ADDITION/ ALTERATION AND SPECIAL REPAIRS TO SAILORS MARRIED ACCOMODATION BUILDING AT INS HAMLA UNDER GE (NW) BHANDUP

Amount

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris out side MD land. Complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:3 on fair faces of concrete surfaces of ceiling on plastered ceiling surfaces; surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L 15mm thick plastering in CM 1:6, on fair faces of brick work or concrete surfaces and provn of 3mm thick wall care putty on plastered surfaces of wall; surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M & L for 20mm (15+5) thick rendering in Cm 1:4 using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth with out using extra cement complete all as specified & directed. Note: Water proofing compound shall be measured & paid seperately.

Supply only integral water proofing compound. Complete all as specified and directed.

Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land. Complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6) complete all as specified and directed.

M &L PCC 1:3:6 type C2 75mm thick as in plinth protection finished even and smooth using extra cement compete all as specified and directed.

Taking down chowkats without taking off shutters from the frame area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats without taking off shutters from the frame exc.1.50 Sqm and not exc. 4.00 Sqm. Complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm n exc 2.00 sqm. Complete all as specified and directed.

S&F IInd class hard wood plain solid straight chowkats and framed rebated on the solid rounded put togeather with glue pinned at joints. Complete all as specified and directed.

S&F 2nd class hard wood 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial or 12mm veneered particle board with commercial veneer on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated. Complete all as specified and directed.

M&L Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding. Complete all as specifed and directed.

S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and pepared to receive glass, gauze, etc with sash bar, edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauze etc sizes of members of shutters as specified in SSR part-1 section 8, clause 8.24 (a); all as specified. ISI marked. Complete all as specified and directed.

M&L painting with synthetic enamel paint of two coats over a coat of primer on new wooden surfaces of any description exc. 10 Cm width or girth including prepation of surfaces. Complete all as specified and directed.

M&L applying one coats of synthetic enamel paint on old wooden surfacesof any description exc. 10cm width or girth incl. preparation of surfaces. Complete all as specified and directed.

M&L for MS hold fasts size 25x6mm FI fixed to chowkats. complete all as specified and directed.

Providing PCC 1:2:4 type B1 cement concrete in bed blocks for hold fasts. Complete all as specified and directed.

S&F stainless steel butt hinges heavy weight 100mm long. Complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long. Complete all as specified and directed.

S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm. Complete all as specified and directed.

M&L extruded aluminium alloy handles, fabricated type, anodised 150mm size.Complete all as specified and directed.

Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete. Complete all as specified and directed.

M&L for 20 to 25 mm machine cut kota stone slab in single piece with round nosing with three numbers of serration as in treads of steps for staircase laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of of the slab including rubbing and mirror polishing and including over 15mm thick screed bed or bedding layer in CM1:4 complete all as specified and as directed by EIC

M&L for 20 to 25mm machine cut kota stone slab as in riser of steps, skirting, dado and pillar, cills and jambs laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishand including over 15mm thick screed bed or bedding layer in CM1:4. Complete all as specified and as directed by EIC

S&F for anodized aluminium section in frame or shutters of window , doors and partition with aluminium section ( medium weight) of suitable size as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plasted steel screws and all necessary fitting, screw, plug for fixing screws locking arrangement etc Complete all as specified and directed. Note:- The rate of glass pane, wire mesh will be measured and paid separately.

S&F anodised aluminium grill DG- 102 ( 10 mm x 5.2mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1mm thick of approved make. Complete all as specified and directed.

S&F solid PVC door frame(choukhat) of size 50mmx47mm made out of 5mm plain dark colour PVC sheet reinforced with MS square tube etc. Complete all as specid and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top& bottom rails. MS frame shall be covered with heat moulded plain dark colour PVC 'C 'Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain dark colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail& bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and joined together with solvent cement, etc fixed to frame complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor of 140mm size. Complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltrs capacity high/low level with inlet, ball valve, float and handle including brackets. Complete all as specified and directed.

M&L for providing stages wise waterproofing treatment to sunken portion of toilets as under:- Stage 1: Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debries outside MD land etc complete all as specified and directed. Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions. Note:- Rate inclusive of waterproofing compound. Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions. Stage 5: Laying 50 GSM fyber glass cloth over the 1st coat while the coated surface is still tacky Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /Sqm Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions. Note:- Rate inclusive of waterproofing compound.

