Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 CrAccepted-Finance BUILDING NO 8 RAJEBAHADUR MANSION A D MARG FORT MUMBAI | MUMBAI | MUMBAI CITY | MAHARASHTRA | ₹1.9 Cr | L1 | Accepted-Finance Lowest rate found. |
| 2 | L2₹2.2 Cr+₹23.1 L (12.0%)Accepted-Finance | ₹2.2 Cr+₹23.1 L (12.0%) | L2 | Accepted-Finance High rate found. |
Tender Value
₹1.6 Cr
EMD Value
₹3.3 L
Closing Date
17 Feb 2023, 2:00 pmClosed
The Exe.,Engg., PWD, WD-I, Daman.
The Multi Office Complex, PWD, 2nd Floor, Near Moti Daman Market, Moti Daman.
Construction of Compound wall, landscaping, pathway, Fountain, other allied restoration and external development works of premises near Govt. House, Fort Area, Moti Daman. (E-30192).
2023_DAMAN_2650_1
Tender Notice No.116/2022-23
Open Tender
Civil Works
Works
180 days
Daman District.
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
The Exe.,Engg., PWD, WD-I, Daman.
₹3.3 L
The Exe.,Engg., PWD, WD-I, Daman.
26 May 2023
8 Feb 2023
17 Feb 2023
8 Feb 2023
17 Feb 2023
8 Feb 2023
14 Feb 2023
Amount
Civil work
SUB ESTIMATE - I: CIVIL, HARDSCAPE, IRRIGATION, LANDSCAPING & FOUNTAIN WORKS- (A) CIVIL & HARDSCAPE RELATED WORKSDismentalings manglore of country tile roofing with battens boarding /flooring etc. including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) Mangalore Tiles roofing.
Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.
Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana /Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but including the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete . Concrete of M25 grade with minimum cement content of 330 kg /cum .(All floor level and up to any height)
Providing and fixing in position bar reinforcement / Tor Steel bar reinforcement (FE 550 D) of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns,canopies, staircases, newels, chajjas, lintels, pardies coping, fins, arches, etc. as per detailed designs,drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete including aProviding fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes all dia bar complete as directed by EIC.
20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
Providing 25 mm cement plaster in two coats under 15 mm thick cement plaster by using Ready Mix Mortar for plaster in single coat on rough (similar) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in Cement mortar 1:6 (1 Cement : 6 sand) and Providing 10 mm thick cement plaster by using Ready Mix Mortar for plaster in single coat on brick/ concrete walls for interior plastering upto floor two level and finished even and smooth in Cement mortar 1:6 (1 Cement : 6 sand).
Providing Second Class Burnt Brick masonry with conventional/ I.S. type bricks in cementmortar 1:6 in super structure & Sub structure including striking joints, racking out joints, watering complete.
Providing and applying paint of Apex Ultima paint of approved quality, colour and shade in two coats including preparing the surface with sand paper , minimum two coat of primer etc. complete as directed.
Providing and laying in position Ready Mixed M-150 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained)
Providing and laying cement based waterproofing treatment to terrace with bricks bats laid in required slope to drain the water for any span after cleaning the base surface applying a coat of cement slurry admixed with approved waterproofing compound and laying the brick bats on bottom layer in C:M 1:4 admixed with approved waterproofing compound filling upto half depth of the brick bats, curing this layer for 3 days applying cement slurry over this layer jointing of brick bats with C:M 1:3 admixed with approved waterproof compound and finally top finishing with average 20 mm thick layers of cement mortar added with jute fibre at 1 kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound (FosRoc / BASF / Dr. Fixit).
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes (Sch - 80), having thermal stability for hot & cold water supply including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer in charge. (Astral/Supreme/Eq.) (32mm dia )
40 mm dia
50 mm dia
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.(Astral/Supreme/Eq.)
20 mm dia
25 mm dia
32 mm dia
50 mm dia
Providing and fixing or replacing damaged teak wood with well seasoned C.P teak wood for door or window frames or members of decorative frame of the same original design, size and pattern including all mouldings, rebating, holdfasts and any other necessary fittings and finishing with one coat of primer complete.
Providing & Fixing salvage Wood from site /specific items from roof/super structure shall be measured as labour charges only.,cleaning ,scraping ,anti termite ,etc shall be done before reused to match to the required size and design as per EIC.
Providing and fixing fine dressed Rajula tiles flooring or Copping of avg stone thickness 20 mm over 40 mm thick bed of cement mortar in ratio 1:4 . Edge of the stone should be machine dressed to achieve a proper straight edge. ( basic rate rajula stone=220/ SFT)
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum
Providing and filling rubbles including hand packing and filling voids with sand as directed including ramming and consolidating etc. complete.
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
providing and Fixing Black and Grey granite cobbles (4" X 4")decorative pattern near main staircase area.
Providing and fixing Black cobble kerb stone (300 mmX 100mm X 300mm)at boarder of main staircases cobble patterns boarder.
Providing cement pointing/Grouting works with including epoxy without pigments for goove filling works in between joint of rajula tiles flooring/Dado.
Providing and fixing pre-polished Black Leather finish Granite(Telephone Black , JAt Black or equivalent) use for dedo of wall, pre-polished granite slabs of approved shade, fixed on a bed of cement mortar 1:4, of Average 25mm thk, flushed with the finished surface of wall, including preparing the surface, cement float, machine cutting, leveling, jointing, pointing joints with neat cement slurry with pigmented additives to match the shade of the stone, 6mm groove in the wall at the junction of stone and finished surface of wall etc., all exposed edges of the ledge shall be chamfered/mouldeded as per drawing all complete as per technical specifications, drawings & as directed by the EIC.
Providing and laying factory made chamfered edge shot blasted Cement Concrete paver blocks in footpath, parks, lawns, etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould,laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 60mm thick (Make : Vyara or Equivalent) M-35 grade with approved colour, design & pattern .
Providing and laying interlocking cement concrete paver blocks 80 mm thick of approved flower designs shape including levelling the base with 40mm thick cement slury 1:5, laying the paver blocks in pattern as directed by the EIC, filling the joints with sand including watering ,rolling and compcting with appropriate tools and plants.
(B) IRRIGATION & LANDSCAPE RELATED WORKS(PIPE WORK)Providing, laying & jointing in position PVC/ HDPE pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, (FINOLEX/ASTRAL/PRINCE)PVC pipe 63mm-6 kg/cm2
PVC pipe 50mm-6 kg/cm2
PVC pipe 40mm-6 kg/cm2
PVC pipe 100mm
PVC pipe 150mm
(SPRINKLERS & ACCESSORIES)Providing & fixing of PGP ULTRA, Pop-up ROTOR sprinkler having variable adjustable arc (50 to 360 degrees)nozzle capable of covering 4.9m -14.0 m at 2.5 Bars with discharge rate of 0.02- 0.891Lps.The Rotor body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic with small exposed cover etc as per approved brand , specification as directed EIC.(Hunter /Weathermatic / Toro)
Providing & Fixing of SJ- 712, 3/4" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo (plastic.Hunter /Weathermatic / Toro )
Providing and fixing of PP service saddle of varying size.3/4'
(DRIP LATRAL AND ACCESSORIES)Supply and fixing of flexible Blank tubing and resistance to UV damage and algae growth black in colour 16 mm size. With all fittings and accessories.( Dripline 16 mm 50 cm 3.8 lphinline lateral)(Jain /Netafim/Mais/Reviluis/equ)
Supply and fixing of flexible Blank tubing and resistance to UV damage and algae growth black in colour 16 mm size. With all fittings and accessories.( Plain Dripline 16 mm plain lateral)(Jain /Netafim/Mais/Reviluis/equ)
Supply and fixing of PC dripers 8lph(Jain /Netafim/Mais/Reviluis/equ)
Supply and Fixing Rod Comes Pre -Bent or plastic lateral stack to Staple Distribution Tubing , Drip Line to Finished Grade. (Jain /Netafim/Mais/Reviluis/equ)
(VALVES & ACCESSORIES)Providing and fixing of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve of size 50mm. (JAIN/FINOLEX/PLASON/ASTRO/GF/FITVALF/PRINCE)
Providing & fixing of Isolation Valve in mainline for bypass and flow diversion of approved quality (JAIN/FINOLEX/PLASON/ASTRO/GF/FITVALF/PRINCE)
Providing & fixing of a double acting 1" Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Including service saddle and riser assembly.
