Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹44.0 L+₹37,122 (0.85%)Rejected-Finance | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹45.7 L+₹2.0 L (4.69%)Rejected-Finance | L3 | Rejected-Finance Other Than Lowest Bidder | |
| 4 | L4₹46.5 L+₹2.9 L (6.55%)Rejected-Finance A T ROAD CHABUA DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L4 | Rejected-Finance Other Than Lowest Bidder | |
| 5 | L5₹46.5 L+₹2.9 L (6.64%)Rejected-Finance PO HATIALI SIDING CHABUA DIST DIBRUGARH ASSAM 786184 | CHABUA | DIBRUGARH | ASSAM | 786184 | L5 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹42.7 L
EMD Value
₹85,500
Closing Date
20 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) CHABUA
GE (AF) CHABUA, POST-CHABUA AIR FIELD, DIST-DIBRUGARH, ASSAM-786102
PROVISION OF GUARD ROOM WITH ALLIED WORKS AT TECHNICAL GATE AT AIR FORCE STATION UNDER GE(AF) CHABUA
2023_MES_624818_2
525/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) CHABUA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE(AF) CHABUA
₹85,500
Yes
2 Mar 2024
22 Dec 2023
22 Jan 2024
22 Dec 2023
20 Jan 2024
30 Dec 2023
22 Dec 2023 - 26 Dec 2023
Amount
SCH 'A' PART-I
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
Excavation in trenches, in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, or for shafts, wells, manholes, pier holes, cable laying, sewage/water lines etc complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for TMT bar 10mm dia and over cut to length bent to shape required including cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.
All as per item No. 9 here-in-before but 6mm to 8mm dia complete all as specified and directed.
All as per item No. 9 here-in-before, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter to rough finished of concrete surfaces complete all as specified and directed.
M&L for formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions of any shape etc complete all as specified and directed.
M&L for formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges to fair finished concrete surfaces complete all as specified and directed.
M&L for formwork to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs and landing and similar works complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for columns, pillars, piers, posts and struts etc complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for roof beams and lintels complete all as specified and directed.
M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for slabs supported on walls, landings and like etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 over fair faces of brick/concrete wall surfaces and finishing even and fair complete all as specified and directed.
All as per item No. 20 here-in-before but in CM 1:4 for external wall surfaces and finishing even and fair complete all as specified and directed.
All as per item No. 20 here-in-before but 10mm thick in CM 1:3 as in ceiling finished even and smooth using extra cement complete all as specified and directed.
S&F fixing louvered type glass ventilators using 5mm thick frosted glass strips including aluminium powder coated frame and rubber beading etc complete all as specified and directed.
S&F Factory made wood grain printed solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as specified and directed.
S&F 150 mm anodised aluminium handles cast type complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed.
S&F butt hinges 100mm, cold rolled mild steel medium weight complete all as specified and directed.
S&F 30mm thick Flush shutters, Solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
S&F 125mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling chowkats with PCC 1:2:4 type B-0 (using 12.5mm graded aggregates)complete all as specified and as directed.
S&F 105mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling chowkats with PCC 1:2:4 type B-0 (using 12.5mm graded aggregates)complete all as specified and as directed.
S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
S&F 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed.
S&F galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
S&F 300mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed.
S&F anodised aluminum grill with mesh 75 mm and aluminum bar 6 mm XPM type including all accessories in existing window frame complete all as specified and as directed.
S&F anodized aluminum window and ventilator shutters, fixed type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws etc. including 4.0mm thick tinted glass complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and as directed.
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F three track sliding window with two shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using aluminium anodised sections for (a) Bottom frame - minimum weight 1.065 Kg/m (b) Top frame & vertical - minimum weight 0.929 Kg/m (c) Shutter - minimum 0.456 Kg/m including suitable size handles and lock, etc complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per item No. 42 here-in-before but in skirting over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for coloured designer glazed ceramic tiles of size 300x600x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement concrete screed base laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing, complete over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for kota stone slab 20-25 mm thick in riser of steps, skirtings, dado and pillar laid over cement concrete screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick screed bed in CM (1:4) complete all as specified and directed.
M&L for broken stone hardcore of gauge nexc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in floor subbase complete all as specified and directed.
M&L for 25 mm thick levelling course in cement concrete type B-1 (1:2:4) using 20mm graded aggregate complete all as specified and directed.
M&L for 75mm thick cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of OBD of approved tint and pattern over one coat of primer over a coat of 2mm thick wall care putty on wall complete all as specified and directed.
