work as in cupboard.incl leaping all around, complete all as specified and directed.

S&F Continious (piano) hinges, mild steel, bright finish or elecrogalvenised, 30 mm width of flaps(when open), complete all as specified and directed.

M&L for applying 3mm thick wall care putty including rubbing with smooth finish on old or new plastered surfaces complete all as specified and directed

S&F Hasp & staple, 75mm, Aluminium anodised incl bolt to hinge plate and fixed with screws for cupboard, complete all as specified and directed.

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing, complete all as specified and directed.

S&F powder coated alumunium three track sliding glazed windows/door shutter manufactured with approved aluminium section with three sliding shutters each shuttr width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) window frame of cross section 101mm x 40mm x 1.5mm thk (b) Three way trackfor sliding shutter of cross section 91.80mmx31.75mmx1.1mm thick (c) Sliding shutter frame of cross section 40x18x1mm (d) Aluminium glazing strip of size 18.2x16.66mm (e) 4mm thick float glass of superior quality for 2 shutters (f) IDPE rubber gasket for fixing of glass (g) Locking cleat per shutter 01 No (h) 02xsliding rollers per shutters (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width ofaperature 1.40mm for one shutter (k) Fixing screws for frame with wall 06 per window with fancy design

S&F 3mm thick Figured glass, pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and directed.

Supply and fix powder coated alu frame work such as door, window and ventilations as approved aluminium section with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with of aperture 1.18mm and fixed with tinned tack, or galvanised wire staples, complete all as specified and directed.

S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe E-165 complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt 125mm long, complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet, complete all as specified and directed.

S&F Aluminium alloy,anodised handle cast type of size 125mm, complete all as specified and directed.

S&F Stain less steel butt hinges medium weight 100mm size,cold rolled mild steel, complete all as specified and directed.

S&F Ordinary rat tail rod pattern, 300mm spring incl roller and roller plate complete all as specified and directed.

Taking down GI tubing and connection including removing to store of 15mm dia complete all as secified and directed

Taking down GI tubing and connection including removing to store of 20mm dia complete all as secified and directed

Re-fixing only GI tubing 15 mm bore of any grade with all fittings to walls and ceilings or laid in floors complete all as specified and directed. Note GI Tube receivd from item 52 above

Re-fixing only GI tubing 20 mm bore of any grade with all fittings to walls and ceilings or laid in floors complete all as specified and directed. Note GI Tube receivd from item 53 above

Supplied and fixed GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed

Supplied and fixed GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed

S&F in repair Bib taps, 15 mm bore cast copper alloy chromium plated (half turn) fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs pillar tap cast 15mm bore copper alloy fency type with capstan head chromium plated screwed down high pressure with or without lettered head "HOT" or "COLD" with long screwed shank and flynuts, screwed for iron pipe (Half turn type), complete all as specified and directed.

S&F in repair angle valve/ stop valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed of size 15mm bore with fency design (half turn type) complete all as specified and directed

S&F in repair Gun-metal, globe or gate valves 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 15mm dia stop valve fancy type chromium plated concealed type, screwed down high pressur, with crutch or butterfly handle, screwed both hands for iron pipe or for unions, complete all as specified and directed.

S&F Chromium plated tubular towel rail, 20mm dia, D type 60 cm long between flanges, complete all as specified and directed.

S&F 500 ltrs capacity PVC rotational moulded polythylene water storage tank (cylindrical vertical closed top) hoisting and fixed in position. including 20mm dia of ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed with anti microbial property, complete all as specified and directed

Disconnecting existing PVC tank of 500 ltr capacity for repairs, cleaning etc including re-fixing in position at same complete all as specified and directed

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Supplied and fixed in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 10 ltr capacity PVC Valveless, syphonic action with dual flushing cistern type low level, white including flush pipe 32mm bore polythylene and pvc connection complete all as specified and directed with fancy design

Supply and fixing in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed.

Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, CP waste coupling 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure pvc connection, complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any ize or patterns) including all heads, shoes, bends, swan-necks etc, complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp, complete all as specified and directed.

M&L PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or fixed to wall with and including stack and clamp, complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement, complete all as specified and directed.

M&L PVC (SWR) bend of radius 110mm dia, complete all as specified and directed.

M&L PVC (SWR) Tee of radius 110mm dia, complete all as specified and directed.

M&L PVC (SWR) junction doule (double T) Tee of equal or anequal 110mm dia, complete all as specified and directed.

M&L PVC (SWR) bend of radius 75mm dia, complete all as specified and directed.

M&L PVC (SWR) Tee of radius 75mm dia, complete all as specified and directed.

M&L PVC (SWR) vent cowl 110mm dia, complete all as specified and directed.

