Loading
Loading…
Loading…
Tender Value
₹70.4 L
EMD Value
₹1.4 L
Closing Date
27 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
15 conditions · 4 needing a document upload
Financial Eligibility Criteria:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
1 Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling th
Similar Nature of Work means-: "Execution of 25 kV AC or 1500 V DC Traction Sub-station or Traction switching station or execution of HT substation work of equivalent or higher grade voltage "
Tenderer has to submit attested copy of valid electrical contractors license as per IE rule 45, which can be in his own name or in the name of his firm
4 conditions · 2 needing a document upload
E. New Annexure - V(A), Part I of GCC shall be read as under Annexure - V(A), Reference - Para 6.1 of ITT (This certificate is to be given by attorney /authorized signatory /each member of Partnership firm /Joint Venture (JV) / Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc.) I/We.....................................................(Name), attorney /authorized signatory of the ......................................... (constituent firm/constituent partner) and member/partner of the ............................................. (tenderering firm) hereby solemnly affirm and state as under: 1.I/we certify that .................................................. (constituent firm /constituent partner) is /are not blacklisted or debarred by Railway or any other Ministry /Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/member of the partnership firm/LLP/JV/Society/Trust. 2.I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am /We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfill all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by th competent authority is enclosed), SEAL AND SIGNATURE OF THE CONSTITUENT FIRM/CONSTITUENT P A R T N E R Place :_________________________ Dated:_____________________________
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical Contractor License :- For participating in tenders for a work in any state the Contractors shall have to possess electrical license of appropriate voltage issued by any State Govt. under Clause 45 of compilation of rule of Indian Electricity Rules 1956 or as amended from time to time and a copy of the same should be submitted along with the offer. They shall keep valid license throughout the period of execution of work by getting it renewed at suitable intervals and submit an attested copy of the same to the Railways after each renewal. In the event of any discontinuity in validity of electrical license of the contractor, its authority to work with Railways will also automatically cease to be valid.
Design, Supply, Erection, Testing & Commissioning of 25 KV AC Provision of 3rd Feeder bay in connection with Amreli-Khijadiya Gauge Conversion work of Bhavnagar Division of Western Railway.
EL-C-RJT-2025-2026-TRD-01~WR
EL-C-RJT-2025-2026-TRD-01
Open
Works - General
3 Months
Mumbai, Maharashtra
₹0
₹1.4 L
27 Jan 2026
2 Jan 2026
13 Jan 2026
127 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 70,39,791.99 | ||
| — | 1.00 | — | — | ||
| Preparation of Design and Drawing for switching stations along with alterations in General supply diagram and sectioning | — | — | — | 78,700.08 | |
| — | 60.00 | — | — | ||
| Concrete for foundation and plinth as per technical specification and explanatory note | — | — | — | 4,32,752.4 | |
| — | 15.00 | — | — | ||
| Renforced concrete for foundation and cable trench as per technical specifications | — | — | — | 1,53,326.7 | |
| — | 30.00 | — | — | ||
| Renforced concrete for cable trench cover as per technical specifications | — | — | — | 74,071.5 | |
| — | 30.00 | — | — | ||
| Supply, Spreading and leveling of 20 mm down graded ballast, pedding 150 mm in the switch yard. | — | — | — | 49,486.8 | |
| — | 4.00 | — | — | ||
| Supply of steel gantries/Portals/Mast and supporting | — | — | — | 5,12,151.28 | |
| — | 4.00 | — | — | ||