Providing & fixing of 12" Rectangular Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout(EcoRain/ECOAQUA/HUNTER)
Providing & fixing of 10" Round Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout(EcoRain/ECOAQUA/HUNTER)
Providing & fixing of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout(EcoRain/ECOAQUA/HUNTER)
Providing & fixing of Brass Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring. Including service saddle and riser assembly.(EcoRain/ECOAQUA/HUNTER)
Providing & fixing of Brass Key threads into top of QCV to provide water access And Brass Swivel Elbow(EcoRain/ECOAQUA/HUNTER)
(FILTERATION UNIT)Providing & Fixing of DISC FILTER- with capacity matching pump design flow having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working presure of 10 Bars. with pressure gauge.(TIZEAL/FINOLEX/PLASON/MAIS/kimplass)
(PUMPING UNIT)Providing & Fixing of (Monoblock/Openwell submersible) pumpset of having discharge 2 lps@46 mtr head . suitable for pumpset having panel box and fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, etc.(Kirlosker/Anson/Lubi/ equ)
Providing and fixing of control panel suitable for pumpset having panel box and fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, etc.
Providing & Fixing of ,Suction ,Delivery & Header Pipe
Providing & fixing of control Valve /Butterfly Valve in mainline for bypass and flow diversion of approved quality 2"(LP/Kartar/zoloto)
Providing & fixing of Non Return Valve to prevent back flow 2"(LP/Kartar/zoloto)
Providing and fixing of Pressure Release Valve (1.5"Bermad/EQU)
Garden Soil loading, carting & unloading charges including spreading etc complete.
(SPECIES OF SHRUBS/ GROUND COVER) VERBANA MIX (including minimum six months maintenance period.)
HYMENOCALLIS SPECIOSA(DAY LILY) (Including minimum six months maintenance period.)
ACALYPHA WILKESIANA (Including minimum six months maintenance period.)
IXORA CHINESE HEDGE (Including minimum six months maintenance period.)
FICUS BLACK HEDGE(Including minimum six months maintenance period.)
GOLDEN CYPRESS(Including minimum six months maintenance period.)
DOMBEYA WALLICHI(Including minimum six months maintenance period.)
CARYOTA MlTlS (Fish plam)(Including minimum six months maintenance period.)
ROHEO DISCOLOUR(Including minimum six months maintenance period.)
CYCAD DIOON(Including minimum six months maintenance period.)
RAVENALA MADAGASCARIENSIS (TRAVELLER PALM)(Including minimum six months maintenance period.)
PLUMERIA RUBRA DWRAF(Including minimum six months maintenance period.)
ASPARAGUS MEYERI(Including minimum six months maintenance period.)
GARDENIA JASMINOIDES HEDGE(Including minimum six months maintenance period.)
HYDRANGEA PANICULATA(Including minimum six months maintenance period.)
OXALIS TRIANGULARIS(Including minimum six months maintenance period.)
ZEPHYRANTHES CANDIDA(Including minimum six months maintenance period.)
ALOCASIA MACRORRHIZA(Including minimum six months maintenance period.)
CRYNIUM ASIATICUM VARIGATED RED(Including minimum six months maintenance period.)
TABERNREMONTANA DIVARICATA VARIEGATA(Including minimum six months maintenance period.)
COSTUS WOODSONII(Including minimum six months maintenance period.)
SPATHIPHYLLUM(Including minimum six months maintenance period.)
PANDAMUS VARIGATED(Including minimum six months maintenance period.)
TERMINALIA MANTLY VARIGATED(Including minimum six months maintenance period.)
MALPIGHIA TOPIARY(Including minimum six months maintenance period.)
TRADE SCANTIA PALLIDA(Including minimum six months maintenance period.)
SANSEVIERIA TRIFASCIATA(Including minimum six months maintenance period.)
ASYSTASIA COROMANDELINA(Including minimum six months maintenance period.)
PHILODENRON XANADU(Including minimum six months maintenance period.)
CODIAEUM VARIEGATUM HYBRID AMRUTA(Including minimum six months maintenance period.)
TURNERA ULMIFOLIA ELEGANS(Including minimum six months maintenance period.)
HELICONIA PSITTACORUM FIRE FLASH(Including minimum six months maintenance period.)