M&L for preparation newly plastered surfaces of ceiling including chajjas etc and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
S & F Rotational moulded polyethylene water storage tanks 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 15mm bore galvanised steel tubing, medium grade laid in trenches/walls/roofs/ floors including all fittings and necessary cutting of chases for concealed portion etc complete all as specified and directed.
S&F 20mm bore galvanised steel tubing, medium grade laid in trenches/walls/roofs/ floors including all fittings and necessary cutting of chases for concealed portion etc complete all as specified and directed.
S&F 15 mm dia bore bib taps cast copper alloy with, capstan head, CP long body fancy type screwed down for iron pipe 15mm dia complete all as specified and as directed.
S&F 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.
S&F 15 mm dia bore fancy type pillar taps, cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed.
S&F water closet vitreous china pedestal pattern, white with including PVC 'P' or 'S' trap and connection to trap including cement concrete, with and including PVC valveless, syphonic action type flushing cistern, low level, white including brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern, seat cover and health faucet jet spray including making good to floor, complete all as specified and as directed.
S&F vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated complete all as specified and as directed.
S&F brass chromium plated waste coupling 32mm dia including flush pipe for wash basin complete all as specified and as directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in basin platform and urinal partition inclusive of cutting chases/holes if ordered as counter of wash basin platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for machine cut kadappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as supports of granite counter / platforms inclusive of grinding of exposed edges complete all as specified and as directed.
S&F PVC connections 15mm size with Brass nuts of length 450mm complete all as specified and as directed.
S&F Waste pipe any dia (32/40mm) 1.5 mtr long complete all as specified and as directed.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete all as specified and as directed.
S&F 110mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.
S&F 75mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and as directed.
S&F 110mm PVC (SWR) reducer complete all as specified and as directed.
S&F 110mm bore PVC (SWR) branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S&F PVC (SWR) Nahani trap 75mm bore with SS grating with or without holes including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
S&F PVC (SWR) gully trap 125/110 square or round mouthed, type P including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75/100mm dia as required complete all as specified and as directed.
S&F 110mm bore PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and as directed.
S&F PVC (SWR) Coupler 75/110 mm dia complete all as specified and as directed.
M&L providing cement concrete (1:2:4) B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.
M&L water proofing treatment to RCC roof slab, shall be carried out as specified below and as directed by Engineer-in-Charge:- (a) Applying 10mm hick plaster screed bed layer in CM 1:3 on concrete surfaces after preparation of surfaces. (b) Preparing plastered surfaces by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20kg/Sqm of area. (c) Laying App polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 kg/Sqm and 3mm thick with laps & overlaps as specified & joints sealed and applied complete by torch application method. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of engineer-in-charge. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed.
Excavating in post holes (or similar holes) each nexc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.
S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J'/'L' hooks complete all as specified and directed.
All as per item No. 84 here-in-before but plain sheet as in ridges, gutters, facia bd etc complete all as specified and directed.
S&F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (tubular section, Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using Fe 410-W(Gde E-250 Quality- A) complete all as specified and directed.
S&F gusset plates, cleats etc including necessary welding drilling for fixing using Fe 410-W (Gde E-250 Quality- A) complete all as specified and directed.
M&L for preparation of newly steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed .
M&L for 60mm thick rubber moulded coloured glossy finish precast cement concrete interlocking pavers blocks/tiles Grade M-35 made with grey cement and pigment manufactured by automatic hydraulic compression with high compressive strength, any size, pattern and shape, laid dry over and including 30 mm thick sand cushion in patterns with different colour paver block/tiles as in path, as directed by engineer-in-charge complete all as specified.
M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in kerbs etc including necessary form work etc complete all as specified and directed.
All as per item No. 91 here-in-before but in CM 1:4 for external wall surfaces and finishing even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of walls and applying two coat of cement base paint, white or tinted over one coat of primer complete all as specified and directed .
Excavating over areas n.exc 1.5m deep and getting out in soft / loose soil complete all as specified and as directed.
All as per item No. 94 here-in-before but exceeding 1.5m but not exc 3m in depth complete all as specified and as directed.
M&L for cement concrete type B1 (1:2:4) using 20mm graded stone aggregates in precast cover slabs for manholes, baffle wall of septic tank and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete all as specified and as directed.
M&L for 15mm thick rendering in CM 1:4 for internal/external wall surfaces of septic tank/soak well/manhole complete all as specified and as directed.
M&L for 50mm thick cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in floor of septic tank finishing surface even and smooth without using extra complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls as vent pipe of septic tank complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C2 (40mm graded stone aggregates) as in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.
M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed complete all as specified and as directed.
M&L for concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed.
Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight not exc 4 Kg per Sqm and fixing in the same opening complete all as specified and as directed.
Fixing only existing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.
