Special repair of Sub center Building at Untpur Tehsil Nalagarh Distt Solan HP

Amount

Demolition below G.L upto 1.50 metres depth including stacking of serviceable materials and disposal of unserviceable materials within 20 metres lead and including cutting the neceesary reinforcement and separating from R.C.C./R.B. work

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :Lintels, beams girders bressumers and cantilevers upto floor two level :

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level :Tor Steel :

6mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Sand)

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with:Cement Mortar 1:6 (1 Cement : 6 Sand)

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge. Profile-A

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 40 mm thick 2nd class deodar wood

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 2nd class deodar wood

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.Readymixed paint brushing with white lead for priming

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than whit

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:Frosted Glass. 4mm thick.

Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of following shades: GREY

Precast terrazzo tiles hydraulic compressed 20 mm thick (with marble chips of specified sizes) fixed on wall on 10 mm thick cement plaster 1:3 (1 cement:3 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of following shades: GREY.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Floors etc.upto 200mm. in thickness

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill.

Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps (Medium grade) tube fitting and clamps including making good the wall ceiling and floor all modes of transportation in all leads lifts and all incidental charges. a)15 mm nominal bore :-

b) 20 mm nominal bore

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials within all leads and lifts

Constructing chamber 600x600x750 mm inside size for fire hydrants with CI SURFACE BOX 350 mm x 550 mm top and 165 mm deep (inside) with changed lid and RCC top slab 1:2:4 mix 100 mm thick foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 finished with a floating coat of neat cement including curing complete with 200 mm thick walls of brick masonry in cement mortar 1:5 including all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (seat and cover to be measured and paid for separately) all modes of transportation in all leads lifts and all incidental charges .(i) Anglo Indian (Universal closet)

Providing & fixing GI inlet connection for flush pipe with WC pan all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing plastic seat (solid/ hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers all modes of transportation in all leads lifts and all incidental charges.:- solid Type (a) Coloured plastic seat & Cover

Providing & fixing vitreous kitchen sink with CI of MS brackets painted white including cutting holes in the walls making good the same but excluding cost of fittings all modes of transportation in all leads lifts and all incidental charges.:- Flat back (i) 630x450mm

Providing & fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings

Providing & fixing CP Brass waste for wash basin or sink:-32 mm dia

Providing and fixing MI Union for wash basin or sink:- 32 mm dia

Providing & fixing 100 mm sand cast iron grating for gully , floor or Nahni trap

Providing & fixing 600 x 450mm (six hundred into four hundred fifty mm) beveled edge mirror of superior class mounted on 6mm thick AC sheet or plywood sheet fixed with wooden plugs with CP brass screws and washers complete all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing CP brass towel rail with CP brass (heavy duty ISI marked no 8931 & 8934) brackets fixed wooden with all modes of transportation in all leads lifts and all incidental charges. CP brass 600 x 20mm

Providing & fixing chromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing CP brass pillar tap with capstan head all modes of transportation in all leads lifts and all incidental charges. 15 mm dia

Providing & fixing CP brass pillar tap with capstan head all modes of transportation in all leads lifts and all incidental charges. 15 mm dia

P/F CP brass angle valve15 mm without nut and pipe all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing CP stop cock 15 MM dia all modes of transportation in all leads lifts and all incidental charges.

P/F bath shower all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing PVC connection with brass unions 300/450 mm length 15 mm nominal bore

Providing & fixing brass ball valve (horizontal plunger type) High pressure with polythene plastic floats 15mm nominal bore

20mm nominal bore

Providing and fixingPVC water storage tank of ISI : 12701 marked GI inlet and outlet connection 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level:-1000 litrs capacity including all leads lifts and all incidental charges.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhessive, cost of cutting and making good the wall and floors etc complete . 110mm x 90 mm

P/F high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixingg with approved adhessive etc. Complete including all modes of transportation in all leads lifts and all incidental charges. (a) 150 mm nominal size

(b) 110 mm nominal size

Providing & fixing PVC single equal branch with oval access door ISI marked insertion rubber washer 3 mm thick bolts & nuts complete including fixing with approved adhessive etc complete (a) 150 mm dia

(b) 110 mm dia

Providing & fixing PVC door bend with oval access door insertion rubber washer 3 mm thick bolts & nutsISI marked complete including fixing with approved adhessive etc complete 150 mm dia

110mm dia

Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc complete 150 mm dia

110 mm dia

Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete 150 mm dia

110 mm dia

Providing & fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc complete 150mm dia

110 mm dia

Providing & fixing stainless steel kitchen sink of approved standard ISI make with drain board and CP waste with CI or MS Brackets painted white including cutting holes and making good the same but excluding fitting. 610 x 460 mm with bowl depth 200 mm

Providing & fixing PTMT Coloured / white high density polythylene /poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings such as lead valve, syphon 15 mm nominal size PVC ball valve with polythene float with push button, couplings for connections with inlet , outlet and over flow pipe, 40 mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately).

ranjit singh

SURESH CHAND GOVT CONTRACTOR

Rajinder Singh

JITENDER KUMAR

Naveen singh Govt Contractor