SPECIAL REPAIRS TO EXISTING PATHWAY AT VAJRA MARG UNDER GE EAST JALANDHAR

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level), all as directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified & directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and in 1.5 m in depth and getting out in soft/loose soil, complete, all as directed.

M&L for 150mm thick (spread thickness) moorum filling for berms, spread, rolled and compacted to required gradient & comber, complete all as specified & directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement. 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified & directed .

Removal excavated surplus soil to a distance not exc. 50 m and depositing where directed at level nexc. 1,5 m above the starting point, all as directed.

M & L for hardcore of of broken stones of gauge not exc 63 deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface, complete all as specified & directed .

M&L for 100mm thick cement concrete 1:3:6 , type C2 (using 40mm graded stone aggregate) as in sub base, complete, all as specified & directed.

Supply and laying only coarse sand for providing sand bedding under interlocking paver blocks.

Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of any shape & size confirming to IS 15658-2006 of M-40 grade with approved colour (red or yellow), design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, made by table vibratory method using PU mould, laid in required colour & pattern over compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Note: Sand for sand bedding shall be measured and paid separately.