Repair and Renovation of Existing Boosting Station in C2 Block and 2100 Lane Boosting Station in C Block, Sushant Lok 1 under EE-4B MCG. Recall

Supplying erection, testing of fully automatic electric controlpanel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement\ complete in all respect. Make:- LandT, SIEMENS, BCH, SCHNEIDER. 60 HP Motor

Supply and erection of 1.5 HP single phase monoblock motor pump set with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work Make Crompton,Havells,Lubi,Kiloskar

Horizontal centrifugal pump has 50 hp motor power, optional input voltage 3 phase AC 220V/230V/240V, 380V/400V/415V to 440V/460V/480V and optional input frequency 50Hz/60Hz for sale. 50 hp centrifugal pump with maximum flow 65m3/h (286 gpm), maximum head 50m (165ft) and same diameter of inlet and outlet 80mm (3 inches), can be used for HVAC and refrigeration water circulation, high-rise building pressurized water supply, etc

S/E of T-5 energy efficient LED light fitting 1x20 watt, with 20 watt LED tube fit on wall/ceiling including necessary connections in all respect Make:- Bajaj/Philips/G.E./Halonix /Crompton

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10-metre openable length ( total length 90 m), having 50 nos rounds per 6-metre length, up to 3 m height of wall with existing angle iron ‘ Y ’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/meter (cost of M.S. angle, C.C. blocks shall be paid separately)`

Supply and laying of following sizes of 1.1 KV XLPE insulated Aluminium conductor armoured cables complete as required and as per specifications with cost of indoor/outdoor terimantion 3.5 x 120 sq.mm. Aluminium Cable