GE/863/EWS-T-74 OF 2025-26 COMPREHENSIVE BR REPAIR IN DIFFERENT BLDGS OF OTM ACCN, ROOF SHEET, F

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of primer on walls all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed.

M & L for prepainted galvanume aluminium zine coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550 Mpa in roof coverings fixed with self tapping screws Complete all as specified and as directed by Engr-in-charge.

M & L Prepainted galvanume aluminium zine coating GI based plain steel sheeting 0.50 mm thick any colour having tensile strenght 550 Mpa in roof coverings fixed with self tapping screws Complete all as specified and as directed by Engr-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section , size of grid 605mm X605mm with hangers 6mm dia G.I. (upto 1200mm length ) adjusting level, fixed to Purline/rafter complete all as specified and directed by Engr in charge.

S&F Non asbestos fiber cement building board 6mm thick ( Designer ceiling board) , fixed to aluminium or MS galvanised snap grid frame work fixed with screw in ceiling complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/chequred tiles or granite complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed .

All as per item No 12 above but as in skirting / daddo and pointed in white or coloured cement to match over backing coat 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed .

M & L for glazed ceramic coloured tiles of size 300x 450X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile incl adhressive complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement including necessary joints complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair all as specified.

M&L for chequered cement concrete tiles 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M & L for providing, cement concrete Type B-1, 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

S&F 2nd class hardwood factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed.

S&F 2nd class hardwood factory made 35 mm thick pannel (two pannel) with lock rail and pannels of 9mm B.W.P. commercial ply and 12mm verneered particle board with commarcial veneered both faces. the size of rail and style as per IS-1003(Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

Repair of rolling shutter exceeding 5.0 Sqm each shutter, with greasing, oiling , welding riveting, pivets, hinges , ball bearing, top cover, anchoring rod and proper allinment of locking arrangement of shutter incl refixing of hood top cover etc and making smooth functioning, complete all as spd & directed

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane incl hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds complete complete all as specified .

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and shown in drg in SSR Part -II 2020 complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS frame shall be covered with heat moulded plain cover PVC C channel having a PVC sheet strip of 20mm with struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail and either side as gap inserted for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading sheet and jointed together with solvent cement in frame at site as per specification and shown in drg in SSR Part -II 2020 complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed .

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified

S&F 150 mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge.

S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple complete all as specified and directed.

S & Fixed in repair door closer Hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kgs of aluminium extruded section complete all as specified and directed.

M & L fixed in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in Powder coated aluminium sliding window with shutter styles 40mm x20 mm sheet thickness 1.2mm two shutter of glass and one shutter of wire mesh consisiting of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 91.80mmx31.75mmx1.2mm thick section (three track) with or without rebate. 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engineer-in-Charge.

Taking down aluminium door/window shutters any size and Refixing the same after repair / replacement of hinges/ rubbers packing, alinement of shutter and builders hardware to same position all as per direction of Engg in charge Note: the rate inclusive of builders hardware required for easy functioning of aluminium shutter complete all as specified and directed

S & F in repair 100 mm brass Mortice lock 4 leavers vertical type fixed complete all as directed

S & F in repair 12mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips and fixed in repairs.complete all as specified and directed

Supply & fixed (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges complete all as specified

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest, including concrete bedding with trap 100mm complete all as specified and directed

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density , complete all as specified and directed.

S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed.

S&F in repair CP Stop cock/ Angle cock 15mm fancy type choromium plated etc, complete all as specified and as directed.

S&Fin repairs pillar taps cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered hot or Cold with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected.

S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified .

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair CP jet spray fixed wirth EWC complete with all assembly as directed.

S & F in repairs brass CP wall mixture for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed

S & F in repair 15 mm dia concealed type Stop valves,chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed

M&L in repair 32mm dia bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed

S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type, 60 cm long between flanges complete all as specified and directed.

M & L PVC floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall or in floor complete all as specified and directed .

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall or in floor complete all as specified and directed

S&F of PVC bends of any radius 110mm dia bore complete all as specified and directed .

S&F of PVC bends of any radius 75 mm dia bore complete all as specified and directed .

S & F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair 15 mm dia steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, complete all as specified and as directed.

S&F in repair 20mm dia, steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, complete all as specified and as directed.

Dismantling PVC water tanks and removing from site capacity for exc 500 ltrs but n. exc 1000 ltrs complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tank 1000 ltrs capacity double layered cylindrical vertical with closed top hoisted and fixed in position including fittings all as spd

Schedule of Credit

M/S J.S.ENTERPRISES (BID ID -3520818)