M&L for cement concrete Type E2 1:5:10 using 40 mm graded aggregate as in lean concrete. Complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white complete including seat cover and connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specified and directed.

M&L PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed.

M&L WC connector 110 mm PVC SWR for WC complete all as specified and directed.

Supply only PVC connector 15mm size with PTMT nuts of length 450mm. Complete all as specified and directed.

M&L Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 100 mm dia of outlet. Complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or labouratory with plugs, washers, and wastes. including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and directed.

M&L Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.

Supply only pillar tap 15 mm diacast copper alloy chromium plated fancy type complete all as specified and directed. .

M&L waste fitting of 32 mm bore, brass, chromium plated for glazed ware wash basin etc

M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 40 mm dia complete all as specified and directed.

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

S&F in repairs brass chromium plated towel rail 20mm dia, "D" type, 600mm long between flanges.

S&F stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed by Engineer-in-Charge.

M&L Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed.

M&L Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed.

All as per item No 53 above, but 25mm bore of pipe complete all as specified and directed.

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia. complete all as specified and directed.

All as per item No 55 above, but 25mm bore dia complete all as specified and directed.

S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 25 mm in repairs complete all as specified and directed.

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 2000 ltrs capacity complete all as specified and directed..

M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete .25mm dia complete all as specified and directed.

M&L Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed

S&F in repairs 40 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed. Complete all as specified & directed.

S&F in repairs 25 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

Material and Labour non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not excceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. Complete all as specified and directed

M&L glazed ceramic jointless coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3. Complete all as specified and directed.

M&L Non - skid coloured joint free Ceramic tiles of size 600mm x 600mm x 10 mm thick in floors over and including 20 mm thick screed bed in cement mortar 1:4 etc. set and jointed in neat cement slurry and grouted with epoxy grout to match (Note: Cost of 20 mm thick screed bed is included in the rate).

All as per item No 66 but in vertical surfaces as in skirting etc complete over and including 10 mm cement plaster in cement mortar 1:4 complete all as specified and as directed (Note: The rate includes the cost of cement plaster)

Taking down 100 mm cast iron soil waste pipe moulding all fittings heads, shoes, bends etc. (Measured over all as fixed along the confrce line over fittings and accessories).

S&F 100mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required complete all as specified and directed.

S&F 100mm dia CI bends including cutting of holes complete all as specified and directed.

S&F 100mm dia CI branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches and cutting of holes with cement joints complete all as specified and directed.

S&F CI cowl 100mm dia complete all as specified and directed.

S&F 20mm dia aluminium alloy curtain rail fixing with pair of brackets, stops, rollers etc complete all as specified and directed.

M&L for leakage / seepage proof coating consisting of preparing the new surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.

M&L for leakage / seepage proof coating consisting of preparing the old surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.

M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer finish.etc complete all as specified and directed .

M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper over a coat of primer finish.etc complete all as specified and directed .

M & L for preparation of new plastered surfaces on ceilings and applying two coats of oil bound distemper with roller over complete all as specified and directed.

M&L for complete removal of existing surfaces on ceiling and applying two coats of oil bound distemper with roller over application of putty complete all as specified and directed.

Taking down AC rain water pipe any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store. Complete all as specified and directed.

M&L for 110mm dia PVC rain water pipe single socketed (ISI marked) fixed fixed to wall with mild steel clamps including complete fittings such as heads, bends, shoes, swan necks etc. Complete all as specified and directed.

Dismantling of boarding ,any description and in any position complete all as specified and directed

M&L for 18/19mm thick prelaminated particle board with teak wood beading, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for 2nd class hardwood moulding n. exc 6 sqcm as in cornices, picture rails and the like such as in prelaminated particle board complete all as specified and directed.

S&F 30mm width of flange continous (piano) hinges, mild steel, bright finish or electro-galvanised complete all as specified and directed.

S&F 75mm size hasp & staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Chipping, removing, carefully concrete including loose palster by low impact Hammer without damaging the structure and cleaning and disposal of debris out side the premises including necessary form work ie providing & erecting steel props, safety nets, dust control net, Self supported two legged B class tubular steel scaffolding , 4mm thick ply covering to machineries / other utilities etc complete all as specified and directed.

Cleaning the existing reinforcement with wire / rotary wire brush, making the surfaces free from loose material dirt etc, complete. Applying two coats of alkaline rust converting primer conforming to ASTM-B- 117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1 hour between the coats.

Providing and fixing additional steel bar in various structural elements like column, beams and slab etc including drilling, bending and fixing the bars tying with preleft binding wires etc complete anchoring reinforcement bar in existing RCC member in holes of minimum 10d depth for 8 to 12mm dia bars complete all as specified and directed.

M&L for carrying out application of 'Bi-polar migratory corrosion inhibitor' EPCO-KP-100 on concrete surface. This inhibitor has migratory kind of propertyh which permits the material to migrate to a virtual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attach anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete.

M&L for applying Anticorrosive Treatment to Reinforcement by IPNET RB. Application of two coats of IPNET RB on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be by brush complete all as specified and directed.

Providing and applying structural grade epoxy-latex bond coat pririor to application of any type of mortar conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application complete all as specified & directed.

Providing, casting & repairing of excessively damaged members with Micro-concrete at all levels with all leads & lift or as directed including formwotk, centering, scaffolding & mixing, laying, levelling and finishing including curing etc complete ( for thickness more than 40mm) all as specified and directed.

Building up the profile of structual members by using polymer modified mortar upto 20mm thickness including levelling profilling etc complete all as specified and directed.Make:- Molith PMM of Krishna conchem or equivalent. Note:- Mode of measurement: Superficial area of concrete will be measured.

Building up the profile of structual members by using polymer modified mortar upto 40mm thickness including levelling profilling etc complete all as specified and directed. Make:- Molith PMM of Krishna conchem or equivalent. Note:- Mode of measurement : Superficial area of concrete will be measured.

Demolition of the existing brick coba treatment over roof slab completely including throughly cleaning complete all as specified and Removal of the demolished material to outside MD land.

M&L for PCC 1:2:4 Type B0 (using 12.5 mm graded aggregate) with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed. Note:- Rate inclusive of waterproofing compound.

M&L APP modified membrane roof treatment to roof and parapet wall surface to the following specification:- (a) Applying oil bound bitumen primer @0.40 lit / Sqm of density 0.87 - 0.89 Kg/lit of 25 0 C after preparation of surface. (b) Supply and lay APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10cm and 15cm end lap weighing not less than 3.6 kg/sqm. (c) Applying one coat of solar reflective bituminous paint all as per manufactures's instruction complete all as specified and as directed.

M&L for post construction anti- termite traetment along the external wall below concreate or masonary apron using chemical emulsion @2.25 liters per linear meter including drilling and plugging holes with cement morter 1:2 to match the existng floor etc complete all as specified and directed.

M & L for post construction anti - termit treatment at points of contract of wood work using chemical emulision (in oil or kerosin based solution ) @ 0.5 liters per hole by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm centere to center and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. Complete all as specified and directed

M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for Two coat of synthetic enamel paint over a coat of aluminium red oxide primer to old steel surface including preparation complete all as specified and directed.

Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed.

Taking down main switches from DBs with sheet metal enclosure 08/04 way SPN/TPN DBs etc all as specified and directed.

M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan point controlled by one one way switch. Complete all as specified and directed.

All as per item No 106 above but for one 5 pin socket 5 Amps on same board complete all as specified and directed

All as per item No 106 above but for one 5 pin socket outlet 05 Amp independent board complete all as specified and directed

All as per item No 106 above but for one bell point controlled by 5 Amps bell Push. Complete all as specified and directed.

M & L for point wiring complete with proper colour coding using 1100 volts grade, 2.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc. also inclduifng 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one 5 Pin, 6/16Amps, Socket outlet independent,complete all as specified and directed

Supply and fix in replacement of call bell AC, 230 Volts single pole all as specified and directed.

Supply & fixing ceiling rose , surface bakelite 3 terminal complete all as specified and directed.

Supply & fixing modular fan regulator,120W- 2 module complete all as specified and directed.

Supply & fixing switch modular type 6 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing switch modular Bell push 6 Amp single pole two way 230V complete all as specified and directed.

Supply & fixing switch modular type 16 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing socket modular type 6 Amp 2/3 pin single pole one way 230 V complete all as specified & directed.

Supply & fixing socket modular type 16 Amp 2/3 pin single pole one way 230 V complete all as specified & directed.

