Furnishing of extended wing and refurbishment of existing wing of Heavy Water Board at 5th floor of VS bhavan, Anushaktinagar, Mumbai

Customized CE's Table with back unit & side credenza Supplying and intallation of Table fully finished in Veneer on all outer surfaces as per design and top to be of 12mm thick corian along with side credenza on one side. Design Description: a) Main Table (3000mmx900mmx750mm):• Main Table fully finished in Veneer (4 mm thick) on all outer surfaces as per design and top to be of 12mm thick corian supported on one side with side credenza & other side on 40 mm/38mm thick marine plywood. • Main Table top in shape of Rectangular / Arch is to be finished in corian pasted on 36mm thk. marine ply structure equipped with a rectangular leather desk blotter installed in the center of the table and aligned towards working edge of the table. Edge of the table to be 36mm thick +12 mm corian top being extended for edge banding and all corners bevelled with radius of 8mm. • Table to be supported on one side Credenza at same level finished with Veneer above, other side will have one Veneer panel leg of 50 mm thick tapered on edges covering the entire width. Long span will be further strengthened by intermediate supports running across the width partially. Other details shall be as per technica specifications & drawings. b) Side credenza (1000x900x750mm) • Side credenza positioned on one side of the table supporting the table. Credenza fully finished with Veneer pasted on 18mm marine ply equipped with 1 drawer and an open shelf in one column and 2 shutters (inside shelf adjustable) positioned beside the working table. All drawers and shutters detailed with 2 finger grooves 25mm broad with a tapered drawer facia top edge. Drawer internals to be finished with 1 mm thick Leather Veneer. Drawers shall be equipped with soft close Quadro channel. c) Cabin storage detail (Back unit of size:4000 width x500mm depth x2400 height) • Providing, assembling &installation of custom made Back Unit complimenting executive table 1 of size 4000 mm width x 500 mm Depth x 2400 mm height as per technical specifications, drawing/reference figures, theme & as directed by Engineer In Charge. Note: Refer Technical specifications for details

CE's briefing room table Providing, fabricating, transporting & installation of 10-12 seater Conference table of size 3000Wx1150Dx750H consisting of : • Work top-Made of 40mm Thick Pre-laminated twin board(Particle board with both side lamination) or or equivalent board of approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. The top layer shall be corian of 12 to 15mm thickness bonded over pre laminated twin board with bull nose edges. • Access panels provided with soft closing hinges. • Understructure-The Under-structure consists of combination of 25mm and 18mm Pre-laminated twin board and approved shade conforming to IS-12823:1990 or equivalent board , Edge banded with matching 2 mm thick PVC lipping. • Anodized aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. • Wire Management-Bottom cabinet with door shall be provided for flow of wires and cables. Cutout provision below Access flap at four locations for standard 8 modules Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI, VGA-A, etc). Size - 3000Wx1150Dx750H

Grandeur Main Table 3000WX1050D, ERU - 1500W X 600D Providing, assembling, transporting and Placing / Fixing Main table of size 3000 Wx1050Dx750H with attached ERU 1500Wx600Dx610H specification consist of : Main Worktop: Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Leather Pad: Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel. Drawer Unit: Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock. OPEN STORAGE UNIT: Top panel and open storage unit modesty panel is made of 43mm Thick (±1) Combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Emmission Class : Product should comply with emission norms CARB (E1 -P2 grade) Product should be certified by a NABCB Accredited agency for conformity assessment Note: Refer Technical specifications for details

VC collage table Providing, assembling, transporting & installation of High seating Video Conference table of size 2100W X 1200D X 1920 H consisting of: • Frame Material - Particle Board Table Top Material Membrane, • Wire management • Display - Not Included here • Video Conference kit - The system shall facilitate engaging team conversations with audio video configuration. Concealed Audio - Video cabling shall be provided accordingly. Optimum Space & View Angle Table shall be designed considering viewing angle of each user and comfortable space to user. Power Connectivity: Video Table shall be equipped with provision for power connectivity module with ease of access including Popo up box for IO ports/ HDMI ports/ Power socket , switches, USB type A 7 C. • Colour Nova Magnolia + Noce Versailles or of shades approved by the Engineer in Charge. Product should be certified by a NABCB Accredited agency for conformity assessment.

Finesse Main Table 1650W X 750D Providing, assembling, transporting & installation of rectangular sitting desk of size 1650 Width mm x 900 Depth mm x 750 Height mm consisting of : • Table top made out of 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl). Flat edge duly sealed with 2 mm thick PVC beading. • Modesty shall be 18 mm thick plain particle board () PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Emmission Class : Product should comply with emission norms CARB (E1 -P2 grade) Product should be certified by a NABCB Accredited agency for conformity assessment.

Finesse Main Table 1200W X 600D Providing, assembling, transporting & installation of Office Table - size 1200 Width mm x 600 Depth mm x 750 Height mm , consiting of : • Table top made out of 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl). Table flat edge duly sealed with 2 mm thick PVC beading. •Modesty shall be of 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Emmission Class : Product should comply with emission norms CARB (E1 -P2 grade) Product should be certified by a NABCB Accredited agency for conformity assessment.

Open storage units as per drawing & technical specifications Supplying and placing of Freestanding storage with openable swing door shutters. Storage Unit of 450 mm thick shall be provided with shutters made out of 18mm marine ply with thick 4mm thick veneer finished and back in 12 mm thick marine ply. The top, door and shelf are with 6mm matching wooden beading & inside will be 1mm thick fabric finish lamiante. Indluding all the brass hardware and Hinges. Mellamine polish to the veneer or PU finish on mdf is as per the design. Typical size - 1300L x450WX2400MMHT Note: Only front surface area shall be measured for the payment purpose.

Back Unit (Full height storage as per drawing & technical specifications) Supplying and placing of Freestanding storage with openable swing door shutters of width 450mm. Storage Unit shall be provided with shutters made out of 18mm marine ply with thick 4mm thick veneer finished and back in 12 mm thick marine ply. The top, door and shelf are with 6mm matching wooden beading & inside will be 1mm thick fabric finish lamiante. Indluding all the brass hardware and Hinges. Mellamine polish to the veneer or PU finish on mdf is as per the design. Typical size - 1800Lx450WX2400H MM Note: Only front surface area shall be measured for the payment purpose.

Renovating Back Unit Renovating existing storage unit of size 2.1m (H) x 1.2m(L)x 0.4m (D)by providing internal lining with marine ply board toughened glasss shuuters & toughened glass shelves at top portion & bottom portion consisting of with 12 mm thick marine shutters and finsihed with 4 mm thick veneer with final coating with PU paint. Internal lining shall be made with 8 mm thick marine ply board (Side, top & bottom panel ) with matching laminate & PVC Edge banding as approved by EIC a)Top portion (1.5m x 1.2m ) Shutters: 8 mm thick frameless toughened glass door shutters in two panels as per drawing including providing & fixing top & bottom pivot type (GH -GS) of approved finish (golden) fixing arrangement with necessary hardwares/ acessories including making holes for fixing door fittings, with lock & key arrangement at bottom etc. all complete as per direction of Engineer incharge. Glass shelves: Made up of 12mm thick toughened glass including fixing arrangement with SS glass holder & removable as per requirement. b) Bottom Portion (0.6m x 1.2m) Shutter: Shutter shall be made with 12 mm thick marine ply with laminate of 1 mm thickness on inside & finished with PU coating on venner of 3mm thickness on visible side. Venee & laminate shall complements the table as directeed by EIC. Shutter shall be provided with all acessories, locks, handles, hinges of approved make as directed by EIC. Shelves: Shleves shall be 20 mm thick with partition at the centre of same thickness, all finsghed with 1 mm thick laminate. Edgebanding : 2 mm thick PVC edgebanding of matching shade. The bifurcation of glass & wooden portoon at top & bottom shall be done with 25mm thick Marine ply finished in veneer & extebnding beyond the glass shutter to support designed wooden vertical post of 04'' diameter extending to the top panel. All external visible sufave to be finished with venner & PU paint. Cost quoted shall include removing existing cupboard, shelves, shutters all complete & making surface smooth & finished by cement mortal (1:4) & placingg at a designarted place for onward transportation to nearby municipal yard. Note: Only front surface shall be measured for the payment purpose.

Free standing storage as per drawing & technical specifications Supplying and placing of 450mm width Freestanding storage with openable swing door shutters. Storage Unit shall be provided with shutters made out of 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board. The top, door and shelf are with 2mm PVC egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix & Dowels. Indluding all the hardware and Hinges. The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test meeting E1 standards. (Typical size - 1200Lx450WX1050H MM) Note: Only front surface area shall be measured for the payment purpose.