M&L for coloured rubber moulded glossy finish chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry and painted in white or coloured cement in floors including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete inclusive of intricate confirming to Fe-410-W (Gde E-250) if ordered by the engineer-in-charge complete all as specified and directed.
M&L for reinforced cement concrete M-25 (20mm graded aggregate), (Design mix) in Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
SCH 'A' PART-II
M&L for point wiring for one light/fan/bell point controlled by one switch complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly including colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 2009 with provision of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Note:- Cutting chases, making good disturbed surface shall be included in quoted rate and nothing extra shall be paid on this account.
All as per item No. 111 here-in-before but for one 5 amps switch socket combination on independent board complete all as specified and directed.
All as per item No. 111 here-in-before but with 4.0 sqmm conductor for power point complete all as specified and directed.
Supply and fix modular switch 1 way, 6 amps, 1 module complete all as specified and directed.
Supply and fix modular switch 1 way, 16 amps, 1 module complete all as specified and directed.
S&F modular socket, 6 Amps, 2/3 pin combined 2 module complete all as specified and directed.
S&F modular socket, 6/16 Amps, 2/3 pin combined 2 module complete all as specified and directed.
S&F modular fan regulator, 120 watt, 2 module complete all as specified and directed.
S&F modular cover plate with frame, 2 module complete all as specified and directed.
S&F modular cover plate with frame, 3 module complete all as specified and directed.
S&F modular cover plate with frame, 4 module complete all as specified and directed.
S&F modular cover plate with frame, 6 module complete all as specified and directed.
S&F modular metal flush box 1/2 module complete all as specified and directed.
S&F modular metal flush box 3 module complete all as specified and directed.
S&F modular metal flush box 4 module complete all as specified and directed.
S&F modular metal flush box 6 module complete all as specified and directed.
Supply & fixing Modular Lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.
Supply and fixing LED bulb of capacity 9/10 W complete all as specified and directed.
S&F Modular ceiling rose three terminals, ISI Marked complete all as specified and directed.
Supply and fixing LED lights fitting 1x18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and Fixing LED light fitting complete 1x9W, (2Ft long) polycarbonate batten including LED tube, complete all as specified and directed.
S&F sub main wiring with two single core 6.0 Sqmm (nominal area) PVC insulated and unsheathed cables with stranded copper conductor (FRLS), including two run of continuous PVC insulated FRLS copper stranded cable of size 6.0 Sqmm for earth continuity in and including in and including heavy duty PVC concealed conduit of 25mm dia with accessories, complete all as specified and directed.
M&L for earthing complete with galvanized mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm bore medium grade pipe with all fittings from the earth electrode fixed along pole or wall with and including 25 x 6mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth pit to top of earth plate electrode including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel, CI frame etc complete all as directed. NOTES:- (i) The concrete pit shall be made in PCC 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover (ii) Item includes the cost of 7.5 metre GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order (iii) Items includes cost of 7.5 metre earth lead wire. Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides.
Supply and fix MCB Single pole 6 to 32 Amps, breaking capacity 10 KA (Type 'C') complete all as specified and directed.
Supply and fix MCB SPN 40 Amps, breaking capacity 10 KA (Type 'C') complete all as specified and directed.
S&F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
Supply & fix exhaust fan, steel body AC single Phase 230V of size 225 m sweep with, blades and frame and louvers complete all as specified and directed.
Supply, Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh, 240V, 50Hz with Maximum power consumption of 1.5KW, dry powder fero glass line coating technology for inner tank with incoloy heating element with minimum 4 years warranty, ABS outer body complete all as specified and directed.
M&L Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole 20 amps MCB including cutting, chasses and making good disturbed surface to match with existing finish with plaster/distemper complete all as specified and directed.
Supply only hot water & Cold water PVC connection of 15mm bore heavy duty, length upto 45cm with brass nut joints and washers at both ends complete all as specified and directed.
Supply and fixing post top lantern of LED 25W with symmetrical light distribution, spun alumnium landscape luminaire with high power LEDs as light source with suitable GI tubing including all accessories all as specified and directed.
Supply & fixing LED street light luminaries of cap 25 watt, SPD-10KV internal with lense, 240 volt, pressure dia cast aluminium housing frame, heat resistant toughened clear glass with frame complete with accessories, IP 66 protection, pre wired up to a terminal block and mounting attachment, including pvc connector for connection complete all as specified and as directed.
Supply and fix street light bracket made out of 40 mm bore galvanised iron, light grade (approx 1.5 mtr in length) including necessary two nos suitable size of clamp with nuts, bolts and washers, etc and two costs of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.