Supply & fixing Modular white cover plate with frame 8 Module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 3 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 8 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 3 Module complete all as specified & directed.

S&F LED Batten T-5 ,integrated sleek extruded LED channel with acrylic cover, with and including 20 Watt light and driver, prewired, provision of 0.5 Sqmm 3 core flexible copper conductor wire for connecting from ceiling rose, complete all as specified and directed. LED batten must have technical specification specified below: - 20 W Wattage, Rated input voltage-140 V AC-270 V AC, Driver efficiency-88%, Lumens Efficiency-100lm/w, starting voltage 90V and THD <=20 Colour Rendering index (CRI) >80, Colour Temperature-6500K, Cool daylight Light Effect, No harmful radiations, In built surge protection-2.5 kV, Isolation-3.75 kV and Zero mercury content.

S&F LED Batten ,integrated sleek extruded LED channel with acrylic cover, with and including 10 Watt light and driver, prewired, provision of 0.5 Sqmm 3 core flexible copper conductor wire for connecting from ceiling rose, complete all as specified and directed. LED batten must have technical specification specified below: - 10 W Wattage, Rated input voltage-140 V AC-270 V AC, Driver efficiency-88%, Lumens Efficiency-100lm/w, starting voltage 90V and THD <=20 Colour Rendering index (CRI) >80, Colour Temperature-6500K, Cool daylight Light Effect, No harmful radiations, In built surge protection-2.5 kV, Isolation-3.75 kV and Zero mercury content.

Supply and fix in repairs exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. Note : Old exhaust fan should handover to MES store yard (for kitchen).

Taking down of existing ceiling fans, opening / dismantling of fan & fan blades, cleaning, servicing, oiling, greasing, carrying out repairs such as replacement of capacitors, bearings, bushes, canpoy, condensor, clamp, safety pin, rubber bush and reassembling the fan & fan blades,, connecting up, testing and re-fixing of the same ceiling fan of any sweep including provision of new cable from ceiling rose/ connector to fan and spray painting of ceiling fan with two coats of synthetic enamel paint after prepartion of surfaces,complete all as specified and directed.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces. Complete all as specified and directed

M&L for sub main wiring complete two run of size 2.5 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed. (For Building security Lights) Note: Three run 2.5 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as "one unit" length.

M&L for sub main wiring complete Two run of size 06 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 06 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed.(TPN DB to Room DB) Note: Three run 6 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as "one unit" length.

Supply & fix sheet metal enclosure powder coated for MCB DB SPN 8 way double door with din rail and bus bar including making good to the disurbed surface matching with the existing complete alla s specified and directed.

S & F Vertical TPN DB, 415 volts, 4 way double door, With provision for TP 63A MCCB as incomer and SP / TP MCBs as outgoing With neutral bars & earth bars complete all as specified and directed including making good to the disurbed surface matching with the existing also fixing MCB and MCCB to the panel complete all as specified and directed.

Supply and fix MCCB 63 Amps 4 Pole, with breaking capacity 16 KA complete all as specified and directed.

Supply and fix MCB SP 240 volts 40 AMP Amps breaking capacity 10 KA 'B' Series rating complete all as specified and directed.

Supply and fix MCB SPN 240 volts 32 Amps breaking capacity 10 KA 'B' Series rating complete all as specified and directed.

Supply and fix MCB SP 240 volts 6 to 32 Amps breaking capacity 10 KA 'B' Series rating complete all as specified and directed.

Taking down unserviceable building security light fitting and Supply and fixing pressure die cast housing with epoxy power coated dark graphite grey colour finish. Prismatic polycarbonate cover with individual LED lenses 35 watt, AC 240 Volts 50 HZ ,"IP66 protection, PF>0.95, LED light luminous efficiency shall not be less than 90 LumensWatt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISl and BIS marking". Complete all as specified and directed.

Supply and fix pipe bracket made out of 32 mm dia GI pipe, medium grade, upto 1.5 mtr long, bent to required shape and fixed on pole including necessary clamp/saddle and fixing by screw/bolt complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 32X6 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 48,445.00 (Minus) as listed in Schedule of Credit Note1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

mp construction co (BID ID -3292446)

Jay Jyotirling construction co. (BID ID -3291801)

Peerzada And Sons (BID ID -3296382)

Vishal Builders (BID ID -3296087)

NIKAASH INFRACON (BID ID -3296322)