REPAIR / REPLACEMENT OF PUFF PANEL, CEILING, TILING, JOINERY AND OTHER ALLIED WORKS AT CERTAIN UNITS UNDER AGE B/R I OF GE SUKNA

Amount

M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork & demoliton complete all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. & demoliton complete all as specified and as directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.

S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE)

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

All as per Sl item No 05 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each

Taking down shutters of any description not exc 1.0 Sqm each complete all as specified and as directed.

All as per Sl item No 07 above but exc 1.0 Sqm but not exc 2.0 Sqm each

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F mortice lock, vertical type, size 100 mm four lever of brass complete all as specified and directed.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F 100 mm hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. Make :- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F in repairs towel rail, 18 mm (minimum) dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repair door closer hydraulically regulated aluminium (die cast) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. Make :- Hardwin / Godrej / Doorset

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F roof truss (framed) trussed, purlins,crane gantires of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 including preparation of surface including dismantling complete all as specified and directed.

S&F mild steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F 75 x 60 mm size pressed steel door frames for doors with one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, including filling, PCC in 1:2:4, Type B-0 using 12.50mm stone aggregate complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including taking down old GI / AC roof sheets complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd

All as per Sl item No. 26 above but plain steel sheet.

S&F 3 mm thick cover fillets of standard hard board, 40mm wide, and fixing with screws complete all as specified and directed.

S&F 4 mm thick pre-painted E-fibre board Designer/Decorative fixed or laid/ inserted to Anodised aluminium snap grid frame size 605x605 mm work for false ceiling Hangers with 6 mm dia. G.I. (length as required) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed including necessary dismantling of existing unserviceable ceiling boards of any thickness including cover fillets complete all as specified and directed. Make of boards:- Everest / Visaka Industries / Lafarge / Armstrong Make of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products

S&F in repairs 12 mm thick Plywood, grade BWR, 303 type BB, fixed with screws to timber frame work complete all as specified and directed. Make :- M/s Archidply & Industries Ltd / M/s Sylvan Plyboard (India) Pvt. Ltd (Brand : Sylvan Ply) / M/s Jain Wood Industries (Brand Jayna)

S&F in repairs 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white laminated fixed with screw to timber / aluminium frame work complete all as specified and directed. Make:- Kitply / Bhutan Board / Novapan / Greenply

M&L 20 mm thick granite (of any type) tiles machine cut, bedded over & including 20 mm thick screed bed in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and demolition complete all as specified and directed.

M&L for providing 75mm thick cement concrete, 1:3:6 , type C-2 ( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and fair without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc complete all as specified and directed.

M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd

M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 25 mm thick sand cushioning complete all as specified and directed. Make :- Lovely / Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 20 mm thick in CM 1:4 complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd

All as per Sl item No 38 above but in skirting / dado etc. laid over and including screed bed 10 mm thick in CM 1:3.

M&L 10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying two coat of synthetic enamel paint complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Taking down 15mm bore UPVC tubing/Steel tubing and connections, including cleaning for refixing or removal complete all as specified and directed

All as per Sl item No 47 above but 20 mm bore.

S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, thin layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle and wall flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag

S&F in repairs pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag

S&F in repairs stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Kirloskar / Leader / Zoloto / Venus / Audco / Upadhyaya

S&F waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make :- Prayag / Essco / Hindware (Less Italian Collection ) / Cera (Med Range)

S&F in repairs 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs PVC connections 15 mm size with PTMT nuts, of length 600 mm complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' trap, front or back inlet, including fixing bolts, PVC seat cover and including supply and making all necessary connections complete all as specified and directed. Make:- Hindware / Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)

S&F in repairs vitreous china urinal half stall type, of size not less than 375 x 390 x 590 mm, white including chromium plated urinal spreader & waste coupling complete all as specified and directed. Make:- Hindware, Cat No. - 60002 (Starwhite) or equivalent in Cera (Med Range) / Essco

S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware / Cera (Med Range) / Essco Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in Essco / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and excluding connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware / Cera (Med Range) / Essco

S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Hindware / Cera (Med Range) / Essco Make of Bend Pipe:- Hindware (Less Italian Collection) / Cera (Med Range) / Essco

S&F in repair swivel shower rose size 125 mm of brass chromium plated any colour (minimum weight 40 gms) for fixing with 15mm dia steel pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

S&F 15 mm bore UPVC water tubing including all necessary fittings, fixed to wall or in ceiling complete all as specified and directed. Make : M/S Fusion Industries Ltd / M/S Skipper Ltd / M/s HIL Limited / M/s Ori-Plast Limited

All as per Sl item No 65 above but 20 mm bore.

S&F in repair angular stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed. Make : M/s Jaquar & Company Pvt Ltd (Essco), / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag

S&F in repairs central hole basin mixer, brass, fancy type, chromium plated, for mixing hot and cold water, with ‘U’ shape round casted spout with 450 mm Long Braided Hoses, screwed down for 15 mm bore pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs kitchen plate rack made out of 0.63 mm stainless steel sheet & of size not less than 31" x 30" x 10", standard quality fixed with brass screw complete all as specified and directed. Make:- M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s Bluestar Sanitary Industries Pvt Ltd / M/s JMD International (Brand D-sons)

S&F factory made 60 mm thick PUF (polyurethane foam) sandwich panel suitable for outer wall having both side GI sheet skin of 0.50 mm thick (total coated thickness), colour coated (RAL 7032), pre-painted galvanized iron CRCA sheet conforming to IS 14246-1995 with 50 micron PVC guard film on both side external face of GI sheet skin for protection against scratches during handling and transportation. Base metal of GI sheet skin shall be as per IS 513 and galvanization conforming to GR-120, IS 277. GI sheet skin shall have minimum coating of 5 micron epoxy primer and 25 micron polyester top coat on external face and 7-8 micron primer alkyd backer on inner face which is in contact with polyurethane foam. All opening and sheet termination shall be closed with appropriate factory made flashing / trims (ridge, corner flashing, gable ends,framed opening etc) including taking down complete all as specified and as directed. Make:- M/s BNAL Prefabs Pvt Ltd / M/s Lloyd inculation / M/s RCC Eco-Build Systems Ltd / M/s Kirby Building Systems and Structures India Pvt Ltd / M/s Niagra Metals Pvt Ltd / M/s Zamil Steel Buildings India Pvt Ltd / M/s Paramount Building Solutions Pvt Ltd

All as per Sl item No. 70 above but 40 mm thick PUF (polyurethane foam) sandwich panel suitable for inner wall.

S&F 0.50 mm thick (total coated thickness) galvalume sheet as in Flashing / Wall cladding in inner and outer face of wall, bent / made to shape as per site requirement as in U channel, door & window, side gap, outer corner, inner corner, gable end & ridge of size 0-151 mm, having yield strength 550 Mpa (minimum), coated with hot dip alloy of 55 % aluminium, 43.5 ZInc, 1.5% silicon and finished with resin coat on both side @ 150 gm / sqm of coating (total both surfaces) having overall width and laid width as specified, fixed using hot dipped galvanized, self drilling screws, neoprene and EPDM washers. Penetration and laps shall be sealed with proper sealant, fillers including taking down complete all as specified and as directed. Make:- M/s BNAL Prefabs Pvt Ltd / M/s Lloyd inculation / M/s RCC Eco-Build Systems Ltd / M/s Kirby Building Systems and Structures India Pvt Ltd / M/s Niagra Metals Pvt Ltd / M/s Zamil Steel Buildings India Pvt Ltd / M/s Paramount Building Solutions Pvt Ltd

All as per Sl item No. 72 above but of size 301-600 mm.

Dismantling of Puff panel 60 mm and 40 mm complete all as specified and directed.

Dismantling of wall cladding/Flashing any size complete all as specified and directed.

M&L for 5 mm thick solid plain PVC sheet (min density 600 Kg/Cum) wall panelling, panels stuck on & including framework made out of 5 mm thick & 50 mm wide PVC strips (min density 600 Kg/Cum) fixed to wall vertically at 250 mm centre to centre & horizontally at 600mm centre to centre. PVC strips shall have 6 mm wide and 1 mm deep grooves in their centre for sinking the head of the screw & shall be fixed to wall using 65 mm long MS screws & PVC fasteners at a max distance of 200 mm centre to centre. PVC sheet panel shall be fixed to PVC strip framework using solvent cement & jointing of two PVC sheet panel shall only be done above PVC strip. Minimum size of one PVC sheet panel shall be 1220 (L) x 2440 (H) mm, however in case of complete height of wall panelling is more than 2440 mm, PVC sheet panel of length 1220 mm and balance height shall be fixed above lower panels including taking down complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F decorative fascia eaves board under roof made of fiber cement board colour matching/in contrast with the roof complete all as specified and directed by the Engr-in-Charge.

S&F in repaired aluminium power coated fancy curtain rails plain or colour 20 to 25 mm dia as approved with teak wood finishing brackets and knobs complete all as specified and directed.

Jagatbandhu Enterprises

PS ENTERPRISE

M/S G S ASSOCIATES

M/S B B CONSTRUCTION

M/s TALCO

R N SAH N CO

Shri U K Ghosh

D K SARKAR