SPECIAL REPAIR TO BLDG NO P 13 1 SINGLE LINE OFFRS AT STN ARTY OFFRS MESS AND OTHER SANCTIONED WORKS UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area complete all as specified.

Demolition of mud phuska in roofs,any thickness,including leeping plaster(whether full thickness removed or only a part thereof) complete all as specified.

Material and labour for brushing neat cement slurry with 3 kg of cement per square meter.

Material and labour 10mm thick screed bed or bedding layer of mortar in cm(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface.Note:WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified.

Material and labour applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

Supply and fixing 50 micron thick Polythene film,laid on roof including preparation of roof surfaces complete all as specified.

Material and labour for Mud phuska,80mm thick average,consolidated thickness,on flat roofs including 25mm thick mud plaster complete all as specified.

Supply and fixing 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as per item no.9 here-in-before but using old brick tiles retrieved from dismantling (item no.1 here-in-before) including cleaning and removal of mortar from tiles complete all as specified.

Material and labour Plain cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction,roof benching,kerbs,mud stop,coping,rounded or chamfered on edges,incl necessary sloping on roof including formwork complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified.

Supply and fixing factory made for pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

Supply and fixing factory made 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified.

Supply and fixing factory made 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

Material and labour for cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified.

Supply and fixing 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

Supply and fixing Mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified.

Supply and fixing 200mm long MS barrel tower bolts stone enamelled black with bright bolt complete all as specified.

Supply and fixing 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

Supply and fixing 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

Supply and fixing Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

Supply and fixing Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

Supply and fixing Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

Supply and fixing in repair 3 mm thick ordinary quality sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified.

Supply and fixing 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane complete all as speciifed.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as speciifed.

Supply and fixing 6mm thick figured glass, type and glazing with oil putty in squares exc 0.5 sq. m in each pane

Supply and fixing Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.

Supply and fixing in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Supply and fixing factory made Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification.

Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

Supply and fixing PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

Supply and fixing PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified.

Supply and fixing PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

Supply and fixing PTMT handle 150mm long fixed with steel screws complete all as specified.

Dismantling of boarding, any description, fixed in any position with nails.

Material and labour for designer , fabrication , installing and fixing in position 4.00 mm ( Brass gold polished 4 DM) thick aluminium pannels 4-layer coating ,facing at walls , coil coated with kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on one face and polymer (service) coating on other face as specified using stainless steel screws ,nuts , bolts whaser , cleats , weather silicon saelant , backer rod black silicon grooming etc complete all as specified and directed by engineer in charge ( Make - Eurobond and equivalent)

Material and labour for 12 mm thick prelaminated particle board interior grade , prelaminated one side with decorative choice laminated & other side balencing white laminated , fixed with screw to timber frame work complete all as specified by engineer in charge

Material and labour for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed by Engineer in Charge

Material and labour for 40 mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame workor with staples on snap grid including wooden frame work complete all as specified.

Material and labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

All as item No. 44 but to sunk or raised moulding

Supply and fixing 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

Supply and fixing 125mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

Supply and fixing Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

Material and labour for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item 50 above here-in-before but using old bricks retrieved from demolition under item 49 here in before including cleaning and removal of mortar from old bricks.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.

Material and labour for external rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even complete all as specified.

Rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement

Material and labour for internal rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

Material and labour for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge.

Material and labour for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Material and labour for glazed coloured designer ceramic tiles of size200X300x7mm or 300X450mmX7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

Material and labour for glazed coloured designer ceramic tiles of size200X300x7mm or 300X450mmX7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

Material and labour for Glazed ceramic tiles, coloured (light shade with dark shade boder as approved), of size 350X250/450x350 of 7mm thick on vertical surfaces such as in dado set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over and including 10mm thick backing in cement mortar (1:4) complete all as specified.

Material and labour light shade Vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles not exc 0.36Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

Material and labour for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Material and labour Vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Dark Shade/ Double charged) cement to matchover 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

Material and labour for (Dark Shade / Double charged) shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

Material and labour Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.

Material and labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 52.

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided.

Material and labour 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement. Note:- WPC shall be measured and paid separately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified.

