GEAFU-50/2025-26

M&L for guiniting work for RCC upto 15 Mtr height of bldg with the followings :- (a) Removing all loose and damaged concrete/plaster from the affected surface of slab, walls, fins, facia, chajjas, cantilever etc and disposing of debris as directed by Engr-in-Charge. (b) Cleaning exposed reinforcement by wire brush/sand paper, applying rust remover followed by protective coating (zinc-rich epoxy coating) to rebars as per manufacturer's specifications. Make : Pidilite / Asian paint / Fosroc / Berger (c) Using chicken wiremesh or additional reinforcement if required and apply polymer bonding agent. (d) Providing and applying 25mm thick guiniting work using cement-sand mix in the ratio of 1:3, pneumatically applied with a pressure of 2.5 to 3.5 Kg/Sq Cm through a nozzle using compressed air. (e) Followed by curing for 7 days using water spray. (f) Applying 5mm thick rendering in CM-1:3 using WPC. (g) Applying two coats of acrylic exterior emulsion paint over fungal resistent primer in camouflage pattern to match the surroundings. (h) The surface shall be finished ture to line and level as per direction of Engr-in-Charge. (j) Contractor is bound to clear all debries everyday by removing all cementing material from site. Note : The area of work will be hand over at different places in small quantity, Contractor to visit site before quoting rates.

M&L for preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for guiniting work for RCC upto 15 Mtr height of bldg with the followings :- (a) Removing all loose and damaged concrete/plaster from the affected surface of slab, walls, fins, facia, chajjas, cantilever etc and disposing of debris as directed by Engr-in-Charge. (b) Cleaning exposed reinforcement by wire brush/sand paper, applying rust remover followed by protective coating (zinc-rich epoxy coating) to rebars as per manufacturer's specifications. Make : Pidilite / Asian paint / Fosroc / Berger (c) Using chicken wiremesh or additional reinforcement if required and apply polymer bonding agent. (d) Providing and applying 50mm thick guiniting work using cement-sand mix in the ratio of 1:3, pneumatically applied with a pressure of 2.5 to 3.5 Kg/Sq Cm through a nozzle using compressed air. (e) Followed by curing for 7 days using water spray. (f) Applying 5mm thick rendering in CM-1:3 using WPC. (g) Applying two coats of acrylic exterior emulsion paint over fungal resistent primer in camouflage pattern to match the surroundings. (h) The surface shall be finished ture to line and level as per direction of Engr-in-Charge. (j) Contractor is bound to clear all debries everyday by removing all cementing material from site. Note : The area of work will be hand over at different places in small quantity, Contractor to visit site before quoting rates.

M&L for complete removal of existing treatment by mechanical scrubber of old decorated wall scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc (plastered or unplastered surfaces) etc on walls, washing, rubbing down and stopping of painted surfaces and filling putty or white cement to holes, cracks and uneven surfaces etc to make good surface and applying a coat of anti fungal priming paint by mechanical spray gun through following OEM (i) Asian Paint, (ii) Berger, (iii) Narolac on walls, facia / chhajjas etc uoto 15-20 Mtr height (including scaffolding if required) complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as spfd.

M&L for applying two coats of cement base paint in camouflage pattern on walls, facia / chhajjas etc upto 15-20 Mtr height (including scaffolding if required) complete all as specified and directed by Engr-in-Charge. (i) Dura Cem, (ii) Berger Paint, (iii) Acquolac paints. Note : 1. Camouflage pattern will be approved by the GE in consultation with the Station authorities. 2. The work shall be executed under supervision of manufacturer representative only. 3. Contractor will submit guarantee/warranty for 2 years on his letter pad duly countersigned by manufacturer / auth dealer before claiming of any payments.

M&L for preparation of old surface of ceiling/walls of any description and applying one coat of white wash by filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good at height upto 15Mtr or inside staircase upto 4th storied bldg complete all as directed.

M&L for marking/numbering in white paint over black paint surface incl preparation of surface to write letters, figures (Block, Roman, Italic or Indian) stops, comma, short lines etc n.exc 30cm height at a level n.exc 10m from average ground level complete all as directed.