SPL REPAIR TO BLDG NO T-71 (OFFRS WARD-I) AND T-10 (OFFRS WARD-II) AND NEAR MED VII AT BASE HOSPITAL UNDER GE (E/M) BASE HOSP, DELHI CANTT-10

Amount

Dismantling of floor , hearth or wall tiling including cement mortar bedding (but not backing,) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 600 x 300 x 7mm thick on vertical surfaces of wall fixed to neat cement slurry and pointed in white or coloured cement to match over cement plaster 10mm thick in Cement Mortar 1:4 complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC type D-2, 1:4:8, ( 40 mm graded stone agg ) as in sub base, floor,filling and mass concrete complete all as specified and as directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6, ( 40 mm graded stone agg ) as in path/plinth protection and finishing the surface even and smooth with using extra cement complete all as specified and as directed.

Taking down chowkats or frame exceeding 1.5 sqm but n.exc 4.00 sqm. (without taking of shutter from the frame including plastering of demolished surface with Cement Mortar 1:4 for fixing of door shutter complete all as specified and directed.

Taking down chowkats or frames n. exc 1.5 sqm each but with shutters without taking off shutters from the frame) including plastering of demolished surface with Cement Mortar 1:4 for fixing of window complete all as specified and directed.

Taking down steel ventilator with frames & shutter n.exc 1.5 sqm each including plastering of taking down surface in Cement Mortar 1:4 for fixing of Aluminium ventilator complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm any colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing as per SSR Pt-II 2010 complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of any colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F butt hinges medium weight cold rolled Stainless steel, size 100 mm complete all as specified and directed.

S&F 200mm long aluminium barrel tower bolt and fixed complete all as specified and directed.

S&F 150mm long aluminium handle cast type anodised complete all as specified and directed.

S&F powder coated anodised aluminium frame,shutters,and other complete sections,cleats for partitions, doors, windows and ventilators with one or more rebates, including jointing cleat for fixing etc complete all as specified and as directed. The frame and shutter will be made out of the following sections:- (a) Aluminium anodised door frame 101.60mmx44.45x2.50mm fixed with aluminium trust bolt in walls by drilling as directed. (b) Aluminium anodised side rail of shutter section 85mmx44.5mmx2mm (c) Aluminium anodised top rail of shutter section 114.30mmx24.4mmx2.15mm (d) Aluminium anodised middle rail of shutter section 83.5mmx44.5mmx2.11mm (e) Aluminium anodised bottom rail of shutter section 150mmx25.4mmx2.20mm. (f) Ventilator frame size section will be 63.0mmx38.10mmx1.5mm

S&F 12 mm thick prelaminated both sides decorative particle board exterior grade decorative choice lamination fixed with stainless screws to aluminium frame complete all as specified and directed.

S&F 5.5mm thick frosted glass and each glass pane exc. 0.50 sqm and fitted to aluminium frame with rubber/neoprene felt and clips complete all as specified and as directed

S&F powder coated Aluminium grill 8 to 10mm thick fixed with separate channel to window/ventilator complete all as specified and directed

S&F stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm with flat Aluminium glazing clips of size 38x3mm to aluminium frame complete all as specified and directed

S&F butt hinges medium weight cold rolled Stainless steel, size 125 mm complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of unframed timber scantling 40 sq cm and over in section, in any position complete all as specified and directed.

S&F steel tubular trusses, purlins, rafter vertical post and similar works including special shaped washer etc. complete using ERW or induction butt welded tubes including cleats, plates and including painting the steel conforming to IS 1161-1998 Gde st-240 complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete complete all as specifed & directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall, ceiling boards (Wooden board etc) or insulation boards/slabs/composite panel/PVC ceiling any thickness including cover fillets complete complete all as specifed & directed.

M& L for GI anodised snap grid ceiling made of Tee and angle of size 24.5 x 24.5 x1.50 mm thick, size of grid 605 x 605 mm with GI wire suspender 2 to 3 mm dia fixed with wooden/steel truss/rafter flat or slope including taking down old ceiling complete all as specified and directed.

