SPECIAL REPAIR TO BUILDING NO P 04 1 AND 3 NEAR SIGNAL COY UNDER AGE I DARJEELING

Amount

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

M&L Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.

M&L for Non-Skid Ceramic Coloured Tiles 7mm to 8mm thick, area of each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tile, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.

M&L Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L Chequered Cement Concrete Tiles 300x300x25mm thick in Floors, etc., set, jointed and pointed in Neat Cement Slurry in Floors with Grey Cement and no Pigment, complete all as specified and as directed. NOTE : Screed Bed shall be Measured and Paid separately under relevant Items.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove Dust, debries/ rubbish etc., complete all as specified and as directed.

M&L Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Fair face of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (Externally) 20mm thick in Cement Mortar 1:4 on other than Fair face of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., plastered surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.

M&L preparing newly plastered surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of Chalk Whitening, complete all as specified and as directed.

M&L preparation of new plastered surface of wall & applying two coats of exterior weather coat paint over a coat of cement primer complete all as specified and directed.

M&L for complete removal of existing treatment on plastered or unplastered surfaces of walls including brooming down or steel wire brushing,scrapping down smoke scoot,mould,moss and efloroscent salt,trading oil and greasy spots and applying two coats of exterior weather coat over a coat of cement primer, complete all as specified and as directed.

M&L preparing previously untreated Surfaces of Wood and Wood Based Materials of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with clean sharp Sand after tarred, complete all as specified and as directed.

M&L preparing previously untreated Surfaces of any description and girth not otherwise described and treating with Tar or Coal Tar Black Paint to Holdfast or Similar Small Items area tarred not exc. 0.10 Sqm Each including Sanding with clean sharp Sand after tarred, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3 mm as in Holdfast size for Door, Window Frames or Chowkat, etc., cut to length or drilled hole and fixed with screw, etc. grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C-1 (20mm graded aggregate) as in P.C.C. bed block in holdfast, coping, etc. including use and waste of Form-work as required/ordered at Site(s), complete all as specified and as directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for complete removal of existing treatment on plastered or unplastered surfaces of walls including brooming down or steel wire brushing,scrapping down smoke scoot,mould,moss and efloroscent salt,trading oil and greasy spots and applying two coats of distemper oil emulsion, complete all as specified and as directed.

M&L preparing old treated/decorated surfaces of Walls and applying Two Coats of White wash, complete all as specified and as directed

M&L preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed

M&L preparing old painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

S&F harrison rails,mild steel,chromium plated with fixing brackets,stops,rollers etc complete all specified and as directed..

Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Sqm Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc 4.00 Sqm Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Sqm but not exc. 2.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description not exc 1.0 Square Metre Each, complete all as specified and as directed.

M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

S&F 35mm thick, 2nd class hardwood plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all specified and as directed.

S&F 30mm thick 2nd class hardwood glazed and skeleton window shutter open rebated and prepared to received glass gauge with sash bars edge of framing plain chamfered or round , fitted with cut and mitred bends for securing glass gauge etc but devided into squares, with plain,chamfered or rounded, mitred and rebated sash bars, any numbers provided with styles and rails etc size of member of shutters as specified in SSR part-I sec-VIII clause 8.24 ( b) fitted to chowkats complete all specified and as directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all specified and as directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all specified and as directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all specified and as directed.

S&F 150mm long aluminium anodised tower bolt of extruded section complete all specified and as directed.

S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all specified and as directed.

S&F 125mm long extruded aluminium alloy handles, fabricated type anodised complete all specified and as directed.

S&F 125mm long aluminium anodised tower bolt of extruded section complete all specified and as directed.

S&F in repair Vitreous China White Squatting Pan (Orissa Pattern) of size 580x440 mm with integral foot rests, 'P' or 'S' Trap and (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repair, complete all as specified and as directed.

Supply and fix in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed.