| Erection of steel gantries/Portals/Mast and supporting structures and small parts steel work | — | — | — | 30,779.12 | |
| — | 40.00 | — | — | ||
| Supply of 50 mm GI pipe N.B | — | — | — | 18,665.6 | |
| — | 40.00 | — | — | ||
| E , T & C of 50 mm GI pipe N.B | — | — | — | 648.4 | |
| — | 1.00 | — | — | ||
| supply of 25 KV VCB as per technical specification | — | — | — | 7,70,215.98 | |
| — | 1.00 | — | — | ||
| E ,T & C of 25 KV VCB as per technical specification | — | — | — | 12,644.98 | |
| — | 1.00 | — | — | ||
| Supply of 25 KV single pole vaccum Intrupter | — | — | — | 4,69,181.92 | |
| — | 1.00 | — | — | ||
| E , T & C of 25 KV single pole vaccum Intrupter | — | — | — | 12,537.07 | |
| — | 1.00 | — | — | ||
| Supply of Double pole isolator 1600 Amps with interlocking mechanism as per technical specifications | — | — | — | 1,38,204.05 | |
| — | 1.00 | — | — | ||
| E , T & C of Double pole isolator 1600 Amps with interlocking mechanism as per technical specifications | — | — | — | 8,571.12 | |
| — | 1.00 | — | — | ||
| Supply of 25 KV Current Transformer CT ratio: (1500-750) as per technical specifications | — | — | — | 1,24,452.95 | |
| — | 1.00 | — | — | ||
| E ,T & C of 25 KV Current Transformer CT ratio: (1500-750) as per technical specifications | — | — | — | 2,029.26 | |
| — | 1.00 | — | — | ||
| Supply of Control and Relay panel(suitable for one feeder CB) along with modification in existing SCADA system at RCC and controlled post as per latest RDSO specification. | — | — | — | 28,10,604.36 | |
| — | 1.00 | — | — | ||
| E, T & C of Control and Relay panel(suitable for one feeder CB) along with modification in existing SCADA system at RCC and controlled post as per latest RDSO specification.Due to provision of additional 25 KV VCB. | — | — | — | 90,826.06 | |
| — | 4.00 | — | — | ||
| Supply of material for single earth electrode as per technical specification and explanatory notes | — | — | — | 18,257.92 | |
| — | 4.00 | — | — | ||
| E, T & C of material for single earth electrode as per technical specification and explanatory notes | — | — | — | 8,542.52 | |
| — | 50.00 | — | — | ||
| Supply of 50x6 mm GI Flats as per technical specifications | — | — | — | 10,838.5 | |
| — | 50.00 | — | — | ||
| E , T & C of 50x6 mm GI Flats as per technical specifications | — | — | — | 3,770.5 | |
| — | 40.00 | — | — | ||
| Supply of 75 x 8 mm GI Flats as per technical specifications | — | — | — | 17,802 | |
| — | 40.00 | — | — | ||
| E , T & C of 75 x 8 mm GI Flats as per technical specifications | — | — | — | 3,344 | |
| — | 1.00 | — | — | ||
| Suooly of 25 KV potential Transformer Type II as per technical specification | — | — | — | 90,435.83 | |
| — | 1.00 | — | — | ||
| E , T & C of 25 KV potential Transformer Type II as per technical specification | — | — | — | 2,736.01 | |
| — | 1.00 | — | — | ||
| Supply of PT Type -I | — | — | — | 86,221.05 | |
| — | 1.00 | — | — | ||
| E , T & C of PT Type -I | — | — | — | 2,460.57 | |
| — | 16.00 | — | — | ||
| Supply of 25 KV post/support Insulator | — | — | — | 1,21,294.72 | |
| — | 16.00 | — | — | ||
| E , T & C of 25 KV post/support Insulator | — | — | — | 11,037.76 | |
| — | 50.00 | — | — | ||
| Supply of Bus-Bar(Aluminium) 50 mmx39 mm as per technical specifications | — | — | — | 34,085 | |
| — | 50.00 | — | — | ||
| E, T & C of Bus-Bar(Aluminium) 50 mmx39 mm as per technical specifications | — | — | — | 10,310 | |
| — | 1.00 | — | — | ||
| Supply of 42 KV Lightning arrestor with surge counter meter(staion Class) and disconnector assembly as per technical | — | — | — | 48,794.42 | |
| — | 1.00 | — | — | ||
| E , T & C of 42 KV Lightning arrestor with surge counter meter(staion Class) and disconnector assembly as per technical | — | — | — | 1,510.41 | |
| — | 40.00 | — | — | ||
| Supply of copper strip(25x3 mm) for equipment earthing as per technical specification | — | — | — | 27,546.8 | |
| — | 40.00 | — | — | ||
| E , T & C of copper strip(25x3 mm) for equipment earthing as per technical specification | — | — | — | 920 | |
| — | 300.00 | — | — | ||
