In Ward-28, work of installing lights by installing another pole on the road from Khanjapur Kali River bridge to Budhana turn and installing high mast at pre-determined place on Shaheed Prashant Sharma Setu and Budhana turn.

Supply and Fixing of 9 mtr Gl Octagonal Pole of approved make (Top dia 70mm, Bottam dia 155 mm and Base plate 12mm thick) Having 3mm Thikness with duble arm Bracket(1 Mtr. Lenght)on R.C.C Foundation including the cost of Foundation, Foundation Bolts, Excavation & back Filling and Required T&P Complete in all Respect. (Crompton, philips, Bajaj and Equivalent) UP.PWD. Electrical SOR-2018 SI. No. 645

Supply and Fixing of L.E.D Street Light Fitting Having Die cast Aluminium Body and Diffuser With Driver set Suitable for 110 to 130 Watt. Confirming of IP 66 Protection complete in all respect. (Crompton, philips, Bajaj and Equivalent) UP.PWD. Electrical SOR-2018 SI. No.1424

Supply and Fixing of 16 mm 4 core Aluminium Armoured Cable as per UP.PWD. Electrical SOR-2018 IS. NO. 501 (i) (Crompton, Hair, polycab)

Supply and Fixing of GI pipe C Class heavy duty of 76 dia UP.PWD. Electrical SOR-2018 IS. 507

Supply and Burrying of 75mm Dia 3 Mtr. Long Electrode Casted With Maintenance Free, Conductive Concrete, non Corrosive Mixture (Ultra Low Resistive carbon 0.001 ohm/mtr) in the ratio of 3:1:1 (Marconite: cement : water) on M.S Rod with hole (16 mm diameter x 3 Mtrs) will be vertically installed for Earthing with 1 Mtr. G.I Strip (25mm x 2.5mm) connected with S.S nut bolt. The Earth Electrode will be installed into the 100mm pit up to 3000mm Depth. Normal Soil with be used as backfill Material. UP.PWD. Electrical SOR-2018 SI. NO. 729 (C)

Supply and Fixing of Automatic Street Light timer Switch 25 A TPN as per UP.PWD. Electrical SOR-2018 IS. 807(e)(ii)

Supply and Fixing of P.V.C Flexeble Pipe

Supply and Fixing of 0.5 Amp to 5 Amp. S.P. MCB. (10ka) C Curve as per UP.PWD. Electrical SOR-2018 IS. 1001

Supply and Fixing of 16 Mtr High Mast Shaft of Approved Make With Rising system hot dip Glavanized inside and Out side Dip, Having pole Sheet thickness 3mm, Top Dia Minium 150mm Bottom Dia 310mm Base Plate 25mm Thick Suitable for Weld velocity as per IS 875 part 3 & Having No Circumferential Weld, with Accessories For Hight Mast Such as Head Frame Suitable For 6 to 12 luminaries and its Control Gear Boxes 1.5 HP Power Tool Moter, 3 Points Suspension System with Steel Wire rope 6mm Dia, Double Drum Winch, Including Making sutiable Fondation as per manufature Drawing,/Site Reuiment Along With Fondation Bolts nuts, Washers,Anchor Plastes etc Complete in all respect.

Supply and Fixing of Factory Wired Integral LED Flood Light lumlnalres with Dia Cast Aluminium Housing Built With Driver Set Suitable For 170 to 200 Watt, Confirmating to IP 66 Protection complete in all respect.

Supply and Fixing of Single unit LED Aviation Obstruction Light Complete With Transformer and LED Spiral etc complete in all Respect.

Repairing of touch and earth with R.C.C