Supply and fix in repair Stop Valve 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with long Shank and Cup(Consealed Type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S & F in repair PVC connection, heavy duty15 mm bore, 60 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

Supply and fix in repair Bib Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

Supply and fix in repair Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) without pedestal, a pair of Cast Iron Bracket duly painted / Erecting Stand including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Wash Basin complete all as specified and as directed.

Supply and fix in repair Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Demolition of Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Surface Channels and Drains, Manholes etc. including use and waste Formwork as ordered, complete all as specified and as directed.

M&L Extra forming Fair Finished to Drains or Channels 30Cm inner girth in Cement Concrete surfaces using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.

M&L Cement Concrete 1:3:6, C-2 (40mm graded aggregate), 75mm thick as in Plinth protection, Floor, Path, etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F PVC (SWR) half round gutters drain pipe 180mm bore , fixed to eave board with necessary fixing arrangement , complete all as specified and as directed. Note - Fixing clamp will be measured and paid seperately.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors/ fixed to wall, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors/ fixed to wall, complete all as specified and as directed.

S&F 180mm bore (dia) PVC (SWR) joint tee with end cap fixed to gutter drain pipe, complete all specified and as directed.

S&F 180mm bore (dia) PVC (SWR) pipe clamp, fixed to eave board with and including necessary fixing arrangements complete all specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Bend any type, provided with Access Door, etc. and Jointing with Solvent Cement and fixed, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Junction Single (Single T) Equal or Unequal with Access Door, etc. jointing with Solvent Cement and fixed, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Bend any type, provided with Access Door, etc. and Jointing with Solvent Cement and fixed, complete all as specified and as directed.

Supply and fix in repair Waste Pipe 32 mm bore dia (bore) 90 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed.

Supply and fix in repair Waste Pipe 40 mm bore dia (bore) 90 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed.

Supply and fix in repair Waste Coupling of PTMT (minimum weight 45 Gram) suitable for Discharge Pipe 32 mm bore (dia) Wash Hand Basin, Sink, etc., half or full threaded, complete all as specified and as directed.

Supply and fix in repair Waste Coupling of PTMT (minimum weight 60 Gram) suitable for Discharge Pipe 40 mm bore (dia) Wash Hand Basin, Sink, etc., half or full threaded, complete all as specified and as directed.

Supply and fix in repair Sink with Drainage Board made of l.0mm thick Stainless Steel Kitchen or Laboratory Overall size 915 x 460 Bowl size 410 x 330 x 160mm with Plugs, Washers and Wastes, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and fixed, complete all as specified and as directed.

Taking down carefully existing old unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit (Service-able Fittings such as Switches, Ceiling Roses, Pendants, Fan Regulators, Sockets, Light Fitting, etc. to be kept in safe custody for reuse) and making good disturbed surfaces of Ceiling, Walls, etc. so as to match the existing Finishes complete all as specified and as directed.

Taking out/down burnt/unserviceable Main Switches, Cut out, DB's, Bus-bars Chambers including all Fittings & Fixtures, etc. from existing Main Board and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed. NOTE : Quoted Unit Rate against DB's will deemed to be included for taking out/ down of MCB SP/SPN/ TPN.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

M&L for point wiring with PVC casing & caping of required size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as Elbow, bends, junction boxes, saddles incl PVC board (ISI Mark) and screws and rawalplug etc including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and making good disturbed surfaces as directed one light /fan/bell point controlled by one , one way switch, complete all as specified and directed by the Engr-in-charge.

M&L for point wiring with PVC casing & caping of required size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as Elbow, bends, junction boxes, saddles incl PVC board (ISI Mark) and screws and rawalplug etc including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and making good disturbed surfaces, as directed one light point controlled by two, two way switches, complete all as specified and directed by the Engr-in-charge.

M&L for point wiring with PVC casing & caping of required size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as Elbow, bends, junction boxes, saddles incl PVC board (ISI Mark) and screws and rawalplug etc including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected as directed one socket outlet 3 pin 5/6 Amps on independent board controlled by one, one way switch, complete all as specified and as directed.

M&L for point wiring with PVC casing & caping of required size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 4.0 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as Elbow, bends, junction boxes, saddles incl PVC board (ISI Mark) and screws and rawalplug etc including 2.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected as directed one socket outlet 5/6 pin 15/16 Amps on independent board controlled by one, one way switch, complete all as specified and as directed.

M&L for point wiring with PVC casing & caping of required size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 4.0 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as Elbow, bends, junction boxes, saddles incl PVC board (ISI Mark) and screws and rawalplug etc including 2.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected as directed for one metal clad enclosure for geyser out let on the independent board complete all specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 2-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S & F Bell Push Flush type 5 Amp, 240 volt complete all specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3/5 Pin, 5/15 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

M & L for Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type 240 volts, complete all specified and as directed.

M & L Switch Piano flush button single pole one way 15 Amp, 240 volt complete all specified and as directed.

M & L for Ceiling rose, 3 Phase/PVC/polycarbonate, isolated body, 3 terminals and 24 Volts complete all as specified and as directed.

S & F Bell Ding-Dong AC 230 V Single Pole complete all specified and as directed.

M&L for Lamp Holder , PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

M&L for LED lamp 12 watts Make -Havells Cat Part No-11 w(DU) or equivalent model of Philips/CG/Bajaj complete all specified and as directed.

S & F wall mounted batten for LED Tube light fitting 20 Watts including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new wooden round blocks complete of Make Crompton - CAT PT No- DMLN1LT8-16 or equivalent to Bajaj/Philips/Havells complete all specified and as directed.

S & F LED Tube light 20Watts complete of Make Crompton - CAT PT No- LT8-20-865-2 or equivalent to Bajaj/Philips/Havells complete all specified and as directed.

S&F sleek LED mirror light fitting 07 watt complete all as specified and as directed by Engr -in- charge. Make : Crompton Model - LINNET# Cat Pt No-LCL-07-CDL or equivalent model of Philips/Bajaj/Havells etc.

S&F sleek LED Bulk head fitting 10 watt complete all as specified and as directed by Engr -in- charge. Make : Crompton Model -STUD Cat Pt No-LBHP-10-CDL or equivalent model of Philips/Bajaj/Havells etc.

S&F LED Building Security light fitting 25 watt complete all as specified and as directed by Engr -in- charge. Make : Crompton Model -ASTRA Cat Pt No-LSTS-25-CDL or equivalent model of Philips/Bajaj/Havells etc complete all specified and as directed.

S&F GI light grade pipe 1.5 m long bend to 45-90 degree and of diameter 25 mm suitable for building security light power cord pipe diameter with and including necessary clamps for fixing building security light including making hole to wall if necessary complete all specified and as directed.

M&L Sub-main Wiring with 2-Runs of Single Core 6.0 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 4.00 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

S & F DB with sheet metal enclouser 240 volts, 8 way with 200 Amp rated bus bar Single pole & neutral (SPN) double door incl fixing on suitable rectanguler block complete all specified and as directed.

S & F MCB Single Pole and neutral (SPN) C Curve 240 volts of capacity 40 Amp 240 volt complete.Make-Indoasian optipro Cat no 811152 or equivlanet model of Legrand/Havells/L&T complete all specified and as directed.

S & F MCB Single Pole of cap 6-32 Amp, C Curve 240 volts complete.Make-Indoasian optipro Cat no 811122 to 811129 or equivlanet model of Legrand/Havells/L&T complete all specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete all specified and as directed.

Supply, fix, install and testing of ISI marked metalic body BEE 5 star rated water heater storage type, vertical, electrically operated single phase 50Hz, of 25 Ltr capacity with Anchor fastner-04 Nos. of suitable size and including Flexi Connection pipe of 450mm long (02 Nos), complete all as specified and as directed. Make- Havells, Model- Monza DX, Cat No.- GHWAMGSIB025, or equivalent of make of USHA/ BAJAJ/ V-GUARD

RAI CONSTRUCTION

HIRA SINGH

GEETA CONSTRUCTION

Damdoo Bhutia

JALAPAHAR HARDWARE