M&L for 12 mm thick Armstrong ceiling of size 600 x 600 mm, fixed to GI snap grid ceiling flat or slope complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in coping of Manholes, drains, RCC jallies, Sides of paver blocks,sides of chequered tiles, window cills,steps,bands, plinth courses,bed blocks,precast lintel upto 1.5 clear span etc complete all as specified and as directed.

M&L MS bar 10mm dia TMT & over deformed & twisted bars cut to length ,bent to shape required including cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Item no 32 above but 8mm dia as in stirrups complete all as specified and directed.

M&L RCC type B1 1:2:4 (20 mm graded stone aggregate (nominal mix) in, lintel, beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

M&L RCC 1:2:4 type B1( using 20 mm graded stone agg ) as in precast cover slab fixed in position and set in Cement Mortar 1:4 including necessary form work complete all as specified and directed.

M&L RCC type B1 1:2:4 (20 mm graded stone aggregate (nominal mix) as in slabs supported on walls, beams, coloumns in floor, roofs, landings, balconies etc complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar, in any position and removing rubbish to outside the MOD land complete all as specified and directed.

M&L Bricks work with sub class 'B' bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed

All as per Item No 38 above except bricks complete all as specified and directed.

M&L Bricks work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

Taking down cement plaster on brick or stone wall etc including racking out joint, hacking for key, scrubbing down with water etc.complete all as specified and directed

M&L rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M& L for 15mm thick rendering in Cement Mortar 1:4 on fair/unfair surfaces finished even and smooth without using extra cement mixed with 3% water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid separately under respectively item of this schedule.

M&L for 10mm thick cement plaster in cement mortar 1:3 on fair face of concrete ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M & L for preparing the newly plastered wall surface then applying 1mm thick wall care putty preparing a levelled surface followed by by two coats of Oil bound distemper of any tint on ceiling complete all as specified and directed.

M & L for complete removal of existing treatment from old decorated ceiling surface by scrapping with electric regmal machine/hand scrapper then applying 1mm thick wall care putty followed by two coats of Oil bound distemper over one coat of primer of any tint on ceiling complete all as specified and directed.

M & L for preparing the old/new RCC jalli surface then applying two coats of Oil bound distemper of any tint on walls over one coat of primer complete all as specified and directed.

M & L for preparing the newly plastered wall surface then applying1mm thick wall care putty preparing a levelled surface followed by by two coats of Oil bound distemper over one coat of primer of any tint on ceiling complete all as specified and directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping with electric regmal machine/hand scrapper then applying 1mm thick wall care putty followed by two coats of Oil bound distemper over one coat of primer of any tint on walls complete all as specified and directed.

M & L for preparing the newly plastered wall surface and applying two coats of Apex ultima paint over one coat of primer over one mm thick wall care putty complete all as specified and directed.

M&L providing 35mm Precast cement reinforced concrete louvers and jallies type B0 1:2:4 using 12.5mm graded stone aggreagate (measured solid) including all mouldings but excluding frame & set in Cement Mortar 1:4 including taking down old one removing demolished material to a distance exc 500 mtr and not exceeding 1.50Km and depositing where directed complete all as specified and directed.

Dismantling water tanks of capacity exc 500 ltrs but nexc 1000 ltrs and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindriacal vertical with closed top) hoisted and fixed in position all as specified in SSR part-I of capacity 1000 ltrs complete all as specified and directed.

Taking down steel tubing and connections, including cleaning for re-fixing or removal of store, 15 mm bore pipe complete all as specified and directed.

S&F in laying 16mm outer dia dia CPVC pipes SDR 11 and plain CPVC 11 fittings on wall, under wall(concealed) / ceiling or laying in floors completed all as specified and as directed.

Taking down steel tubing and connections, incl cleaning for re-fixing or removal of store, 20 mm bore pipe complete all as specified and directed.

S&F in laying 20mm outer dia dia CPVC pipes SDR 11 and plain CPVC 11 fittings on wall, under wall(concealed) / ceiling or laying in floors completed all as specified and as directed.

S&F in repair 15 mm bore CP brass centre hole basin mixer without pupup waste system with 450mm long braided hoses, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: Jaguar Cat Part No CQT23167B or equivalent in GEM/ MARC

S&F in repairs 15mm CP brass wall mixer with L bend(provn of OH shower) mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. Make: Jaguar Cat Part No CQT23273UPR oe equivalent in GEM/ MARC

S&F in repair of brass CP bib cock in Fancy type long body 15mm dia with flange complete all as specified and directed. Make: Jaguar Cat Part No FUS 29037 or equivalent in GEM/ MARC

S&F in repair 15 mm dia Stop valves/angle cock, fancy type, brass chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed. Make: Jaguar Cat part No FUS 29053 or equivalent in GEM/ MARC

S&F in replacment of 2 in-1 brass CP angle cock 15mm (with flange) complete all as specified and as directed. Make: Hindware Cat Part No F330006 or equivalent in Parryware/ Cera/ Somany/ Jaguar

S&F in repair PVC connection 15mm dia, 600mm long with PTMT nuts on both ends fixed in repairs complete all as specified and directed.

S&F in repair PVC connection 15mm dia, 900mm long with PTMT nuts on both ends fixed in repairs complete all as specified and directed.

S&F in repairs PVC flush pipe 32 mm dia for low level flushing cistern complete all as specified and directed.

S&F in repairs PVC corrugated waste pipe for WHB of 32x800mm bore complete all as specified and directed.

S&F in repairs PVC corrugated waste pipe for urinal of 32x800mm bore complete all as specified and directed.

S&F in repair 15 mm dia chromium plated shower rose min 125 mm size complete all as specified and directed. Make: Hindware Cat Part No F160079 or equivalent in Parryware/ Cera/ Somany/ Jaguar

S&F in repairs chromium plated15 mm dia Health Faucet with 1.5 mtr tube & hook complete all as specified and directed. Make: Jaguar Cat Part No ALD CHR-565 or equivalent in GEM/ MARC

S&F in repairs 15mm dia chromium plated jet sprey (Butterfly) for EWC including 1.50 mtr flexible tube complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make: Jaguar Cat Part No AKP-35781P or equivalent in GEM/ MARC

S&F in repairs 15 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min wt 20mm - 210Gm) complete all as specified and directed.

S&F in repair flat slotted grating with frame 150mmx150mm square grap with hinge with or with out hole and fixed on floor/Nahani trap with Cement Mortar 1:2 complete all as specified and directed.

S&F in repairs stainless steel soap dish size 150x100mm complete all as specified and as directed

Supply and fixing in repairs Vitreous china Urinal,half stall size 530mmx340mmx360mm white coloured (excluding flushing cistern, flush pipe) but including Connection tubes with brass nut 600mm long with spreader complete all as specified and directed. Make: Hindware URS-WHT-0707 or equivalent in Parryware/ Cera/ Jaguar/ Somany

Supply and fixing in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.

S & F in repairs Vitreous China one piece EWC S concealed size 755mmx365mmx655mm wash down water closet pan pedestal pattern white colour with integrated cistern, soft seat cover and twin flush fittings including fixing bolts , complete all as specifiedand directed. Make: Jaguar Cat Part No LYS-WHT-0204BP and seat cover Cat Part No ZPS-WHT-1027UF or equivalent in Hindware/ Parryware/ Cera/ Somany

S & F in repairs Vitreous China under counter white colour wash hand basin size 560mmx410mmx180mm, rest on granite base including CP waste coupling, PVC waste pipe,PVC connector x2 Nos including PVC waste pipe complete all as specified and fixed in wall by required SS fixing bolts angle& GI pipe or finishing with white cement complete all as specifiedand as directed. Note: including cutting of granite acccording shape of wash basin and fix the wash basin in granite very effective way

S & F Vitreous China wash down water closet pan (pedstal pattern) white (squatting pan & trap including connection to drain) or out going pipe and to flushing pipe anti syphonic pipe etc and fixed in repairs complete all as specified and directed.

S & F Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) complete including provision of lime concrete complete all as specified and directed.

S & F in repair soft close water closet seat cover, white colour complete all as specified and as directed.

