Repairs, refixing and replacing of Fire Fighting system for Rajiv Gandhi Government Women and Children Hospital, Puducherry.

Amount

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5m including getting out the excavated materials , returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layers by ramming ,watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m - hard rock ( blasting prohibited) - pipes,cables etc. exceeding 80mm dia but not exceeding 300mm dia.

Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 50 mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 25mm nominal bore.

Providing and fixing C.I.double acting air valve of approved quality with bolts, nuts, rubber insertions etc.complete (The tail pieces, tappers etc. If required will be paid separately) - 50 mm dia.

Providing and fixing C.I.double acting air valve of approved quality with bolts, nuts, rubber insertions etc.complete (The tail pieces, tappers etc. If required will be paid separately) - 80 mm dia.

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal board complete with bolts, nuts, rubber insertion etc. (The tail pieces if required will be paid separately) - 100mm dia nominal bore.

Providing and fixing C.I. non return valve (PN 1.6) conforming to IS 5312 and ISI marked, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required will be paid separately) - 50 mm dia.

Providing and fixing C.I. swing type single door Foot valve (PN 1) conforming to IS 4038 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 200mm dia.

Constructing masonry Chamber 60 x 60 x 75 cm inside with 35 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350 x 550 mm top and 165 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design - with brick class designation 35.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/2000 and ISI marked suitable for tyton /push on joints in good condition including transportation of D.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -100mm dia.

Providing and laying Ductile Iron socket and spigot pipes of class K7 (Electro steel/ Sripipes/ Jindal/ Electrotherm / Jai Balaji / TATA Metaliks Kubota) conforming to IS specification 8329/2000 and ISI marked suitable for tyton /push on joints in good condition including transportation of D.I.pipe from production centre / company to the site at UT of Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 12288 and CPWD specification. (earth work and jointing of pipes with rubber gasket will be paid separately) -150mm dia.

Providing and fixing in position flanged standard D.I. specials (Electro steel/Sripipes/Jindal/Kiswok) such as tees, bends, collors, tapers, caps etc.conforming to IS specification 9523/2000 and ISI marked - 100 to 300mm dia.

Providing and fixing D.I. flange adaptor ISI marked, with bolts, nuts, rubber insertion etc., complete -100 mm dia.

Providing and fixing D.I. flange adaptor ISI marked, with bolts, nuts, rubber insertion etc., complete -150 mm dia.

Threading of CI / DI pipes suitable for fixing flanges including transportation,labour charges etc.,complete - 100 mm dia.

Threading of CI / DI pipes suitable for fixing flanges including transportation, labour charges etc., complete - 150 mm dia.

Providing and jointing cast iron / D.I. (S&S) pipe joints with rubber gasket (Tyton joints) conforming to IS No. 5382 and 12820 of EPDM quality including the cost of fixing,testing the joints etc., complete -100mm dia.

Providing and jointing cast iron / D.I. (S&S) pipe joints with rubber gasket (Tyton joints) conforming to IS No. 5382 and 12820 of EPDM quality including the cost of fixing,testing the joints etc., complete -150mm dia.

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 150mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 100mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 80 mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 65 mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 50 mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 25 mm nominal bore

Providing, and fixing of cast iron slim seal type butterfly valve rubber lined with lever operation as per IS:13095. 150mm dia valves

Providing, and fixing of cast iron slim seal type butterfly valve rubber lined with lever operation as per IS:13095. 100mm dia valves

Providing, and fixing of cast iron slim seal type butterfly valve rubber lined with lever operation as per IS:13095. 80mm dia valves

Providing, and fixing ball type foot valve as per IS: specifications. Jockey pump set - 200mm dia.

Providing, and fixing 63mm dia standard make oblique type single head , single out let hydrant valve of approved brand as per IS:5290 specifications together with cap and chain. Hydrant valve.

Providing, and fixing hose reel assembly with swinging and rolling arrangement together with 19mm dia 36 .00 m long hose and 6.25 mm nozzile, 19mm nominal ball valve at tap -off etc as per IS:884 specifications Hose reel

Providing, and fixing 65mm dia controlled percolation hose of 30m length together with end gun metal coupling Controlled percolation hose.

Providing, and fixing 65mm dia standard make gun metal branch pipe and nozzles Branch pipe

Providing and fixing M.S hose cabinet of suitable size to accommodate one number of the above hoses and one number of branch pipe and nozzle in each cabinet. The cabinet will be with a glass fronted lockable door. M.S hose cabinet

Providing and fixing 63 mm dia standard make oblique type single headed yard hydrant valve as per IS: 5290-type A together with cap and chain. M.S hose cabinet

Providing and fixing Fire brigade inlet Siamese connection (4way) manifold including valves and check valve of 150 mm size along with 4 nos, 63mm dia instantaneous inlet arrangements to the main header/ sump with cap and chain etc., Manifold

Servicing of main electric motor driven fire pump for Fire fighting system complete with pump set , electric motor, base frame and all accessories, etc complete working condition as directed by Engineer in -charge. Electric motor

Servicing of main electric motor driven Jockey pump complete with pump set, electric motor, base frame and all accessories, ect, complete working condition as directed by Engineer in -charge. Electric motor Jockey pump

