MAINTENANCE AND REPAIRS TO PIPELINES OVER HEAD TANKS CHECK DAMS WATER STAND POSTS AND OTHER RELATED WORKS - 2nd Call

Amount

Demolition and dismantling to existing footpth

Removing building materials etc. to distance of 100 mtr or under beyond the lead included in the rates including loading unloading and stacking at the distenation

Surface dressing not exceeding 15cm deep and site clearence

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out

Rough excavating not exceedings 1.5m gettng out and hard dense soil

Earth work excavation in Hard dense soil to a depth 1.5 mtr. Height.

Earth work excavation in Hard dense soil to a depth 1.5 mtr. To 3.0 mtr Height.

Earth work excavation in trenches up to a depth 1.5 mtr. Height.

Earth work excavation in trenches up to a depth 1.5 mtr to 3mtr Height.

Earth work excavation in trenches up to a depth 3.0 mtr to 4.5 mtr Height.

Earth work excavation in trenches up to a depth 4.5 mtr to 6.0 mtr Height.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m to 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil

P.c.c. with cement mortar 1:4:8,using 40mm graded metal.

P.c.c. with cement mortar 1:3:6,using 40mm graded metal.

Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in bed block/coping including form work

Sand filling spreading leveling in layers not exc 25cm thickness watering and well ramming under floors withappd soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard/ dense soil

Reinforced cement concrete M 25 ( Design mix) 20 mm graded aggregated as in footings, plinth beams etc in wallst in walls

Reinforced cement concrete M 25 ( Design mix), 20mm graded stone aggregate in footings foundation beams etc. Complete.

Reinforce cement concrete M25 -20 mm graded aggregate as in Column

Reinforced cement concerte M 25 (Design mix) in Slabs supported on walls beams and columns in floors roofs landing balconies canopies deck slabs and in shelevs and the like

Reinforced cement concrete M-25 type B1 using 20mm graded stone aggregate as in walls

Liquid water proofing compound

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hopping ends and binding with and including MS wire not less than 0.9mm dia.

Form work to sides of foundation footing etc

All as per item No 11 but in beam

All as per item No 12 but in columns pillars

Form work to fair finished concrete surfaces as in sides and soffits of roof /floor slabs-Sqm

Form work to fair finished concrete surfaces as in sides ofparapet /walls /partitions-Sqm

Brick work with cement mortor built in cement mortor 1:6

Rendering in c.m.1:4, 15mm thick on fair faces of brick work or concrete surface finished even fair Sqm

Rendering in c.m.1:6, 15mm thick on fair faces of brick work or concrete surface finished even fair - Sqm

Rendering in CM 1:3, 15mm thick on ceiling

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.

White cement washing to inner surfaces including preparatory work

Distembeering two coats over a coat of primer including preparatory work

White washing Two coats including preparation of ceiling surface

Removing excavated materials n.exceeding 50mtrs. Distance including loading unloasding etc. Complete.

S&F MS framed work such as grills guard bars ladders railing etc.

Two coats of painting over a coat of primer including preparatory work

Galvanised steel tubes medium grade 80mm dia

Galvanised steel tubes medium grade 50mm dia

Galvanised steel tubes medium grade 75mm dia

Galvanised steel tubes medium grade 40mm dia

Galvanised steel tubes medium grade 25mm dia

Galvanised steel tubes medium grade 15mm dia

Supplying and fixing stop valves, on return valves etc.

Trap intercepting the inspection arms fitted with galvanised iron bayonet joint with galvanised iron lever, iron chain ring and hook

S&F Mild steel frame work in covers including angle iron

S&F Sluice valve 200mm bore

Cast iron pipes with spigot and socket ends centrifugally cast class LA, in any length laid in trenches

Supplying and fixing of 15 HP, open well type motor fully automatic along with starter, necessary electrification etc. complete

Supplying and fixing 4 sqmm 3 core copper cable

Supplying and fixing main switch 3 phase 32 Amps, 415 V

Supplying and fixing ML2F Starter fully automative

THANGAM CONSTRUCTION