| Supply of control and indication Copper cable as per technical specifications(7x2.5 sq mm Cu) | — | — | — | 53,547 | |
| — | 500.00 | — | — | ||
| Supply of 2x4 sq mm cable for 240 Volt Heater supply(copper) as per technical Specifications | — | — | — | 31,070 | |
| — | 300.00 | — | — | ||
| Supply of 2x2.5 sq mm copper catenary indication cable as per technical specifications | — | — | — | 18,429 | |
| — | 1100.00 | — | — | ||
| Erection testing and commissioning of 7x2.5,2x2.5,2x4 sq mm PVC insulated stranded copper cables as per explanatory note. | — | — | — | 15,620 | |
| — | 10.00 | — | — | ||
| Supply of large copper jumper 160 mm between cross feeder to OHE | — | — | — | 27,614.2 | |
| — | 10.00 | — | — | ||
| E, T & C of large copper jumper 160 mm between cross feeder to OHE | — | — | — | 1,746.6 | |
| — | 15.00 | — | — | ||
| Supply of Rigid bimetallic terminal connector suitable for 50 mm dia Aluminium tubular busbar to terminal pad of 25 KV Isolator/CT(ID 11090) | — | — | — | 36,209.25 | |
| — | 15.00 | — | — | ||
| E , T & C of Rigid bimetallic terminal connector suitable for 50 mm dia Aluminium tubular busbar to terminal pad of 25 KV | — | — | — | 1,020 | |
| — | 5.00 | — | — | ||
| Supply opf expansion type terminal connector to suit 50 mm dia Aluminium tubular busbar terminal pad of 25 KV | — | — | — | 31,053.75 | |
| — | 5.00 | — | — | ||
| E, T & C of expansion type terminal connector to suit 50 mm dia Aluminium tubular busbar terminal pad of 25 KV CT/Isolator(ID 11060) | — | — | — | 340 | |
| — | 5.00 | — | — | ||
| Supply of 25 KV system rigid Bus splice connector to suit 50 mm O/D Aluminium tube on both ways (ID 11180) | — | — | — | 12,626.25 | |
| — | 5.00 | — | — | ||
| E, T & C of 25 KV system rigid Bus splice connector to suit 50 mm O/D Aluminium tube on both ways (ID 11180) | — | — | — | 340 | |
| — | 5.00 | — | — | ||
| Supply of Sliding clamp for 50 mm O/D Aluminium busbar(ID 11190) | — | — | — | 8,121.75 | |
| — | 5.00 | — | — | ||
| E, T & C of Sliding clamp for 50 mm O/D Aluminium busbar(ID 11190) | — | — | — | 340 | |
| — | 5.00 | — | — | ||
| Supply of Rigid terminal on SI to suit 50 mmO/D Aluminum busbar(ID11200) | — | — | — | 8,736 | |
| — | 5.00 | — | — | ||
| E, T & C of Rigid terminal on SI to suit 50 mmO/D Aluminum busbar(ID11200) | — | — | — | 340 | |
| — | 5.00 | — | — | ||
| Supply of 25 KV system TEE connector to suit 50 mm O/D Aluminium tubular busbar(ID 11150) | — | — | — | 13,146 | |
| — | 5.00 | — | — | ||
| E, T & C of 25 KV system TEE connector to suit 50 mm O/D Aluminium tubular busbar(ID 11150) | — | — | — | 340 | |
| — | 6.00 | — | — | ||
| Supply of Rigid through connector to suit 50 mm dia Aluminium tubular busbar & SPIDER AAC conductor for 25 KV PT Type II(ID 11110) | — | — | — | 15,126.3 | |
| — | 6.00 | — | — | ||
| Supply of Rigid through connector to suit 50 mm dia Aluminium tubular busbar & SPIDER AAC conductor for 25 KV PT Type II(ID 11110) | — | — | — | 330 | |
| — | 3.00 | — | — | ||
| Supply of Rigid terminal connector suitable for 20 mm dia Aluminium conductor to terminal pad of 132 Isolator & 25 KV PT Type I & II (ID 11120) | — | — | — | 7,915.95 | |
| — | 3.00 | — | — | ||
| E, T & C of Rigid terminal connector suitable for 20 mm dia Aluminium conductor to terminal pad of 132 Isolator & 25 KV PT Type I & II (ID 11120) | — | — | — | 224.4 | |
| — | 1.00 | — | — | ||
| Software charges including design,drawing and changing of protocol to support Existing SCADA at RCC,TSS. | — | — | — | 3,07,081.5 | |
| — | 1.00 | — | — | ||
| Supply of 25 KV 3150 A Single pole Isolator | — | — | — | 1,49,010 | |
| — | 1.00 | — | — | ||
| E, T & C of 25 KV 3150 A single pole Isolator | — | — | — | 6,956.4 | |
| — | 100.00 | — | — | ||
| Erection of 150 sq mm hard drawn copper conductor for feeder/ return conductor | — | — | — | 2,750 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AnnexureVA.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
GCCApril2022final.pdf
ATTACHMENT
GCCcorrectionslip1to10.pdf
ATTACHMENT
TRDTender.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .