REPAIR TO LEAKAGE SEEPAGE SUNKEN FLOOR TOILET AND BATHROOM OF 663 ARMY AVN SQN UNDER AGE I CIF K

Amount

Dismantling brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by engineer in charge.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by engineer in charge.

All as per item No 02 above but except bricks complete all as specified and directed by engineer in charge.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by engineer in charge.

M&L Rendring 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by engineer in charge.

M&L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by engineer in charge.

M&L rendering 10mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by engineer in charge.

M&L for Preparation of newly plastrered surface of any description and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed by engineer in charge.

M&L for Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and wall putty complete all as specified complete all as specified and directed by engineer in charge.

M&L for prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by engineer in charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and directed by engineer in charge.

M&L for 25 mm thick PCC 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in sub floor surfaces, complete all as specified and directed by engineer in charge.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed by engineer in charge.

M&L for coloured non skid ceramic tiles 7 to8 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match Shade, pattern, laying etc of tiles complete all as specified and directed by engineer in charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by engineer in charge.

M&L for Rendering 10mm thick in CM 1:3 on stone masonary surfaces, other than fair faces of brick work finished even and fair to receive tiles complete all as specified and directed by engineer in charge.

M&L for Glazed ceramic white tiles 300x200x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade complete all as specified and directed by engineer in charge.

M&L for Glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade complete all as specified and directed by engineer in charge.

S&F stainless steel grating doom 100/75mm dia with or without hole as directed .(Min.weight 25gms) complete all as specified and directed by engineer in charge.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest 'P' or 'S' trap front or back intlet incl provision of PCC 1:2:4 type B1,and provn of lime concrete bedding and making good the dismantled surface and connection flush pipe (rate also including for taking off unhygienic old WC) complete all as specified and directed by engineer in charge. make Hindware/Parryware/ cera.

S&F in repair Vitreous China wash down water closet pan pedestal pattern white incl fixing bolts,include S&F white coloured plastic seat cover,CP brass jet nozzle with 600 long PVC pipe (rate also including for taking off unhygienic old WC) complete all as specified and directed by engineer in charge. make Hindware/Parryware/ cera.

S&F in repair PVC valve less, syphonic action type flushing cistern, low level with inlet, ball valve float and handle including brackets of capacity 10 ltrs incl PVC connection wih brass nut on both ends and PVC flush pipe complete all as specified and directed by engineer in charge.

S&F in repair PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed by engineer in charge.

S&F repair PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed by engineer in charge.

S&F Vitreous china urinals, bowl type flat back, size of 600x 355x265 mm white with grating and union for discharge pipe, PVC waste pipe incl fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws,complete fixing in repair complete all as specified and directed by engineer in charge. make Hindware/parryware/Cera.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm diacomplete all as specified and directed by engineer in charge.

Ditto all as per item No 27 above but 75 mm bore complete all as specified and directed by engineer in charge.

S&F in repair PVC (SWR) bends/ shoes any radius of 110 mm dia complete all as specified and directed by engineer in charge.

S&F in repair PVC (SWR) bends/ shoes any radius of 75 mm dia complete all as specified and directed by engineer in charge.

S&F in repair PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed by engineer in charge.

Ditto all as per item No 31 above but 75mm bore complete all as specified and directed by engineer in charge.

S&F in repairs PVC 'P' or 'S' trap of 110mm dia complete all as specified and directed by engineer in charge.

S&F in repair PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed by engineer in charge.

S&F PVC in repair (SWR) vent cowl of 110 mm dia complete all as specified and directed by engineer in charge.

S&F in reair Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity.ISI Marked incl, 02 Nos tank nipple 20 & 15mm ,ball valves high pressure of PVC with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms) complete all as specified and directed by engineer in charge.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by engineer in charge.

S&F 5mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by engineer in charge.

S & F in repairs 15 mm bore CP bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by engineer in charge.

S & F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by engineer in charge.

S&F in repair 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by engineer in charge.

S&F in Repair Wash basins, Vitreous China (flat back or angle back type) 580x450mm size, including cutting for and pinning in ends of brackets or erecting stand incl waste pipe complete all as specified and directed by engineer in charge.

S&F in repair wooden wall panelling 8mm thick interlocking incl screws, running wooden fillet backside of size 50x50mm at 1mtr centre to centre of panelling type incl rubbing polishing upto mirror finish complete all as specified and directed by engr-in-charge.

S&F in repair wooden cornices of designer pattern of size 35x35mm complete all as specified and directed by engr-in-charge.

M&L for taking out existing old PCC/ brick bats from sunken slab and rendering 15mm thick of side wall of sunken slab and filling PCC 1:2:4 upto 450mm depth incl WPC @200ml per bag of cement to stop existing leakage and seepage and providing spout complete all as specified and directed by engineer in charge. Note : Floor area will be measuerd flat for payment purpose. Note:- Credit schedule has been given separately under tender documents and shall be adjusted in general summary by the deptt. for arriving at net contract sum.

M/S B A Traders

M/S Mashkoor Constructions