CALATHEA LUTEA(Including minimum six months maintenance period.)
NYCTANTHES ARBUR TRISTIS TREE(Including minimum six months maintenance period.)
GREVILLEA ROBUSTA(Including minimum six months maintenance period.)
CALLISTEMON VIMINALIS(Including minimum six months maintenance period.)
ANGELONIA ANGUSTIFOLIA(Including minimum six months maintenance period.)
BAUHINIA BLAKEANA(Including minimum six months maintenance period.)
MUSSAENDA PINK(Including minimum six months maintenance period.)
LAGERSTROEMIA SPECIOSA(Including minimum six months maintenance period.)
BOUGANVILLEA VARIGATED(Including minimum six months maintenance period.)
MOUND(Including minimum six months maintenance period.)
(C)FOUNTAIN & RELATED ACCESSORIES-Providing and fixing GI NOZZLE PIPE(32MM DIA) AND COUPLING of approved make, design and specification etc as directed by EIC.
Providing and fixing Submersible Pump (7.5HP) of approved make , design and specification as directed by EIC.( MAKE-LUBI, Crompton or equivalent)
Providing and fixing S.S.STRAINER of approved make , design and specification as directed by EIC. (FOR PUMP)
Providing and fixing of Electric control fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, etc.
Providing and fixing of LED LIGHTS (9 WATT WARM WHITE WITH DRIVER) of approved make , design and specification as directed by EIC.
Providing and fixing LED LIGHTS(3 WATT WARM WHITE WITH DRIVER) of approved make , design and specification as directed by EIC.
Providing and fixing FRP FOUNTAIN POT(4 FT DIA.) of approved make , design and specification as directed by EIC.
Providing and fixing NOZZLE FOR FRP FOUNTAIN POT of approved make , design and specification as directed by EIC.
Providing and fixing Submersible Pump (1.5HP) of approved make , design and specification as directed by EIC.( MAKE-LUBI, Crompton or equivalent)
Commissioning Charges for Fountain and accessories including Plumbing, Pipe, Installation, Fittings etc complete as directed.
SUB ESTIMATE - II (ELECTRICAL WORKS)-Tree Uplighter - 5 - 7W SETC of LED Tree Uplighter/ Ground Burial/ Spike Light (IP 66-67), 1100-1400 Lumens. Make: Phillips, Lafit, Bajaj, osram or Aproved by EIC.
Bollards SETC of LED Bollard Antique/ Heritage look with Base plate. with lumens pakages- 300 to 600, Height 700 to 1000mm, Ingress protection IP-65/66. Make: Phillips, Lafit, Bajaj, osram or Aproved by EIC.
SETC of antique look heritage style post top lantern. Make: Phillips, Lafit, Bajaj, osram or Aproved by EIC.
SETC of heritage style 3.5 mtr height pole. Cast iron make
Flood light -50W SETC of Flood Light IP 66 For Enterance Area Lighting Make: Phillips, Lafit, Bajaj Osram Or Aproved by EIC.
Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.
Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original. Make: sy-aron, Gemini, Telerex(a) 50 mm dia
(b) 90 mm dia
(c) 120 mm dia.
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. Make: RR, Polycab, KEI (a) 4 core 16 Sq. mm
(b) 4 core 25 Sq. mm
(e) 4 core 95 Sq. mm
(f) 4 core 120 Sq. mm
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories. Make: RR, Polycab, KEI (b) 4 wire 4 sq. mm
(c) 4 wire 6 sq. mm
Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Make: HEX, Jainson, 3D (a) 1.5/2.5 to 6 Sq.mm
Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Make: HEX, Jainson, 3D(a) 1.5/ 2.5/4/6 Sq.mm
(c) 16/25 Sq.mm.
(f) 95 Sq.mm.
(g) 120 Sq.mm.
SETC of Mini Section Piller For Power Distribution Power
Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. Make: L&T, Legrand, C&S (c) 63 Amps. FP - Cat III
Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system C Curve and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat. III. Make: L&T, Legrand, C&S
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (d) 2 to 4 core 16 Sq. mm
(e) 2 to 4 core 25 Sq. mm
(h) 2 to 4 core 95 Sq. mm
(i) 2 to 4 core 120 Sq. mm
SETC of Speaker Cable Make: STD or Approved by EIC.
Akshar Shilp
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .