Repairs and Maint to Flooring Plumbing Sunken Treatment Roof Treatment and other B/R Work of SMQ area Map Qtr and Camero Area at Subroto Park

Amount

Taking down steel tubing or removing from site of 15mm and 20mm bore pipe up to forth stories building height all as specified and directed by Engineer-in-charge.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per item bove but 20mm bore

Dismantling existing tanks capacity n. exc 250 ltr and removing up to forth stories building height all as specified and directed by Engineer-in-charge.

Dismantling existing tanks capacity exc. 250 ltr but n.exc 500 ltr,and removing up to forth stories building height all as specified and directed by Engineer-in-charge.

S&F 200 ltr rotational moulded polythene water storage tank (rectangular with closed top) hoisted and fixed in position including the existing GI fitting and pipe complete all as specified and directed by Engineer-in-charge.

S&F tripple layer rotational moulded vertical water storage tanks with closed tops ( cylinderical ) fixhoisted and in position 500 ltr capacity including the existing GI fitting and pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified.

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 20mm fixed in repair.

Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete up to forth stories building height all as specified and directed by Engineer-in-charge.

M&L for brick work with subclass B bricks, straight or curved on plan to any radius built in CM 1:6 all as specified

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water up to forth stories building height all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building with water proofing compound complete all as directed and specified.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on Bk surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed

M&L for preparation of new surface and applying two coat of distemper on wall/ceiling over with 3mm thick elastomeric wall care putty on walls complete all as specified and directed.

M&L for preparing surfaces of new plaster on walls and applying exterior two or more coats of APEX/WEATHER over 1.5mm putty including priming coat of exterior primer applied up to forth stories building height all as specified and directed by Engineer-in-charge.

M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper with 1.5 mm thick wall care putty on walls, including repairing of pot holes and cracks with putty, take it plaster where it required up to forth stories building height all as specified and directed by Engineer-in-charge.

M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty,complete all as specified and directed by Engr-in-Charge.

Material & Labour for prepration of old plastered or unplastered surfaces of walls and applying exterior two or more coats of APEX/WEATHER over 3mm putty including priming coat of exterior primer applied up to forth stories building height all as specified and directed by Engineer-in-charge.

M&L for prepation of old or new painted wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel Paint, up to forth stories building height all as specified and directed by Engineer-in-charge.

Preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint, up to forth stories building height all as specified and directed by Engineer-in-charge.

S&F in repairs bib taps, cast copper alloy, fancy type with crutchor butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore.

S&F in repairs angle valve ,stop valve, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore.

M&L in repair of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture, wall mixture and sink mixer etc complete all as specified .

S&F in repairs pillar tap, fancy type,cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe

S & F in repairs fancy type 15mm dia Brass CP wall mixer/basin hole mixer/sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed

S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with scews complete all as specified and directed by Engr-inCharge.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete.. Make : Neelkamal/Diamond/Nirali

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified.

S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. Make : Hindware/Parryware

S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)incl P or S trap etc all as specified.

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc and taking down existing flushing cistern complete all as specified and as directed by Engineer-in-Charge. Make : Cera/Parryware/Hindware

S&F of plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge.

S&F for PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors complete all as specified and directed by Engr In Charge.

.-ditto-. But 75 mm dia..

S&F for 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as percomplete all as complete all as specified and directed by Engr In Charge.

S&F for 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge.

S&F for PVC SWR bends 110 mm complete all as specified and directed by Engr In Charge.

S&F PVC SWR bends 75 mm complete all as specified and directed by Engr In Charge.

S & F in repair hand shower( health faucet ) with 1.0 m long tube and hook complete all as specified and directed.

S&F in repair 32mm bore PTMT waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

S&F for 15mm bore PVC connection 450mm long with brass nuts on both ends complete all as spd

S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.

S&F steel Grating doom 125 mm dia with waste hole or without hole complete all as specified and directed by EIC

S&F in repair 40mm bore PTMT sink waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement of PVC waste pipe 75mm long, 32/40 mm bore complete all as specified

S & F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed all as specified and as directed by Engineer-in-Charge.

S & F in repair PTMT stop cock 15mm dia pipe with screwed for iron pipe and fixed make - Polytuff /Paryag

Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge

M&L providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 in sunken portion including applying the under mentioned course of sunken treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (e) Including 10mm thick rendering with 1:4 using WPC. (f) Painting with two coats of water proofing paint with aluminium finish.

M&L Refilling Lime concrete with brick aggregate (Course) in lime mortar1:3, 300mm thick in the sunken with the help of proper tools & equipments & plants.

M&L Providing and making cement concrete in 40mm thickness in 1:2:4 type B0 (12.5mm graded aggregate) mixing Dr Fixit Pidiproof LW+ or equivalent Complete in sunken upto the below level of tiling complete all as specified and directed.

S & F in repairs 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified.

S & F in repairs CP paper holder of approved make complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs CP towel ring of approved make complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs CP Soap dish of complete all as specified and as directed by Engineer-in-Charge.

S & F repair corner glass shelf with bracket of complete all as specified and directed.

S & F repair front glass shelf with bracket of complete all as specified and directed.

S&F in repairs S/steel cloth hanging hooks set of six hooks complete all as specified and directed by Engineer-in-charge.

Dismantling stone slab and granite of any description or thickness in floors etc and removing the debries outside the MOD land up to forth stories building height all as specified and directed by Engineer-in-charge.

M&L green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars,plateform, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade to match the shade of marble stone including moulded ofnedges grinding and polishing complete all as specified and directed by Engr-in-Charge.

M&L green Marble work 18 to 20mm thick (table rubbed and polished) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) including dismentling complete all as specified and directed by Engr In Charge.

M&L Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 including dismentling complete all as specified and directed by Engr In Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not xceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) including dismentling complete all as specified and directed by Engr In Charge.

All as per above item no.66 but on vertical surface such as dado/skirting, including Rendering/backing 10mm thick in CM 1:4 on brick wall surfaces, other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed by Engineer-in-charge.

M&L Virified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 but not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor including vertical surface of wall such as skirting incl 10mm thick cement plaster (1:4) as in backing coat of tiles and dismentling complete all as specified and as directed by Engr-In-Charge.

All as per above item no.68 but on vertical surface such as dado/skirting, including Rendering/backing 10mm thick in CM 1:4 on brick wall surfaces, other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed by Engineer-in-charge.

M&L 100mm thik cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed by Engr In Charge.

M&L for Chequered cement concrete tiles (rubber moulded with gloshy finishing) with grey cemet and pigments 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with 15mm thick bedding layer of cement sand mortar (1:6) including dismentling complete all as specified and directed by Engr In Charge.

S&F precast machine pressed PCC interlocking paver block of 60 mm thickness, M-35 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved and rough to receive floor topping including dismentling complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation

M&L Machine pre polished cut kota stone slab 20 mm(+-2mm) thick in tread of steps,Plate form and similar over cement screed 20 mm thick in cm 1;4 base laid and jointed with grey slurry mixed with pigment to match the slab polishing as per up to four stories height and dismentling complete all as specified and directed by Engr In Charge.

.-Ditto-.but riser on stair case, skirting on walls etc incl the surface with . jointed with grey slurry mixed with pigment to match the slab including rubbing and polishing as per complete all as specified and directed by Engr In Charge.

M&L for exterior (out door) wall tiles 350mX250mmX7 to 8mm or 350X 450X 7mm to 8mm thick on vertical surface, jointed in neat cement slurry and pointed in white or colour cement to match with tiles incl back plaster 10 mm thick in cm 1:4 with WPC including dismentling complete all as specified and directed by Engr In Charge.

Demolition of cement concrete (unreinforced ) of any description and in any position not other wise specifically provided

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, path/hardstanding/subbase etc complete all as specified and directed by EIC.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each making good 1:4 CM complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5Sqm but not exc 4.00 Sqm each complete all as specified and as directed by Engineer-in-Charge.

S&F for size 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc., complete as specified,complete all as specified and directed by Engr In Charge.

S&F for size 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc. complete all as specified and directed by Engr In Charge.

M & L for cement concrete type C1, 1:3:6 (12.5 mm graded aggregate) in door and windows frames, any size, single or double rebated, including ar- rangement for fixing of hinges and fixtures as required complete all as specified and directed by Engr In Charge.

Taking down shutters of any description exc 1.0 sqm but nexc 2.0 sqm each complete all as specified and directed by Engr In Charge.

S&F for 35 mm thick II nd Class hardwood Glazed and skeleton shutters, open rebated and with prepared to receive wire cloth (gauze), etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr In Charge.

S & F 30 mm factory made plain framed, Flush shutters, solid core construction, with block board core and plywood face panels, commercial particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr In Charge.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed by Engr In Charge.

S&F Factory Made Solid PVC Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed by Engr In Charge.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F 150mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed complete and specified and directed by engr-in -charge.

S&F 150mm long aluminium handle cast type polished bright complete and specified and directed by engr-in -charge.

S&F 100 mm long butt hinges medium weight, stenless steel, and fixed complete and specified and directed by engr-in -charge.

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete and specified and as directed by engr-in -charge.

S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete and specified and as directed by engr-in -charge.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete and specified and as directed by engr-in -charge.

M &l for removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 15km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge.

Taking out of APP modified water proofing membrane including mud puska complete on roof surface and surface properly cleaned by wire brush complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (e) Including 10mm thick rendering with 1:4 using WPC. (f) Painting with two coats of water proofing paint with aluminium finish. (g) PCC 1:2:4 type B0 (using 12.5mm graded aggregate) roof kerbs, benching rounded or chamfered on edge including rounded or chamfered edges with necessary form work etc complete Note:- This treatement shall be done by the approved authorized applicators and guarantte of treatement shall be for 10 years.

M&L PCC 1:2:4 type B1 using 20mm graded aggregate mixed with water proofing compound as per manufacturer instructions laid as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement up to four stories complete all as specified.

M&L for cement contrete tiles 20cmX20CMX20MM thick wth grey cement and no pigment machine pressed; set jointed and pointed in neat cement slurry in floors and cut and polished including dismentling completed all as specified and directed by Engr-In-Charge.

M & L 20 mm thick screed bed or bedding layer of cement mortar (1:4), for laying of cement tiles on roof complete all as specified and directed by Engr In Charge.

M&L for removing rotational moulded polyethylene water storage tanks any size or shape or capacity hoisted and refixed in same position including necessary fittings with 20 mm dia Ball brass valves, high pressure, with polythene float and flynut including other fittings complete all as specified and directed by Engr In Charge.

Dismantling boarding, any description, fixed in any position, any thickness & any type, complete all as specified and directed by Engineer-in-charge.

S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F in repairs factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm complete as specified and as directed

M &L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge.

S & F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified.

S & F in repair 25 mm dia Stainless steel coated curtain rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket and eight nos rings per meter complete all as specified and directed by Engr In Charge.

Removing plant including roots by dismantaling of brick work PCC/RCC including necessary scaffoilding any type in any location/position i.e roof , parapet wall near pipes etc and applying acid after removing roots for preventing the regrowth and making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick plaster in CM 1:3 size of disturbed portion 150 x 150 x 200mm complete all as specified & directed by Engr - In - Charge.

M&L framed work of Fe-410W (Gde E-250) quality B as in doors or gates of angle or other section wwith gusset plate, rails, braces etc, complete drilled for fixing of steel sheeting or other covering, door etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of stee, sheeting or other coverings, running rails and guides) and hanging: also fastening and fixing and making good the disturbed surface with PCC 1:2:4 incld dismantling complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel, 1.00mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L in repair with welding work for Hinges, Handle or Framed/shutters work such as to MS Window/ventilators, MS doors etc (Area exc1.5 sqm n exce 4.5 sqm each), complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for Framed work such as grills, gratings,etc. with ends of bars shouldered and/or riveted, or forged into spikes, drain cover, framed guard bars, barred iron doors; ladders, framed balusters,walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate complete all as specified and directed by Engr In Charge.

Supply and fixing windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series), complete all as specified and direted by Engr-in-Charge. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per Note above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only. (iii) Including 2 coats of synthetic enamel paint over a coat of red oxide complete.

Demolition reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC Jali and similar suspended work (reinforcement cut as required to facilitate demolition) up to forth story Bldgs incl removingfrom site to out of defence land complete all as specified and directed by Engineer-in-Charge.

M&L Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggreate) in slabs supported on walls, beams and column in floors,roofs,landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-In-Charge.

M & L formwork to chullah hoods, chajjas, slab, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge.

S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified.

GIR RAJ BUILDERS

M/S MG GROUP

OMVIN ENTERPRISES LLP

Hindustan Co.Co

Ashish Sehgal and Co.

Mahesh Enterprises

SURESH KUMAR SHARMA & CO