Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹23.6 L+₹3.5 L (17.3%)Rejected-Finance 503 GIRIRAJ HEIGHT VAITY WADI L B S MARG NEAR HARINIWAS CIRCLE THANE 400 602 | THANE | MAHARASHTRA | 400602 | L2 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹24.9 L
EMD Value
₹50,000
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
P Bangar Raju,IDSE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
PERIODICAL SERVICES TO CERTAIN BLDGS UNDER ZONE A D E AND NSB AT INS SHIVAJI LONAVLA
2023_MES_602817_1
GE/LONAVLA/8151/E8
Open Tender
Civil Works
Item Rate
330 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹50,000
Yes
9 Oct 2023
12 Jun 2023
17 Jul 2023
12 Jun 2023
15 Jul 2023
27 Jun 2023
12 Jun 2023 - 26 Jun 2023
Amount
M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on the walls, pillars, cornices etc complete all as specified and as directed.
All as per Srl Item No 1 here-in-before but on ceiling
All as per Srl Item No 1 here-in-before but one coat of cement base paint
All as per Srl Item No 1 here-in-before but two coat of cement base paint
All as per Srl Item No 1 here-in-before but one coat of oil bound distemper
M&L for complete removal of existing treatment of old painted wall surfaces and applying 3.00 mm thick white cement based wall care putty smooth finish.etc of approved make & shade on walls and other places complete all as specified and as directed.
M&L for applying one coats of priming with alkali resistant priming paint over the putty surface and pproved make & shade on walls etc, complete all as specified and as directed.
M&L for applying two coats of oil bound distemper over the primer surface of approved make & shade on walls etc, complete all as specified and as directed.
M&L for preparation of old painted surfaces of wall and applying one coat of exterior grade, weather resistant antifungal acrylic latex paint complete all as specified and directed.
Complete removal of existing treatment of external surface of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush,cleaning, washing and removing dust, . Cracks less than 2 mm, should be cleaned free of dust with a vaccum cleaner and apply Dr. Fixit Primeseal (Efflorescence resistant penetrating primer.) let it dry. Then pour Dr. Fixit Raincoat into these cracks and wait for it to dry Apply the first coat of Dr. Fixit Raincoat without any dilution at the rate of 2 sqm per litre and allow it to dry before taking up the second and third coats, the rate of application being the same, Drying time between coats will be 6 to 8 hrs, A total thickness of 1 to 1.2 mm must be achieved when Dr. Fixit Raincoat is dry and including necessary scaffoldings etc , complete all as specified and directed Note:- Application of primer and paint shall be done by the authorised applicator of the manufacturer of the paint and a certificate to this effect shall be produced by the contractor.
M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free ) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed. Make:- Dr fixit /Berger / Perma
M&L for preparation of old painted wood surfaces of any description having width/ girth execeeding 10cm and apply one coat of synthetic enamel paint complete all as specified & as directed.
M&L for preparation of old painted wood surfaces of any description having width/girth execeeding 10cm and apply two coats of synthetic enamel paint complete all as specified and as directed.
M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description having width or girth exceeding 10 cm and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L for rendering in patches 10 mm thick in cement mortar 1:6 on walls and finished even and smooth without using extra cement including taking down cement plaster on brick/concrete surfaces and raking of joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering in patches 5 mm thick in cement mortar 1:3 as in ceiling and finished even and smooth without using extra cement including taking down cement plaster on brick/concrete surfaces and raking of joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M/L for rendering in patches 15 mm thick in cm 1:4 using readi plaster on external surface of brick walls surfaces mixed with water and all as per manufacturer instructions etc, finishing the surface even and smooth without using extra cement and including taking down cement plaster on brick/concrete surfaces and racking out joints, hacking for key scrubbing down with water and necessary scaffoldings etc , complete all as specified and directed . Make:- Ultra Tech / Silico / Renaplast/Kaneria
M&L for preparation of newly plastered roof surfaces thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles. Cracks less than 2 mm shall be sealed with "Pidilite URP" manufactured by Dr Fixit or with "Plaster seal" manufactured by STP and cracks more than 2 mm and less than 5 mm shall be sealed with " crack X wooder" manufactured by Dr. Fixit or " Plaster seal" manufactured by STP and applying primer and two coats of water proof decorative elastomeric coating of approved shade/colour complete all as specified and as directed. Note :- (i) Primer shall be " Prime seal "manufactured by Dr. Fixit" or "Plaster seal" manufactured by STP. (ii) Water proof decorative elastomeric coat shall be Rain coat DFT 100 manufactured by Dr Fixit or shalicry 215 manufactured by STP. (iii) The rate of application of primer and waterproofing coat shall be as per manufacturers instructions. (iv) A time gap of eight hours shall be maintained between the application primer and each water proof coat after application of sealant. (v) Unit rate quoted shall be deemed to include for necessary scaffolding for execution of the same. (vi) Application of primer and paint shall be done by the authorised applicator of the manufacturer of the paint and a certificate to this effect shall be produced by the contractor.
M&L for preparation of new plastered surfaces on ceiling and applying three coat of white wash etc complete all as specified and directed
M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 3.00 mm thick white cement based wall care putty complete all as specified and as directed. Note:- Application of primer and paint shall be done by the authorised applicator of the manufacturer of the paint and a certificate to this effect shall be produced by the contractor.
M&L for obilatering old writing of any description, n exc 0.1 sq m, with paint to match existing work complete all as specified and as directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specified and as directed.
M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc complete all as specified and as directed. Note for Sl item No 1 to 24 :- (i) Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (ii) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (iii) Unit rate quoted shall be deemed to include for necessary shifting of tables, movable cupboards and other articles required for execution and placing in same position after completion of the work. (iv) Unit rate quoted shall also include for removing of nails, making good holes, cracks etc to match with the existing surfaces. (iv) The user unit will be handed over the qty of material contracted by the MES and same will be issued to the contractor for External periodical services by the user unit.
United Engineers and Contractors
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .