Repair to roof, flooring, ceilling, joinery, sanitary fittings, plumbing, plastering, sunken floor, internal water supply and certain other misc B/R works at JCOS/ORS Md accn at Aurangabad under GE(S) Ahmednagar

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth in hard/dense soil for foundation etc and getting out complete all as specified and directed.

Returning, filling including spreading, levelling watering and well ramming in layers not exc 25cm in soil complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Moorum filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Hardcore of gauge exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

Excavation in post holes or similar holes each n exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble in soft/loose soil complete all as specified and directed.

Dismanlting floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviciable tiles to store and rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tile 7 to 8 mm thick area of each tile exceeding 0.06 but n. exc 0.11 Sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar 1:6 set & jointed in neat cement slurry with tile adhesive as per manufacturer instruction and pointed in coloured cement to match complete all as specified and directed.

All as above Item No. 08 work but on verticle surface as skirting/dado over 10 mm thick plastering in CM 1:4 on brick or concrete surface complete all as specified and directed.

Glazed Ceramic coloured tiles of area exc 0.11 Sqm but nexc 0.16 Sqm and 6 to7 mm thick over and including 10 mm thick plastering in CM 1:4 on vertical surfaces such as in skirting/dado with tile adhesive as per manufacturer instruction complete all as specified and directed.

Dismantling of bricks ( laid flat or on edge ) or brick tiles and interlocking tiles in floors, channels, kerbs,apron etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

75 mm thick PCC 1:4:8, type D-2 (40mm graded aggregate) as in floors and pavings including finishing surface complete all as specified and directed.

100 mm thick PCC 1:4:8 type D2 (using 40 mm graded aggregate ) as in sub-base complete all as specified and directed.

Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 60 mm thick as in floor /pavement laid on 25 mm thick stone dust/sand cushioning laid dry to the profile all as directed and as per manufactures instruction complete all as directed by Engr-in- Charge.(sand/dust will be measured and paid seperately) complete all as specified and directed.

Sand cushioning / Sand filling under floors or in foundations including watering, lavelling and consolidation complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 17 here-in-before but as in skirting Including 10 mm thick backing coat of plaster in CM 1:4 complete all as specified and directed.

Precast cement concrete Coloured chequered tiles with Glossy finished of size 25cm x 25cm x 25mm thick, machine pressed with grey cement and pigment, set, jointed and pointed in neat cement slurry with grey cement and pigments over and including 20 mm thick screed bed or bedding layer of cement morter 1:6 etc pointed in coloured cement to match the tiles complete all as specified and directed.

PCC 1:3:6, type C1 (using 20 mm graded aggregate) as in side locking of interlocking paver block including slightly rounded or chamfered angles, throating and necessary form work complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc. vertical or to batter with rough finished surface complete all as specified and directed.

75 mm thick PCC 1:3:6, type C-2 (40mm graded stone aggregate) as in Plinth protection including finishing surface complete all as specified and directed.

PCC 1:2:4, type B1 (using 20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in Cement mortar/ Cement lime mortar including all quoins, arches, pillars, etc complete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan n exc 6m redius in CM 1:6 complete all as specified and directed.

All as per item No. 25 but except bricks in CM (1:6) complete all as specified and directed.

Precast cement concrete block masonry with solid blocks in precast PCC (1:5:8), exc 10 cm width built in CM 1:6 complete all as specified and directed.

Walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

All as per item No. 28 above but except stones built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

15 mm thick rendering in CM 1:4 on stone masonry surfaces or other than fair face of brick surface finished even and smooth (without using extra cement) complete all as specified and directed.

10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

5 mm thick rendering in CM 1:4 on fair faces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Raised pointing in CM 1:3 to random or polygonal rubble, un coursed or brought up to courses complete all as specified and directed.

Preperation of new plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

Preparation of new plastered wall surfaces and applying of two coat of distemper oil emulsion over a coat of 3 mm thick wall care putty on walls complete all as specified and directed.

Preparation of new plastered wall surfaces and applying of two coat of distemper oil emulsion over a coat of 3 mm thick wall care putty on ceilings complete all as specified and directed.

Complete removal of existing treatment and applying three coat of white wash on wall surfaces complete all as specified and directed.

Complete removal of existing treatment and applying three coat of white wash on ceilings surfaces complete all as specified and directed.

Granite of any type work (table rubbed and polishing) in steps, jambs, pillars, window cill, cooking platform and like in CM (1:4) including pointing to white cement (1:2) using marble dust with admixture of pigment to match the shade of granite inclusing 15 mm thick sreed bed in CM 1:6 complete all as specified and directed.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

Machine cut cudappa stone slab 20-25 mm thick over and including 15 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, polishing complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Precast cement concrete 1:2:4 type B-1 using 20 mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crankng, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 5 mm dia and over mm dia and over upto and including 10 mm dia, cut to length, bent to shape required, including crankng, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacers and binders complete all as specified and directed.