S&F in repair CP towel rail of size 600 mm long between flanges compete all as specified and directed. Make: Jaguar Cat Part No AQN7711 or equivalent in GEM/ MARC

S&F in repair corner glass shelf 300 x600mm with ABS brackets complete all as specified and directed. Make: Jaguar Cat Part No ACN1173 or equivalent in GEM/ MARC

S&F CP peg set six complete all as specified and directed. PRAYAG Cat No BEA 30

Dismantling of CI pipe joints in cement and taking out in trenches in for or wall of internal dia 100mm/75mm complete all as specified and directed.

S&F in repair 100 mm bore CI 'P' or 'S' trap fixed in position complete all as specified and directed.

S&F in repairs CI Nahani trap suitable for 75 mm dia outlet and jointing to waste pipe in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repairs 100mm CI sanitary connections socket to fit WC out let complete all as specified and directed.

S&F in repairs 100mm CI Spun pipes waste and vent pipes, in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm CI spun pipes waste and vent pipes, in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm CI spun pipes waste and vent pipes, in any length with or without ears fixed in walls complete all as specified and directed.

S&F in repair 100mm CI bends/Tee diminishing pieces or tapers complete all as specified and directed.

S&F in repair 75mm CI bends/Tee diminishing pieces or tapers complete all as specified and directed.

S&F in repair 75 mm CI cowls complete all as specified and directed.

S&F CI reducer 100mmx100mmx75mm reducer Tee for fixing of 75mm CI pipe for fixing of CI cowl complete all as specified and directed.

S & F Wall mounted inverted 'L' shaped grab bar 500 x 700 mm and fixed in position complete all as specified and directed. Make: Cera Cat Part No 2503 or equivalent in Hindware/ Parryware/ Somany/ Jaguar

S & F Wall mounted corner grab bar 500 x 600 mm and fixed in position complete all as specified and directed. Make: Cera Cat Part No 2504 or equivalent in Hindware/ Parryware/ Somany/ Jaguar

S & F Wall mounted grab bar 300 mm and fixed in position complete all as specified and directed. Make: Cera Cat Part No 2505 or equivalent in Hindware/ Parryware/ Somany/ Jaguar

Demolition and breaking up salt glazed drain pipes 150 mm dia set in cement mortar complete all as specified and as directed.

M&L Plain cement concrete 1:3:6 type C-2 as in 150mm dia concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L150 mm dia(internal dia) RCC pipes NP2 laid in trenches and jointed complete with collars complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes etc n.exc 10 Sqm on plan in depth and getting out in any type of soil complete all as and not exc 1.5 mtr in depth complete all as specified and directed.

All as per Item No 106 above but exc. 1.5m deep and n.exc 3 mtr deep complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25 cm with any type of soil complete all as specified and as directed.

Removal of excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC type C2 1:3:6 (using 40mm graded stone aggregate) as in surface channel and drain complete all as specified.

M&L for removing demolished material to a distance exc 500 mtr and not exceeding 1.50Km and depositing where directed complete all as specified and as directed.

S&F CP Towel rack complete all as specified and directed. Make: Jaguar cat Part No ACN1181NHN or equivalent in GEM/ MARC

S&F in repair 15 mm dia concealed Stop valves, fancy type, brass chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed. Make: Jaguar Cat Part No ALD 089 or equivalent in GEM/ MARC

S&F 200mm long aluminium anodised powder coated decorative handle complete all as specified and directed,

S&F 300mm length aluminium alloy, anodised, powder coated sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc to be measured separately) and making good disturbed surfaces of wall floor etc complete all as specified and directed.

Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed.

M&L point wiring for modular switches or normal switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed cable 1100 Volts grade, drawn through concealed / Suraface rigid non-metalicPVC Conduit as requirement of site including cadmium plated screws as per ISS, including replacement of 3 mm thick phenolic laminated sheet top covers on and including sunk type CI/steel terminal boxes concealed in wall suitable for modular/normal switch-socket including 1.5 Sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light point controlled by one switch 5 Amps one way single pole complete all as specified and directed.

All as per item No. 116 above but one three pin 5 Amps socket out let on same board complete all as specified and directed.