S&F 1200mm sweep BLDC 5 star ceiling fan with regulator enable motor power input 27 Watt with 10% tolerance, motor insulation B type, 230-240 V, 50 Hz AC supply complete set 3 blade, canopy, shackle including nut, bolts & washers as required complete all as specified and as directed.
Supply and fixing metal body, heavy duty, Air Circulator wall mounting fans, complete with blades, hanging arrangement and accessories, 230 V, minimum 450mm sweep complete all as specified and directed.
Supply and fixing LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with driver and lamp complete all as specified and directed.
Supply laying & testing of XLPE insulated, armoured, heavy duty electric under ground cable with stranded aluminium conductor, 1100 volts grade, sleeving through pipes or fixed on poles & walls or laid under floors/road including jointing with suitable size aluminium lugs complete of size 4 Sqmm nominal cross section 2.0 core complete all as specified and directed.
Supply laying & testing of XLPE insulated, armoured, heavy duty electric under ground cable with stranded aluminium conductor, 1100 volts grade, sleeving through pipes or fixed on poles & walls or laid under floors/road including jointing with suitable size aluminium lugs complete of size 35 Sqmm nominal cross section x 3.5 core complete all as specified and directed.
Material and labour for sand cushioning (dry) in trenches for protection of UG cable (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consolidated (punned) up to 180mm thickness complete all as specified and directed. Note:- Punned thickness shall be measured for payment.
Materials and labour for brick work with Sub Class 'B' bricks well burnt laid breadth wise along the length or cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and directed.
Taking out the existing worm out old and unserviceable ACSR conductor of any size complete all as specified and directed.
Taking down the existing worm out old and unserviceable LT, PCC pole 9 mtr long with PCC foundation complete all as specified and directed.
Supply and fixing steel tubes, galvanised, light grade, ISI marked 50mm bore for protection of cable under floor, road and on wall complete all as specified and directed.
Supply and fix MCCB, 3 Pole, 63 Amps, with breaking capacity 16 KA, Thermal magnetic trip Unit, fixed thermal Fixed magnetic (FTFM), Ics=100% Icu, AC 415 volt, 50 HZ complete all as specified and as directed.
Supply & Fix Factory made, sheet steel distribution boards, VTPN, 4 Ways, 415 Volts double door type, protection class (IP-42) suitable for mounting MCCBs & MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and as directed.
Supply, laying, and testing galvanised iron pipes of 80 mm bore medium grade with ISI Marked with all necessary fittings (such as bends, elbows, tees, short pieces of medium grade pipe, connectors, back-nuts, caps, plugs and unions etc) laying in trenches/floors/ducts and also cutting pipes, screwing, and for making forged bends on piping as required, complete all as specified and as directed.
Supply, laying, and testing galvanised iron pipes of 50 mm bore medium grade with ISI Marked with all necessary fittings (such as bends, elbows, tees, short pieces of medium grade pipe, connectors, back-nuts, caps, plugs and unions etc) laying in trenches/floors/ducts and also cutting pipes, screwing, and for making forged bends on piping as required, complete all as specified and as directed.
Supply, laying, and testing galvanised iron pipes of 25 mm bore medium grade with ISI Marked with all necessary fittings (such as bends, elbows, tees, short pieces of medium grade pipe, connectors, back-nuts, caps, plugs and unions etc) laying in trenches/floors/ducts and also cutting pipes, screwing, and for making forged bends on piping as required, complete all as specified and as directed.
M&L for making joint by cutting of existing CI/GI pipe line of size 100mm to 80mm bore for insertion including tee and tail piece and jointing material complete all as specified and as directed.
S&F 25mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply and fixing, Cast iron sluice valve of size 80mm bore, heavy duty (PN-1.6) with flanged ends, brass spindle any pattern with iron wheel head confirming to IS:14846, including jointing and jointing materials, nuts, bolts, rubber gasket and washers, complete all as specified and as directed.
Construction of brick masonry valve pit/chamber of internal dimension 90 cm x 90 cm x 90 cm depth with sub class 'B' old size bricks in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 6 mm angle iron 3 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary breaking of the existing old chamber, excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m, complete all as specified and as directed.
Supply and fix Spilt AC Unit wall mounted, high wall Split units indoor/outdoor complete with copper condenser cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating, invertor type and capacity 1.5 TR, single phase 240 Volts, 50Hz complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.
S&F Industrial Motorized Siren Single phase 230 Volt, 05 Amp, range 6 KM, MS Horizontal Double Mounting Siren is used in Alarm System to alert people are widely used to address the public while covering a large geographical area complete all as specified and directed.
M/s Parma Construction
M/s Shiva Technical Enterprise
kabitaconstruction
M/s Krishna Construction
J D construction
M/s KL Agarwalla & Co
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .