Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 LAccepted-Finance R O VILLAGE KHOBLA P O NAND TEHSIL RAMSHEHAR DISTT SOLAN HP | L1 | Accepted-Finance Due to L1 Bidder | |
| 2 | L2₹12.2 L+₹55,358.43 (4.74%)Rejected-Finance NOT SPECIFIED | L2 | Rejected-Finance Due to L2 Bidder | |
| 3 | L3₹12.9 L+₹1.2 L (10.4%)Rejected-Finance | L3 | Rejected-Finance Due to L3 Bidder |
Tender Value
₹12.3 L
EMD Value
₹24,525
Closing Date
30 Sept 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Division nalagarh
.
2022_PWD_65404_1
NIT No. 8081-84 dated 15-09-2022
Open Tender
Civil Works
Item Rate
180 days
Nalagarh
4 documents required · 4 mandatory
₹500
₹24,525
13 Oct 2022
22 Sept 2022
30 Sept 2022
22 Sept 2022
30 Sept 2022
22 Sept 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Per square meter on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundation footing and basis of columns, etc. and mass concrete.
Columns, Pillars, Piers, Abutments, Posts and Struts
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Suspended floors, roofs, landings, balconies and access platform
Edges of slabs and breaks in floors and walls under 20 cm wide.
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc
1:4:8 (1 Cement : 4 coarse sand) : 8 gradedstone aggregate 40 mm nominal size) excluding cost of form work in foundation and plinth, as per H.P.PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location trough all modes of transportation in all leads lifts and all incidental charges .
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works above plinth level up to floor V level
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of Eaching of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars
1st class brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6(One cement: Six sand) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.
Half brick masonry with common burnt clay F.P.S. bricks of class designation 12.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :4 coarse sand)
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters
Providing and fixing Window and ventilators frames manufactured of channel section 75 x 40 (Seventy Five into Forty) millimeters for end frames and for center frame channel section 75 x 40 (Seventy Five into Forty) millimeters with Mild Steel flat (Seventy Five into Four) millimeters. in combination welded together to make one frame with making square steel section with Mild Steel flat of 20 x 4 (Twenty into Four)millimeters and 12 x 4 (Twelve into Four) millimeters., shutters of rolled steel section F-7B (Seven B) section including glass panes of 4 (Four) millimeters thick in glazed panel and wire gauge of designation 85 (Eighty Five)with 0.56 (Zero point Five Six) millimeters dia in wire gauge panel and fixed glazing fixed with angle and T section of 25 x 25 x 3 (Twenty Five into Twenty Five into Three) millimeters and flat of 12 x 4 (Twelve into Four) millimeters in sash bars duly welded of all corners and joints properly, hold fast of Mild Steel flat 200 x 50 x 5 (Two hundred into Fifty into Five) millimeters. duly welded at corner and joints of all steel section, embedded in cement concrete block 1:3:6 (One cement : three sand : six graded crushed stone aggrigate twenty milimeters nominal size of size 100 x 100 x 100 mm. size (One cement isto Three sand isto Six graded stone aggregate Twenty millimeters. nominal size of One hundred into One hundred into One hundred) including providing and fixing of fittings that is handles, tower bolts hooks and eyes and applying a coat of primer with red lead paint and fixed in position complete in all respect as per architectural drawing and direction of Engineer-in-Charge and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250 x 16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(a)250 x 10 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(b) 150x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :(a)125mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :(a)100 mm
Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding.
Kota stone slab floooring 20mm ( ave.) thick base of cement mortor 1:4 (1cement:4sand) laid over and jointed with grey cement slury mixed with pigment to match the shade of the slab including rubbing and poilshing complete. ( 25mm thick)
Kota stone slab 25mm thick in riser of step skirting , dado and pillars laid on 12mm ( ave) thick cement mortor 1:3 ( 1cement:3sand) and jointed with grey cement slury mixed with pigment to match the shade of slab including rubbing and polishing complete.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Per kilogram per Per square meter including pointing in white cement mixed with pigment of matching shade complete
Extra for pre finished Eaching to treads of steps of marble stone.
Providing and laying 40mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Plain Bend 87.5°1 10 mm diameter bend
Providing and fixing MS channel 75x40 mm frame for door, window, clerestry window frame welded with M.S. Flat 40 X12 mm in combination welded together to make one frame including hinges, jamb, lock jamb, beed and if required angle tharashold of mild steel angle 50 X 25mm welded or regidly fixed by mechanical means, lugs with split end tails to each jamb including joints miterd and welded with 16 X 3.15mm lugs 10cm long embedded in cement concrete block 15cm X 10cm X 10cm size of 1:3:6 (1cement :3 sand :6 graded crushed stone aggregate nominal size) with provision for locking arrangement and shock observor as specified including steel butt hinges 2.5mm and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. Steel work
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ for external plaster are for height upto 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top
12 mm cement plaster of mix on fair side of wall in CM1:6 (1 cement: 6 coarse sand)
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.1620 (20 mm OD pipe)
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge. 2025 (25 mm OD pipe))
Providing & fixing 100mm (hundred mm) dia PVC floor trap of self cleaning design i/c cutting and making good the walls and floors:-Floor Trap 110*90 millimeters.
Providing and fixing PVC soil, waste and ventilating pipes and jointing complete (i)75 mm (one hundred millimeter) nominal bore
Providing and fixing PVC soil, waste and ventilating pipes and jointing complete (ii) 110 mm (one hundred fifty mm) nominal bore
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete(ii)75 mm (one hundred millimeter) nominal bore
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete((iii) 110 mm (one hundred fifty mm) nominal bore
Providing and fixing PVCcowl 110 mm dia.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P.brass pillar tap
Providing and fixing 100 mm ( One hundred millimeters) sand cast Iron grating for gully trap including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
Providing and fixing CP brass toilet paper holders including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge
Providing and fixing C.P. brass long Eache bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore
Providing and fixing uplasticised 15 mm ( Fifteen millimetrs) nominal bore 45 cm ( Forty five centimeters) length PVC connection pipe with brass unions as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.4(5 cm length , 15mm nominal bore)
Providing and fixing fullway brass valve with wheel 15 (fifteen) millimeters nominal bore , as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads, lifts and all incidental charges.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin:32 mm dia
Constructing masonry Chamber 60x60x75 cm ( sixty into sixty into seventy five centimeter) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm ( One hundred millimeter) top diameter, 160 mm ( One hundred sixty millimeters) bottom diameter and 180 mm ( One hundred eighty millimeters) deep ( inside) with chained lid and RCC top slab 1:2:4 mix ( one cement: two sand: four graded stone aggregate 20mm ( twenty millimeter)(nominal size), i/c necessary excavation, foundation concrete 1:5:10 (one cement : five sand: ten graded stone aggregate 40 mm ( Forty millimeter) nominal size) and inside plastering with cement mortar 1:3 (One cement : three coarse sand) 12 mm (Twelve millimeters) thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
Providing and fixing PVC waste and ventlating pipes including filling the joints with approved adhesive complete as per HP.PWD.specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges . 110 mm diameter pipe
JITENDER KUMAR
Pooja Kumari
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .