CERTAIN REPAIRS TO DRAIN, PATH AND OTHER MISC REPAIRS UNDER AGE B/R-II AT NAMS

Amount

M&L for brickwork with sub class 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar etc. disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

Description all as per srl item 1.00 above here in before but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brickwork /stone built in cement mortar etc., disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC. complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and fair without using extra cement all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair (w/o using extra cement) complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:6 on of brick work or concrete surface finish even and fair (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all specified and directed

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in fdn/mass filling/drain sub base etc. incl demolition and & disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC., complete all as specified and directed.

M&L for applying two coats of cement base paints over one coat of primer on walls etc, incl preparing new surfaces of walls by brooming down or by steel wire brushing complete all as directed .

M&L for applying one coats of cement base paints on walls etc, including preparing old surfaces of walls by brooming down or by steel wire brushing as directed by EIC.

M & L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm agg) in sub base of flooring including demolition complete all as specified and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick rendering as screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

All as per item 14 here in before but area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.

M&L for green marble 15-17 mm thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps,riser incl rubbing and polishing incl moulding rounding to edge of marble & dismantling complete all as specified and directed.

M&L 50 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panel complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight incl dismantling / demolition and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC., complete all as specified and directed.all as specified and directed.

M & L for 100mm thick PCC 1:2:4 Type B-2 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement laying in bays as specified , rubbish off the primises and incl demolition complete all as Spd & directed .

M&L PCC 1:2:4 type B1 (using 20 mm graded stonr aggregete)as in coping,benching etc complete all as specified and directed.

M&L for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain.

S&F for 110mm bore PVC pipes single socketed with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

Description all as per srl item 20.00 above here in before but laid in trench or in floor

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 having tensile strength of 550 Mpa with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws and incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.

Description all as per srl item 23.00 above here-in –before but except sheeting.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour profile AZ-150 having tensile strength of 550 Mpa as in roof covering/cladding to wall, in ridges, hips, vally gutter, drip complete all as specified and directed by Engineer-in-charge.

S&F mild steelwork in tubular trusses including special shaped washer etc. compleated using ERW induction butt welded tubes confriming to IS 1161-1779 grade St-240 compleate all as specified and directed.

Description all as per srl item 26.00 above heare in before in expect mild steel.

M&L for preparation of new and previously un-treated steel and iron surfaces of any description, not otherwise described exc 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC., complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment with 25mm thick sand filling incl dismantling and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC., complete all as specified and directed.

Description all as per srl item 30.00 above here in before but except paver block shall be reused after necessary cleaning and making good all as specified.

M&L for broken bricks hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces.

M&L for pointing to brick works in CM 1:4 laid flat in drains wall etc incl racking out joints complete all as specified .

M & L for providing pre cast cement concreate louvers and jallers 40mm thick set in cement motor 1:4 of type B-0, 1:2:4 (using 12.5mm graded stone aggregate) measured solid all mouiding but excluding frame (Pre cast frame shall be measured separately and paid for under item 35.00 here-n-after) , incl dismantling and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC., complete all as specified and directed.

M & L for providing pre cast cement concrete (RCC Jali pillars) size of piller 100x100x750mm incl dismantling and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC complete all as specified and directed.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe complete all as specifed and dirtected.

S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc incl taking down old pipe complete all as specifed and dirtected.

S&F for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls, trnches etc complete incl taking down old pipe complete all as specifed and dirtected..

S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)

S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured)

M&L MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 in repairs complete all as specified and directed.

M&L for Reinforced concrete pipes 300 mm dia class NP3 laid and jointed compleate with collers all as per specified and directed

Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 300mm bore including packing under and hunching against side of pipe after they are laid and tested complete all as specified and directed.

M&L for pre cast RCC (1:2:4) type B1(using 20 mm graded stone aggregate). as in cover slabs and set in cement mortar 1:4 including necessary form work and moulds complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over cut to length bend to shape rtequired including cranking binding spirally for hooping for columns hooking and binding with and including mild steel wire(anneled not less than 0.9 mm dia or securing with clips quility conforming to Fe -410 S or Fe 410-0 complete all as specified and directed.

Description all as per srl item 45.00 above here in before but 6 to 8 mm dia complete all as specified and directed.

M&L for machine pressed factory made PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in precast kerb stone incl rounded chamfered edge and set in cm 1:4 incl demolition of old pcc kerb stone of any description complete all specified and directed.

GEE EMM ASSOCIATES

AS CONSTRUCTION

M/s Vijay Construction Co.

Santokh Singh and Associates

Saini Constructions

Jaspal Construction Co.

tarlok singh contractor

M/s. Nirmal Singh