Material and labour PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion

Material and labour 30mm thick PCC(1:2:4) type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified

Supply and fixing galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Supply and fixing galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No.77 here in before but 20mm dia.

Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed by Engineer in Charge

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of reinforced cement cocrete in any position complete complete all as specified.

Material and labour Cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

Supply and fixing in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

Supply and fixing 15mm bore dia chromium plated fancy type Bib tap with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fixing in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fixing 500 Ltr Rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.

Supply and fixing 1000 litres capacity rotational moulded, triple layered polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

Supply and fixing in repair Gun-metal, globe or gate valves 15mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

Supply and fixing in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

Supply and fixing in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.

Supply and fixing in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup.

Supply and fixing in repair 15mm stop cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or brass ferrule fancy type chromium plated with long shank and cup(Concealed type).

Supply and fixing PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

Supply and fixing 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified.

Supply and fixing CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed.

Supply and fixing Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

Vitrous china (White) half stall urinal with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, with brackets, flush pipe, union for discharge pipe as in repair complete all as specified.

Supply and fixing Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

Supply and fixing PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

Supply and fixing Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

Supply and fixing 50mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.

Supply and fixing in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia,below or above ground level or laid in floors,jointed in cement mortar and taking out complete all as specified.

Supply and fixing 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

Supply and fixing 110mm bore, PVC (SWR) bends any radius complete all as specified.

Supply and fixing 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

Supply and fixing PVC(SWR) vent cowl,for 110mm bore pipe complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75mm bore, PVC (SWR) bends any radius complete all as specified.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards slabs/ blankets, any thickness, including cover fillets complete all as specified.

Supply and fixing 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.

Supply and fixing 5mm thick Prelam colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.

Supply and fixing 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete.

Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling wrought iron/mild steel work in any position complete all as specified and directed

Supply and fixing Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Supply and fixing Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer in Charge.

Supply and fixing Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge.

Supply and fixing rolled mild steel in Joist,channel,angle,or tee sections,fixed independently,without connecting plates,etc (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-290(Gde E-165) complete all as specified and directed.

Material and labour Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Material and labour Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Material and labour Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer and applying a coat of wall care putty complete all as specified.

Material and labour for Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

Material and labour for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

Material and labour for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

Material and labour for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

Material and labour for preparing of old ceiling decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of oil bound distemper including cornices complete all as specified and directed.

Material and labour for complete removal of old existing treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorate surface of wall and applying a coat of 1mm thick wall care putty of approved make as on wall surface and two coats of oil based distemper (white or tinted) complete all as specified and as directed by Engr-in-charge.

Material and labour for Preparation of old painted surface of ceiling and applying one coat of oil bound distemper complete all as specified.

Material and labour for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of cement based paint including cornices complete all as specified and directed.

M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.

M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices all as specified and directed.

M & L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cespits, manholes, pier holes etc or laying of cable, pole foundation et n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

Returning filling in layers including leveling watering and well ramming in layers n.exc 25 cm thick compelte all as specified and directed.

Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundation filling, sub base for floors etc complete all as specified.

Material and labour for RCC1:1½ : 3 nominal mix (20mm graded aggregate) in foundation,footing, plinth beam,bases for columns etc

Use and waste of formwork to sides of concrete foundation ,footing,base of column ,raft beams , sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter to rough finish surface of concrete flat.

Material and labour for RCC1:1½ : 3 nominal mix (20mm graded aggregate) in Columns, pillars, piers and similar works

Use and waste of formwork to sides of posts, struts, piers, columns and similar work vertical or to batter to rough finish surface of concrete flat.

Material and labour for RCC1:1½ : 3 nominal mix (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, lintels, cantilevers. also splays between floors and beams, etc

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

Formwok to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 thick (Horizontal or sloping) complete all as specified.

Material and labour Reinforced cement concrete (nominal mix 1:1.5:3) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in chelves

Supply and fixing Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

All as per item no 153 but 6mm to 8mm dia

Material and labour TMT mild steel bars 6 to 8mm dia,as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips

Material and labour for Plaster of paris Molding 15 mm width at the cornices of wall and ceilling, design of moulding as directed by Engr in charge and complete all as specifed and directed.

Supply and fixing machine pressed precast 60mm thick interlocking paver block (M-35) cement concrete tiles (Coloured) of approved design & pattern as approved by GE, set over & including 50mm sand cushion complete all as specified and directed.