Demolition of cement concrete in ground floors and paving exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L Cement concrete (1:5:10) type E-2 (using 40 mm graded aggregate as in filling around shunken areas complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and directed. NOTE : Water Proofing Compound shall be measured and paid separately

M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement. Note : WPC will be measured and paid separtely

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and directed

M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

Complete removal of all existing roof treatment from RCC roof including old hussion felt and preparation of surface with bire brush and cleaning with water complete all as specified and directed

Brushing net cement slurry @ 3kg/sqm on roof slab, complete all as specified and directed.

M&L for preparation of concrete roof surfaces and applying 15mm thick plaster in CM (1:4) with water proofing compound and finished the surface even and smooth without using extra cement. Note waterproofing compund shall be measured and paid for seprately complete all as specified and directed

M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces, complete all as specified and directed

M&L for applying 3mm thick APP modified polymeric membrane over the bitumen coat surface, weight not less than 3Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions, compele all as specified and directed

M&L for applying two coats aluminium paint over bituminous surface of membrane, complete all as specified and directed

M&L 22 mm thick machine pressed cement concrete tiles with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM (1:4) mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD 200 milli - litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement,as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instructions complete all as specified and directed

Supply only liquid water proofing compound, complete all as specified and directed

M & L for rounding to edges of granite or stone slabs one edge, such as in cooking platform and other similar situations, complete all as specified and directed

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out, complete all as specified and directed.

M&L for preparing the old painted steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing the new surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for applying one coat of synthetic enameled paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC Casing caping 20/25 mm on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Phenolic sheet (Hylem) and steel terminal box, cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 103 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 103 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 103 here-in-before but one bell/buzzer point controlled by one push button on the independent board.

All as per Ser item No 103 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified and directed.

S&F Switch piano type, single pole, one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps, complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed.

S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified and directed

S&F Ceiling rose, 3 terminal PVC / polycarbonate complete all as specified and directed.

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed

M&L for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed

S&F in replacement of building LED security light fitting 48 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut, bolt, washer etc, complete all as specified and directed.

S&F in replacement PVC ventilating air fan single phase 250 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

Excavation over areas n exc 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed.

Excavation over areas exc 1.5 m and n exc 3.00 m deep in hard/dense soil and getting out complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone agg as in fdn filling mass concrete, complete all as specified and directed

M&L hard core of gauge n'exc 63 mm of broken stone or boulders deposited spread and leveled in layers n. exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed

M&L Reinforced cement concrete in mix 1:1½:3 (nominal mix) using 20mm graded aggregates) in foundations, including rafts, footings, plinth beams etc complete all as specified and directed.

M&L providing pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole cover slabs, set in cm 1:4 including necessary form work complete all as specified and directed

M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 110mm bore, laid to slope including packing under and hanuching against the sides of pipes after they are laid and tested complete all as specified and directed

S&F 10mm dia and over TMT bars, cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia, complete all as specified and directed

S&F 6 to 8mm dia TMT bars, cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia, complete all as specified and directed

Brick work with Sub-Class 'B' bricks, in one brick thick honey comp work built in (1:4) cm, complete all as specified and directed

M&L preparing new surface on walls and applying two coats of cement based paint over one coat of primer on external walls, complete all as specified and directed

M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mm x 250mmx7mm /450x 350 x 7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed

M & L joint free Non Skid ceramic colour ceramic tiles 7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm, in floors over and including 15mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

Cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in walls, pillars and posts, etc including caps and bases, complete all as specified and directed

M&L for cement concrete type B1 (1:2:4) using 20mm graded aggregate in copings, bed plates and kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

S&F for mild steel plain black sheet for roof plates with sleeve pieces rivited or welded thereto and similar work of roof and ceiling complete all as specified and directed

Supply and fix 3 mm thick figured glass pin head type glazed with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed

S&F 300 ltrs capacity PVC rotational moulded polythylene water storage tank (cylindrical vertical closed top) hoisting and fixed in position including 20mm dia of ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed with anti microbial property complete all as specified and directed

S&F PVC Connections 15mm size and 375mm length.

M&L Ball brass valves, high pressure with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 15mm bore fixed in repair, complete all as specified and directed

Supply and fixing vitreous china urinal, half stall type, white with grating and union for discharge pipe (excluding flushing cistern, including flush pipe and waste pipe) complete all as specified and directed.

Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrosion protection and heat reflective corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Returning/filling in layer n'exc 25 cm thick including spreading, levelling watering well ramming etc, complete all as specified and directed

Removing excavated soil to distance n'exc 50 mtr and deposited complete all as specified and directed.

M/S SHAMBHU SHARAN SINGH

universal enterprises

M/s Kundu Enterprises

M/S KAMLESHWAR SINGH

Delhi Enterprises

M/S.R.S.Chauhan and Sons