All as per item No. 116 above but point wiring of copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 1.5 Sqmm size of earth conductor complete all as specified and directed.

S & F Ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and directed.

S&F in repair switch piano , flush button type , single pole , one way 5 Amps complete all as specified and directed.

S&F in repair switch piano , flush button type , single pole , one way 15 amps complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin, 5 Amp, flush type complete all as specified and directed.

M&L for sub main wiring with 2 runs of 4 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit medium grade as per ISS and one run of 4 sqmm size PVC insulated copper conductor complete all as specified and directed. Note. Two run of cable and earth conductor shall be measured as one length.

M&L for sub main wiring with 2 runs of 6 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit medium grade as per ISS and one run of 6 sqmm size PVC insulated copper conductor complete all as specified and directed. Note. Two run of cable and earth conductor shall be measured as one length.

S & F in replacement for existing 36/40 Watt tube light fiiting by energy efficient LED light fitting 20 Watt,230 Volt of 1200 mm + 50 mm length along with fixture, heat sink, environmental friendly, energy efficient, wall mounted batten integrated electronic driver complete all as specified and directed.

S&F in repair Bldg security light fitting LED 45 Watt cast aluminium housing, toughened glass,silicon gaskect, high power LED with lens for uniform istribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. Make - Havells Cat pt no- ENDURAPEARLNEOSL45WLED757SASYTOPC or equivalent in Philips/ Bajaj/ Crompton Greaves/ C&S Electric/ Halonix

S & F in replacement for existing 18/20 Watt tube light fiiting by energy efficient LED light fitting 10 Watt,230 Volt of 600 mm + 60 mm length 6000 K colour temp ,decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient, wall mounted batten integrated electronic driver complete all as specified and directed.

S & F in repair for distribution board, SPN, 4 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in repair for distribution board, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F in repair for distribution board, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F Water heater geyser of capacity 25 Ltr AC Single Phase 240 Volts, 2 KW with all assessories such as copper tank, assembly, element including plumbing works, elect connection ,geyser mounting , incl hot and cold water duty free pvc pipes of size 15mm bore and 60cm long for connection and inlet and outlet pipe line connection , inside the existing wall and making good disturbed surfaces complete all as specified and directed by engineer in charge. Note :- Old unserveciable item will be deposited to MES store yard.

S & F Water heater geyser of capacity 50 Ltr AC Single Phase 240 Volts, 2 KW including plumbing works,hot and cold piping, elect connection ,geyser mounting on wall properly with fasteners, nut, bolts etc. complete all as specified and directed. Note :- Old unserveciable item will be deposited to MES store yard.

S& F exhaust fan 300 mm dia sweep, 900 RPM, 240 Volt heavy duty exhaust fan with louver shutter and brackets, connection with flexible PVC copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and directed. Note :- Old unserveciable exhaust fan will be deposited to MES store yard.

S & F in repair MCB SPN, 240 Volts, 32-63 Amps complete all as specified and directed.

S & F in repair MCB SP, 240 Volts, 6-40 Amps complete all as specified and directed.

Supply and fix in repair single pole and neutral enclouser with a two pin and earth plug and socket complete with one double pole MCB 20 Amps complete all as specified and directed.

M&L in repair for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion complete all as specified and directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth strip connected to test point max 7 mtr as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 40 mm dia for supporting of earth strip/wire.

Supply, laying and testing cable in repair for XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core to be layed/fix on ground,wall with all necessary accesories all as specified and directed by Engr- in -charge.

Excavation in trenches not exc. 1.5m wide and not exc 1.5 m deep in any type of soil for laying/taking up/taking down of cables and getting out and levelling of bottom surface to required level all as specified and directed by Engineer-in-Charge.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified and directed.

S &L sub class B bricks having minimum compressive strength 75 Kg/Sqcm laid in trenches for cable protection etc complete all as specified and directed by Engineer -in-Charge.

Returning filling in, including spreading, leveling, watering and well ramming soils in layers not exceeding 25 cm thick complete all as specified and directed.

M/S Yamin

M/S Rohit Enterprises