Material and labour sand filling under floors or in foundation or cable protection including watering and consolidation complete all as specified.

Material and labour PCC 75 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as directed.

Material and labour 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as directed.

Dismantling plain or corrugated sheet/fibre sheet on roof covering complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

All as per item NO : 162, but 0.80mm thick plain sheet in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 all as specified and directed.

Dismantling PVC pipe including clamps complete all as specified.

Dismantling structural steel work framed truss etc.

Supply and fixing of rolled mild steel as in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. conforming to Fe-410-W (Gde E-250) quality A.

Material and labour for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.

Material and labour fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.etc complete all as directed by Engr-in-Charge.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories as required such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One 5 Amps socket outlet same board controlled by one single pole 5 Amps switch

(c) One 5 Amps socket outlet independent board controlled by one single poles 5 Amps switch

All as per Item No 172 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply and fixing in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Make - Anchor/Havells/Legrand

Supply and fixing in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Make -Anchor/Havells/Legrand

Supply and fixing in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Make -Anchor/Havells/Legrand

Supply and fixing in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Make -Anchor/Havells/Legrand

Supply and fixing in repair Modular white cover plate including GI box inner, 3 module complete all as per specified & directed. Make : Anchor/Havells/Legrand

Supply and fixing in repair Modular white cover plate including GI box inner, 4 modulecomplete all as per specified & directed. Make : Anchor/Havells/Legrand

Supply and fixing in repair Modular white cover plate including GI box inner, 8 module complete all as per specified &directed. Make : Anchor/Havells/Legrand

Supply and fixing in repair Modular step type regulator,120 W - 2 module complete all as per specified and directed. Make - Anchor/Havells/Legrand

Supply & Fixing LED tube light fitting 18 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing of LED Mirror light 7 Watt 2 ft adjustable type enegy saving curve type complete all as specified and direceted.

Supply and fixing of LED Wall bracket light 8 Watt decorative type (Warm white) enegy saving including 8 W LED Bulb complete all as specified and directed.

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm

Supply and fixing Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and directed.

Supply and fixing Modular bell push piano flush type 6 Amps 1 module complete all as specified and directed.

Supply and fixing bell ding dong AC 230 volts single pole complete all as specified and directed

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply and fixing MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed.

Supply and fixing MCCB 63 Amps 415 Volts 16KA breaking capacity complete all as specified.

Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

Supply and fixing MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA in MCB DB, complete with connection testing and commissioning all as specified

Supply and fixing MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA in the MCB DB, complete with connection testing and commissioning all as specified

Supply and fixing MCB SP, 40 Amps, 240 volts, "B" series, 10KA, in the MCB DB, complete with connection testing and commissioning all as specified

Supply and fixing modular type AC motor starter 25 Amps 230 volts Two module complete all as specified and directed. Make : Havells Cat Part No AHFSMXW251 Or equivqlent

Supply and fixing modular type 16 A / 25 A shuttered socket, 230 volts Two module complete all as specified and directed. Make : Havells Cat Part No AHFKCXW253 Or equivqlent

M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 70 Sqmm 3.5 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

Supply and fixing Galvanized steel tube 40 mm dia light grade For protection of cable complete all as specified and as directed

Supply and lay bricks of old size sub class 'B' type for protection of U/G cable in trenches all as specified and directed.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing Switch piano flush type 15 amps, single pole one way complete all as specified and directed.

Supply and fixing Socket outlet 5 pin, 6 Amps, piano flush type complete all as specified and directed.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.

Supply & Fixing MCB, Single Pole and neutral 240 V, 40 Amps 10 KA 'B' series.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia complete all as specified and as directed

All as per item No 214 but 20 mm dia.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 20 mm dia and fixed complete all as specified and directed.

Supply and lay bricks of old size sub class 'B' type for protection of U/G cable in trenches all as specified and directed.

KAILASH CONSTRUCTION COMPANY

CHETAK CONSTRUCTION COMPANY

JAWAHAR CONSTRUCTION COMPANY

A N CONSTRUCTION CO

V V AND COMPANY

GS and Co

M/s Manoj Construction Co.

Brar Enterprises