Disconnecting existing tanks, exc 250 and not exc 500 Ltrs capacity, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixng in position including cleaning and removing all scales and dirt etc from mouths circulating pipe etc complete all as specified and directed.

All as per item No. 47 above but exc 500 and not exceeding 1000 ltrs capacity complete all as specified and directed.

All as per item No. 47 above but exc 1000 and not exceeding 2000 ltrs capacity complete all as specified and directed.

Polythene water tank's cover including lid for any capacity of tanks fixing with necessary device complete all as specified and directed.

Ball valves high pressure of 15mm bore of pipe.PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs, (minium weight 142 gms) complete all as specified and directed. Make :- Prayag or Symet.

Ball valves high pressure of 20 mm bore of pipe.PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs, (minium weight for 210 gm) complete all as specified and directed. Make :- Prayag or Symet

Ball valves high pressure of 25 mm bore of pipe PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs, (minium weight for 455 gm) complete all as specified and directed. Make Prayag or Symet.

Gun metal globe or gate valves 15 mm bore with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

Gun metal globe or gate valves 20 mm bore with iron wheel head, screwed both ends for iron pipe,fixed in repairs complete all as specified and directed.

Stop valves 15 mm bore, cast copper alloy, chromium plated, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

Stop valves 20 mm bore, cast copper alloy, chromium plated, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

15 mm bib taps,Chromium plated, screwed down screwed for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.

15 mm pillar taps, chromium plated, screwed down high pressure, with or without lettered `Hot' or Cold with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as specified and directed.

Rotational moulded polytethne storage tanks Tripple layered, 500 litres capacity (cylinderical vertical with closed top), ISI marked. hoisted and fixed in position as in repairs all as specified in SSR Part- I complete for the following all as specified and directed :-

Rotational moulded polytethne storage tanks Tripple layered, 1000 litres capacity (cylinderical vertical with closed top), ISI marked. hoisted and fixed in position as in repairs all as specified in SSR Part- I complete for the following all as specified and directed :-

Rotational moulded polytethne storage tanks Tripple layered, 1500 litres capacity (cylinderical vertical with closed top), ISI marked. hoisted and fixed in position as in repairs all as specified in SSR Part- I complete for the following all as specified and directed :-

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 15 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 20 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 25 mm bore pipe complete all as specified and directed.

15 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors as in repairs complete all as specified and directed.

20 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors as in repairs complete all as specified and directed.

25 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors as in repairs complete all as specified and directed.

Refixing old GI steel tubing 15 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

Refixing old GI steel tubing 20 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

Refixing old GI steel tubing 25 mm bore and connections in new or old position (Walls, ceiling,floors, etc) complete with all new fittings and concealed in walls or laid in floors etc complete all as specified and directed.

PVC Connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

PVC low level flushing cistern, 10 ltrs capacity including ball valve, bracket inlet, PVC pipe, PVC connection 600 mm long etc. fixed in repair complete all as specified and directed.

Special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade 1:3:6 filling, floor area of WC upto 1.5 Sqm etc. complete all as specified and directed by Engineer-in-Charge. Note- The rates incl for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm all as specified and directed

Water closets, Vitreous China, Orissa Pattern, size 580 x 440 mm, White integral foot rest incl `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan ( padestal pattern) any colour P or 'S' trap with and including plastic seat cover and PVC cistern of capacity 10 ltrs with connections complete all as specified and directed.

Vitreous China wash hand basin White 580 x 450 mm size flat back incl cutting for and pinning in ends of brackets, waste coupling and waste & vent pipe, fixed in repairs all as specified and directed.

Vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe and bent pipes) including pair of brackets, PVC waste & Vent pipe, and connection fixed in repairs complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors, as in repairs, complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors, as in repairs, complete all as specified and directed.

PVC (SWR) bends any radius with access door of 75 mm bore,fixed in repairs complete all as specified and directed.

PVC (SWR) bends any radius with access door of 110 mm bore,fixed in repairs complete all as specified and directed.

PVC (SWR) junction of 75 mm bore single, (single T) equal or unequal with access door, fixed in repairs, complete all as specified and directed.

PVC (SWR) junction of 110 mm bore single, (single T) equal or unequal with access door, fixed in repairs, complete all as specified and directed.

PVC (SWR) branch piece of 75 mm bore ,double (double Y) equal or unequal fixed in repairs, complete all as specified and directed.

PVC (SWR) branch piece of 110 mm bore ,double (double Y) equal or unequal fixed in repairs, complete all as specified and directed.

PVC (SWR) 75 mm bore vent cowl fixed in repairs, complete all as specified and directed.

PVC (SWR) 110 mm bore vent cowl fixed in repairs, complete all as specified and directed.

75 mm dia cast iron floor trap plain with CP gratings including jointing with solvent cement and setting in and including PCC 1:2:4, type B1 complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.includind down take pipe and coupling CP complete fixed in repairs complete all as specified and directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) exc 1.50sqm & n.exc 4.00sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) n.exc 1.50sqm each and removing from site and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

Pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete of size of frame 105x60mm complete all as specified and directed.

2nd class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Second class hardwood, 35 mm thick,factory made , plain framed ,panelled shutter (two panels ) with panel of 9 mm thick BWP plywood bonded with high quality phenol formal dehyde synthetic resin adhesive confirming toIS-710. the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified and directed.

Second class HW, 35mm thick, gauged & skeleton shutters, factory made open rebated and prepared to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc., size of members of shutter shall be as spd in SSR 1991 Part-I, Member shall be kiln seasoned as IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplied & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing on page 146 of SSR pt II 2004 complete all as specified and directed.

Taking down old steel window /ventilator of any size & type all as specified and directed complete all as specified and directed.

Factory made steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Factory made steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay complete without glazing bar with & including fixing flat iron for securing wire mesh complete all as specified and directed.

MS framed guard bars confirming to Fe-290-0 or Fe-330-0 welded to steel ventilators & window complete all as specified and directed.

Steel ventilator with top hung shutter incl hinges, steel peg stays etc complete all as specified & directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm and refixing in the same opening complete all as specified and directed.

Mild steel butt hinges, medium weight, colled rolled ISI marked of size 100mm complete all as specified and directed.

300 mm long rat tail rod pattern door spring incl roller and roller plate complete all as specified and directed.

Aluminum anodised barrel tower bolt 150 mm long of extruded section & fixed complete all as specified and directed.

Aluminum handle 125 mm long fabricated type anodised complete all as specified and directed.

Aluminum handle 125 mm long fabricated type anodised all as per item above but fixed in repairs complete all as specified and directed.

Mild steel pressed handles 150 mm oval type, stoves enamelled complete all as specified and directed.

Mild steel pressed handles 150 mm oval type, stoves enamelled fixed in repairs complete all as specified and directed.

Mild steel sliding door bolts clip type 300 mm long stove enamelled black with bright bolt not less than 16mm dia with & incl a minimum of 6 bolts & nuts four on bolt plate and two on staple plate complete all as specified and directed.

250 mm in length Aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

Galvanised mild steel wire cloth 0.50 mm nomonal dia of wire & avg width of aperature 1.18 mm & fixed with wooden beads / tinned tacks or galvanised wire staples & fixed in repairs to steel / wooden frame complete all as specified and directed.

Hacking out only old, broken glass (any thickness ,size quality or description) from wooden / metal frames incl punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass n.exc 0.50 sqm in each pane complete all as specified and directed.

Figured glass pin headed type 3mm thick & glazing with oil putty in square n.exc 0.50 sqm in each pane of metal frame complete all as specified and directed.

18/19mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing with lamination,fixed wih screws to timber frame work or as in pelmet complete all as specified and directed.

Continuous (Piano) hinges mild steel bright finish or electro galvanized of 30mm width of flaps (when opened) complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth & applying two cots of synthetic enamel paint over one coat of primer complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

PCC 1:2:4 type B2 (40mm graded stone agg) as in foundation filling and mass concrete for post holes complete all as specified and directed.

Dismantling timber fillets, rails posts rafters not exc 40 sqcm in section complete all as specified and directed.

Second class hard wood plain fillets square, rectangular in section clean sawn, secured with nails exc 13 sqcm but n exc 25 Sqcm of sectional area complete all as specified and directed.

Second class hard wood plain fillets square, rectangular in section clean sawn, secured with nails exc 13 sqcm but n exc 25 Sqcm of sectional area but except fillets complete all as specified and directed.

Dismantling boarding of any description, fixed in any position with nails complete all as specified and directed.

4 mm thick AC building board as in ceiling with screws fixed to timber frame work complete all as specified and directed.

All as per item No. 130 here-in-before but fixing only.

Mild steel work in tubular pipes as in posts, purlins, rafters etc incl special shaped washer etc complete using ERW or including welding, cutting complete all as specified and directed.

6 to 8mm thick MS plates as in base plate, gussset in square incl welding, cutting & drilling complete all as specified and directed.

Rolled mild steel sections as in purlins in connecting with common rafters fixed with angle cleat Fe-410-W complete all as specified and directed.

Dismantling of AC sheet (corrugated, semicorrugated etc) in roof covering including ridges complete all as specified and directed.

Dismantling plain or corrugated steel sheetings of any gauge or thickness complete all as specified and directed.

6 mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with L type or J type or cranked hook bolts complete all as specified and directed.

All as per item No. 137 here-in-before but fixing only.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scanting 40 Sqcm & over in section in any position and in framed work complete all as specified and directed.

Second class hard wood clean sawn as in scantling, timber fixed complete all as specified and directed.

All as per item No. 142 above but except timber.

M/s.M G Kulkarni

sonu enterprises

M/s.Abhay Kulkarni and Associates