Servicing of Diesel engine driven fire pump complete pump set , suitably rated four stroke diesel engine, drive coupling , common base frame , exhaust manifold, silencer , etc .,complete working condition. as directed by Engineer in -charge. Diesel engine and pump set

Providing and fixing Dial type pressure guage with 100mm dial and a range of ( 1-10 kg/sq.cm ) together with siphon and pet cock. Pressure guage

Supply and Installation of pressure switches together with accessories. Pressure switch

Supply and fixing of Air cushion vessel of size 200 mm dia and 1000 mm long fabricated out of 6 mm thick MS plate with necessary valves, fittings, and accessories Pressure guage

Servicing of steel sheet fabricated cubical type ,wall/ floor mounted fire panel comprising of all accessories like disconnect switches , power contactors, relays, timers, etc, for auto start-up of the 1 no of Electric Main pump and 1no of Jockey pump. etc .,complete working condition. as directed by Engineer in -charge. Auto start up unit

Servicing of steel sheet fabricated cubical type ,wall/ floor mounted fire panel comprising of all accessories like relays, timers, hooters, contactors, indicator lamps ,annunciators, etc for auto/manual operation of diesel engine driven fire pump etc .,complete working condition. as directed by Engineer in -charge. Auto start up unit diesel engine

Providing power wiring together with earthing between the fire panels and the electric motors, battery pack, etc., Wiring motor, earthing and battery

Providing control wiring between the field instruments like pressure switches, etc., to the fire panels . Control Wiring

Supplying and Installation of CO2 type fire extinguisher of 4.5 kgs, capacity complete with necessary fittings, accessories as required Fire extinguisher

Supplying and Installation of ABC Dry Chemical powder type fire extinguisher of 5 kgs, capacity complete with necessary fittings, accessories as required Fire extinguisher

Supplying and Installation of Dry Chemical powder type fire extinguisher of 5 kgs, capacity complete with necessary fittings, accessories as required Fire extinguisher

Supplying and Installation of Mechanical Foam Fire extinguisher of 9 litres, capacity complete with necessary fittings, accessories as required

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 150mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 100mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 80mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 65mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 50mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 40mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 32mm nominal bore

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 25mm nominal bore

Providing and fixing of cast iron slim seal type butterfly valve rubber lined with lever operation as per IS :13095 150mm dia valves

Providing, installing and testing MS class B pipes as per IS:1239 and IS: 3589 including cutting ,welding and jointing the pipes with all fittings ,valves and accessories . The rate also includes one coat of primer and two coat of enamel paint of approved colour but excluding the cost of valves and accessories, etc. 100mm dia valves

Providing and fixing 15mm size pendent type sprinkler suitable to operate at 68/79 deg. C temperature. Pendent type sprinkler.

Providing and fixing Rosette plate for Sprinklers at False ceiling level Rosette Plate

Providing and fixing Hi-tech or equal make factory made supports for hanging the Sprinkler pipe Supports for hanging the Sprinkler pipe

Supply, installing , testing and commission of Miccroprocessor controlled main fire alarm control panel with 5 loop cards, PC/ printer interface and suitable 2A ah, 2A volts, battery back up and 2x40 charactore alpha neumaric LCD display and necessary front panel and control keys as per specification Main fire alarm

Supply, installing , testing and commission of conventional sounder as specified including required hard wares etc., complete as per specification. Conventional sounder

Supply, installing , testing and commission of conventional manual call point as specified including Metal box arrangements and required hardware etc., complete as per specification. Manual call point

Supply, laying , testing and commissioning of 2 core x 1.5 sq.mm FRLS copper flexible cable with necessary supporting/clamping arrangements including civil cutouts and making the damaged portion to good complete as per specification. Wiring

Supply and laying of 2x1.0 sq.mm twisted and shielded copper cables Wiring

Supply, installation , testing and commissioning of the analog addressable photoelectric type smoke detectors with base including required hard wares etc., complete as per specification. Smoke detectors

Supply, installation , testing and commissioning of short circuit isolator as specified including Metal box arrangements and required hard wares etc., complete as per :specifications. Short circuit isolator

Supply, installation, testing and commissioning of monitor module for connecting the conventional type smoke detectors with base including required hard wares etc., complete as per specifications. Smoke detectors conventional type

Supply, installation, testing and commissioning of monitor module for connecting the conventional detectors as required hard wares and power supply units etc., complete as per specifications. Monitor module

Supply, installation, testing and commissioning of control module for connecting the conventional detectors and required hard wares and power supply units etc., complete as per specifications. Control module

Supply and fixing of 75x75x50 mm GI / Cadmium plated MS boxes on surface/ recess for the detector , fixing including making connections etc as required with the necessary supporting arrangements complete as required. MS boxes

Supply and laying of 19mm dia medium gauge PVC conduit with necessary supporting / clamping arrangements including civil cutouts and making the damaged portion to good complete as required. PVC conduit

Supply, Installation, testing and commissioning of the following items. 6 -Watt wall mounting speaker

Supply, Installation, testing and commissioning of the following items. 480 -Watt booster Amplifier

Supply, Installation, testing and commissioning of the following items. 120- Watt Mixing Amplifier

Supply and surface laying of 2 core 0.75 sqmm shielded cable in 19mm dia PVC conduit with necessary supporting/ clamping arrangements including civil cutout and making the damaged portion to good complete as required. Wiring