Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC E 30 RAJIV NAGAR BEGUMPUR NEW DELHI 110086 | NEW DELHI | NEW DELHI | DELHI | 110086 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹39.7 L+₹1.2 L (3.08%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹40.0 L+₹1.4 L (3.73%)Rejected-Finance PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹40.8 L+₹2.2 L (5.76%)Rejected-Finance RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹43.7 L+₹5.1 L (13.4%)Rejected-Finance 112 AMBALA ROAD NARAINGARH AMBALA 134203 | NARAINGARH | AMBALA | HARYANA | 134203 | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (CENTRAL) DELHI CANTT-10
GE (CENTRAL) DELHI CANTT-10
PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10
2024_MES_647339_1
GE/C-89/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (CENTRAL) DELHI CANTT-10
AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
GE (CENTRAL) DELHI CANTT-10
₹99,600
Yes
10 Sept 2024
21 Mar 2024
20 Apr 2024
21 Mar 2024
18 Apr 2024
4 Apr 2024
21 Mar 2024 - 4 Apr 2024
Amount
Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates in foundation filling and mass concrete.
S&F for Tublar section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete.
S & F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 80mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth.
M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410-W (GdeE- 250) quality.
M & L for Non skid 600x600x8 to 08-09mm thick coloured ceramic tiles as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles.
M&L for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified.
M&L for Powder coated aluminium(minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up thegaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane.
M&L for PVC false ceilings 10mm are watertight and waterproof, just like gypsum false ceilings,with all complete necessary fittings and are more effective and lasting in high moisture environments like balconies, bathrooms, and basements complete all as specified.
M & L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified.
M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.
M&L for cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in blocks for hold fast, coping including form work to concrete surfaces, complete all as specified.
S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.
S&F 30 mm thick 2nd class hardwood Boarding, supplied & fixed with nails in any situation Clean sawn with butt joint as specified in SSRpart-i section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
M&L for one as undercoating and another as finishing coat with synthetic varnishing including wood filler liquid transparent on new or previously untreated surfaces, Surfaces of any description, over 10cm in width or girth complete all as spd.
M&L for 15mm thick rendering on fair face of brick wall surface in CM 1:4 even & fair finishes as specified and as directed.
M&L preparation of newely plastered surface of wall and apply two coats of colour wash over one coat of white wash complete all specified and directed.
S & F rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 1000 ltrs capacity.including float valve 20mm size including 20mm & 15mm gate valve at inlet and outlet complete all as specified.
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, fixed type waste coupling, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complerte all as specified and directed by Engineer-in-Charge.
M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified .
M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under soft soil upto 30cm incl excavation etc complete all as specified.
M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.2 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :
One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely).
One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.
All as per No 30 above but Same board.
One power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 2.5 Sqmm in and including new PVC conduit medium grade not less than 25 mm dia, stranded conductor as earth wire connected to dolly complete.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire. Note-Two runs of 4 sqmm cable and one run of 4 sqmm cable and one run of PVC condit shall be measured as one RM.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6 Sqmm size stranded conductor as earthwire. Note-Two runs of 6 sqmm cable and one run of 6 sqmm cable and one run of PVC condit shall be measured as one RM.
S&F switch modular type 5 Amp SP one way ISI marked complete all as specified.
S&F switch modular type 15 Amp SP one way ISI marked complete all as specified.
S&F socket modular type5 pin 5 Amp flush type ISI marked complete all as specified.
S&F socket outlet modular type 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.
S&F ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed.
Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 160 to 250 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar, cement spill protractor, door earthing, mechanical Impact Strength IK 08, neutral link earth link complete.
S&F MCB SPN 40 to 63 Amp "B " curve, 10 kA.
S&F MCB SP 6 to 32 Amp "B" curve ,10 kA.
S & F Wall mounting air circulator fans AC single phase 230/240 V, 1440 RPM of size 600 mm sweep (24") ,180 watt, Aluminium alloy three blade,Double ball-bearing 90° oscillation,Sturdy close-mesh guard beatifull design,Powerful heavy-duty motor,air dilivery 270 M³/Min, mounting on wall complete all as specified and directed by Engr-in-Charge.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 105 Lumens/watt and including connecting up with PVC sheathed 0.75 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
Supply and fix 10/12 watts PVC body bulkhead fitting with non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is >100lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 0.75 Sqmm copper conductor flexible wire fixed complete all as specified and directed.
S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 60 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.
S&F in replacement MCCB 160 A, 4 pole 36 ka MCCB, completely connected with copper thimble and with all accessories complete all as specified and directed.
Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 3.5 core.
Supply and fix GI Pipe 32 mm dia light grade, for laying in road crossing/ fixing of vertically complete all as directed.
Excavation in trenches n.exc 0.45 m wide and n.exc 0.60 m depth for laying of LT cables etc. and getting out in soft/loose soil complete all as specified.
Returning, filling in, including spreading levelling, watering and well ramming in layers not exc, 25cm depth in soft/loose soil.
Removing excavateed material to a distance not. Exc 50 m and deposting where directed at a level not. Exc 0.6 m above the starting point all as directed.
Supply and spreading clean dry sand in trenches for cushioning/cable protection all as specified and directed.
Supply and laying sub clas 'B' Bricks of old size ( 23 x 11 x 7 cm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer -in-Charge.
imran construction company
M/s Durga Traders
SHREE RAM BUILD TECH
J S CONSTRUCTION CO
SHIVA ENTERPRISES
m/s VK construction company
M/S ANIL KUMAR
The new hut furnitures
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .