Construction of Toilet Complex at Surat Singh Mohalla W.No. 3

Amount

Earth work in excavation by manual means in trenches for foundations, drains,(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. A). All kinds of soils

Providing and laying in position cement concrete (1:5:10)mix in foundation &plinth using 20mm Nallah stone aggregate with leads and lifts complete job

Random Rubble Masonary with hard stones of approved quality in foundation and plinth i/c levelling with 1:6:12 mix with20mm nominal size aggregates.

Providing and laying damp proof course in position cement concrete (1:2:4) mix in foundation &plinth using 20mm Nallah stone aggregate.

Providing and laying damp proof course 50 mm thick with cment concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size ( Crushed )

Dry Random Rubble Masonary with hard stones of approved quality in foundation and plinth with20mm nominal size aggregates.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm N. size)

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars including all carriges

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand)

P/F of Ceramic Glazed tiles of size 600x600mm thickness to be verified by the manufacturer.

Centring and shuttering including strutting propping etc. and removal of form for :-Foundations, footings, bases of columns etc for mass concrete

Suspended floors, roofs, landings, balconies and access platforms.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Edges (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

P/F of 1mm thick MS Steel doorwith frame of 40x40x6mm angle and 3mm MS Gusset plates at junctions and corners i/c priming coat using flats 30x6mm for digonal braces.

Structural Steel in Built up sections ISA 40X40X6 MM doors and ventilator frames

Distempering with Oil bound washable distemper of approved brand and manufacture to give an even shade.

P/F of G.I pipes complete with G.I fittings

P/F of Brass Bibcock of approved quality

P/F of White Vitrous China water closet Pan (Indian Type) of approved quality

Provision for Citizen Information board

GHULAM RASOOL LONE

M/s AJAY SINGH BALI