Stringing Work of 2nd Circuit on Existing Towers of 132 Khair - Jattari Line Under ETD-I Aligarh

Amount

SUPPLY

Supply of suspension fitting of ACSR panther conductor as per drawing/sample,specification

Supply of Compression type Single Tension Fitting Assembly suitable for ACSR Panther Conductor consisting of Compression type (Outer Sleeve duly made of Aluminium Alloy & Inner Sleeve duly made of HDG Forged Steel) Dead End Clamp with Jumper Terminal (Cone) and HDG Steel Anchor Shackle, Ball Clevis (HH type), Socket Clevis (HH type), Line side Arcing Horn, Tower side Arcing Horn complete with Split Pin, G.I. Bolts, Nuts, Plain & Spring Washers etc. as per Drawing / Sample.

Compression type Double tension fitting assembly suitable for ACSR Panther Conductor consisting of compression Dead End Clamp with Jumper terminal (Cone), Anchor Shackle (2 no.) Yoke Plate (2No.) Chain link, Socket Clevis Eye, Line Side Arcing Horn, Tower Side Arcing Horn Complete with Bolt, Nut, Spring Washer & Split Pin etc

Supply of 4R Stock Bridge type Vibration Damper suitable for ACSR Panther Conductor consisting of High Strength Aluminium Alloy Clamp, High Strength Steel Strands Messenger Cable, HDG Cast Iron Damper Mass, HDG Fasteners etc. as per Drawing / Sample.

Supply of PA armoured rod of acsr panther conductor as per drawing/sample,specification

Supply of Mid Span Compression Joint suitable for ACSR Panther Conductor consisting of extruded Aluminium Outer Sleeve and Mild Steel Inner Sleeve as per Drawing Sample.

Supply of Repair Sleeve suitable for ACSR Panther Conductor duly made of Extruded Aluminium Sleeve as per Drawing Sample.

70 KN polymer insulator (per string)

120 KN polymer insulator (per string)

160 KN polymer insulator (per string)

D-Shackle (01 No. D-shackle= 0.975 Kg) 90 Nos.

Hanger (01 No. Hanger = 2.50 Kg) 150 Nos.

Number Plate in size 165 mm x 150 mm duly made of 16 SWG M.S. Sheet with letter and Numerals in enameled Red Colour on White colour enameled background indicating anem of Transmission line in Short ( In English letter of size 35 mm height ) and tower no. (In English letter of size 65 mm height) as per requirement and with provision of 2 no. holes for fixing along with 16 mm x 40 mm bolts. Nuts & washers.

Danger Plate in size of 380 mm x 250 mm duly made of 16 SWG M.S. Sheet Written " Danger 'in English letter of size 35 mm height in Hindi letter of size 45 mm height,"132000 VOLT" in English letter of size 30 mm height and indicating "Sign of Danger" in size of 70 mm x 80 mm all shown symmetrically in enameled Red Colour on white colour enameled background and provision of 2 nos. holes for fixing along with 16 mm x 40 bolts, nuts and washers.

Phase Plate in Sets of Red, Yellow & Blue Colour Circular Disc (Both sides enameled) of dia 100 mm duly made of 16 SWG Sheet with provision of 01 No. Hole for fixing along with 16 mm x 40 mm Bolt, Nut & Washer

Supply of BIRD GUARD For ACSR panther conductor as per drawing/sample,specification

Anti-climbing device

Laying, stringing, tension, clamping, jointing etc of 3phase ACSR Panther conductor including hoisting of insulators, fitting of all necessary hardware and accessories i.e. fitting armour rods, vibration dampers etc. on all three phases of 132 KV Khair-Jattari line from 220 KV Khair to 132 KV S/S Jattari.Other Ckt. in charged condition.

Construction of 01 No. C type tower including at 132KV S/S Jattari :-

Survey including preparation of final tower schedule of material, marking of location etc.

Check survey & final peg marking (Route length)

Soil investigation

Cost of excavation of C type tower foundation pits including all earth work, back filling and levelling etc.

Concreting of Foundations using M15 Grade Cement, Concrete, Coarse Sand mixture in the Ratio of 1:2:4 with 20 mm Stone Metal for Towers & Gantries including Cost of Materials, De-Watering, Shoring, Shuttering, Framing, Curing etc.

Cost of setting of stubs including all foundation work but excluding the cost of concreting and excavation (Rate per location) for following C type tower

Installation of steel reinforcement bars in RCC foundation including cost of steel reinforcement bars with cutting, bending, placing, binding etc.

Grounding work including all earthing materials for pipe type earthing

Erection of C type tower super structure and their extension wherever required including all work above ground level excluding hoistingof insulators and hardware

Jagad Electrical & Fabricators

ASHUTOSH ENTERPRISES