COMPREHENSIVE MAINT OF OTM AND MD ACCN IN AOR OF AGE BR II UNDER GE NORTH DELHI CANTT 10

Amount

M&L for non skid ceramic tiles coloured tiles 7mm to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L viterified ceramic tiles 10mm thick square/rectangular light shade texture polished,area of each tiles not exceeding 0.36 sqm, as in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles size 450mm x 300mm x 7mm /350mm x 250mm x 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&L of CPVC pipes 20mm outer diameter SDR 11 & plain / brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

All as per the description srl item No 4 above but with 25mm bore pipe

M&L for cutting chases, pinning in Brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and ctting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F in repairs curtain rods stainless steel powder coated polished 20mm dia including brackets, side stop complete all as specified and directed.

S&F in repairs fancy type chromium plated bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified

S&F in repairs stop cock/angle cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F in repairs 15mm dia central hole basin brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed, complete all as specifed and directed.

S&F in repairs 15mm wall mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifed and directed.

S&F in repairs 15mm sink mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifed and directed.

S&F in repairs 20mm dia brass CP towel rail 600mm long all as specified and directed by Engr in Charge

S&F in repairs CP health faucet hygienic spray 2 in 1 facucet with 1.0m long tube complete all as specifed and directed.

S&F in repairs shower rose fancy type bass chromium plated 125mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.

S&F in repairs vitreous china wash down water closet pan padestal pattern white colour closed pattern including soft closing black seat cover all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity including PVC float valves, PVC connection and out let pipes complete all as specifed and directed.

S&F in repairs water closet squatting pan 'Orissa pattern' 580mm x 440mm, white with integral foot rests including fixing charges of flushing cistern, connection to trap, anti syphonage pipe and provn of lime concrete etc complete all as specified.

S&F in repairs vitreous china wash hand basin white flat back of size 550mm x 400mm including cutting for and pinning in ends of bracketscomplete all as directed and specified.

Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.

S&F in repairs 15mm bore PVC connection pipe of 450mm size with washers complete all as specified and directed.

S&F in repairs 110mm bore PVC, SWR pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc including taking out/dismantling of old pipes complete all as specified.

All as per the description srl item No 23 above but bore of pipe in 75mm.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling gaps wth wall care putty, complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying one coat of cement base paint on external wall surface described complete all as specified and directed.

Cleaning of over head water tanks of capacity 1000 litrs with suction pump removing all scales and finally cleaning with fresh water etc and precaution should take to avoid outlet pipe from blocking and date of cleaning should be mentioned out side tank complete all as specified and directed.

All as per the descripion srl item No 31 but tanks of capacity 500 litrs

M&L for rendering 15mm thick plaster on fair face of brick surface in cement mortar 1:6 mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @ 200 ml/bag of ready mix over two coats of super latex 302 of Dr fixit or equivalent in the ratio 1:4:7 one part super latex 302, 4 part water and 7 part cement @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:4 mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of Ready mix over two coats of super latex 302 of Dr fixit or equivalent. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement including taking down of cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 10mm thick in CM 1:3 on any faces of concrete surfaces finished fair and even without using extra cement in ceiling/ chajja including taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Supply only PD proof 101 LW (+) of Dr Fixit or equivalent, complete all as specified and directed.

Supply only super latex 302 of Dr fixit or equivalent complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 sqm each pane including hacking out complete all as specified and as directed.

S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, colour white cylindrical vertical with closed top hoisted of and fixed in position incuding provn of inlet, out let and over flow connection with tank connection nipple of existing pipe dia including, dismantling existing water tanks etc all as specified and directed. Make : Sintex , polycon , SPL

All as per description srl item No 42 above 1000 ltrs capacity of tanks

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each without taking off shutters from the frame complete all as specified and directed.

All as per description srl item No 44 above but exc 1.5 sqm but n.exc 4sqm each

Taking down shutters of any description exc 1sqm but not exc 2 sqm each and all as directed.

Taking down shutters of any description exc 2 sqm each and complete all as specified and directed.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete, all as specified and directed by Engineer-in Charge.

S&F factory made single extruded WPC wood polymer composite solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 suspension grade, calcium carbonate and natural fibers wood powder/ rice husk/ wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N face & 1100 N edge, minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm + - 0.2mm. Window profile with hollow section with multi chamber. Frame 88mm x 52mm, sliding sash 42mm x 67mm. Slidingmesh sash 42mm x 57mm sliding interlock one vertical length in each shutters 45.5mm x 28mm, glazing bead 24.5mm x 16mm will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame 30mm x 18mm 2 nos, sliding sash 30mm x 18mm, sliding mesh sash 26mm x 10mm profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware touch lock of zinc alloyed white powder coated, steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories including glass area not exceeding 2.00 sqm each complete all as specified and directed.

S&F factory made aluminium window as per TD drg No. CEDZ/D-316 with following specifications: (i)Outer frame of size 40mm x 114mm with 1.3mm thickness, corner 45 degree cut aluminium welded (ii)Center mullion of size 40mm x 65mm (iii)Welded shutter 02 nos of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter (iv)12mm stainless steel 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm stainless steel 202 grade round bar (v) Welded wire mesh shutter(02 nos) of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE (vii) Window shall have provision for installation of window AC/desert cooler and provn of window glass shutter, wire mesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coated three track window two shutters glazed & one shutters wire gauge with frame, glazed with 4mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00mm x 31.75mm x 1.50mm section No 21447 (b) Frame bottom section shall of size 92.00 x 31.75 x 1.50mm section No 21446 (c) Top & side members of shutter section shall be be of size 18.00 x 40.00 x 1.50 section No 21455. (d) Interlock Section of shutter shall be be of size 18.00 x 40.00 x 1.50 section No 21454 (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:- Section Number given above are of make jindal, contractor may use similar section of other make mention in Appx .

M&L for powder coated aluminium grill in repairs of powder coating of minimum 50 micron with aluminium mesh of size 50mm x 50mm with square tube solid 4mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed.

S&F 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified.

M&L preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid door frame 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F 100mm medium weight mild steel butt hinges complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm long extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed.

S&F Stainleless steel handle 75mm fancy type for cub board shutter complete all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed .

S&F continuous piano hinges mild steel hinges bright electro galvanised width of tops 30mm when opened complete all as specified and directed.

Complete removal of old roof treatment incuding cement mortar except mudfushka , brick tile and removal of grass, small trees by picking sweeping, cleaning and washing down with water to remove dust etc incuding removing debries out side MOD land, complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water brushing neat cement slurry with 3.0 kg/sqm and inculding M&L for 15mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per 50kg of cement bag, surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology CET based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index SR of 109 on top of concrete roof surfaces. All cracks up to 3mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of shaliurethane BTD/ sikalastic 560/ smart care damp proof-ultra having coverage @ minimum 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats without dilution of shaliurethane BTD/sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. the materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant Note:- 6 Hrs interval between two coat will be maintained. All auxiliary and accessories involved during application should be supplied by single manufacturer's as a part of system. Make: STP/sika/asian paint or equivalent as approved by GE.

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing, cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

M&L for PCC1:2:4 type B-0 12.5mm graded curshed stone aggregate cement concrete in roof padding, roof kerbs of mud stops, rounded or chamfered on edges complete all as spcified and directed.

Supply only liquid water proofing compound complete all as spcified and directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sqm in section unframed work complete all as specified and directed

Dismantling of timber scantlings, of framed work, from any position & height 40 Sqm and over in section complete all as specified and directed..

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Demolition of cement concrete of any description and in any position unreinforced in ground floors below or above ground level n.exc 15 cm thick and clearing rubbish from site all as directed and specified.

M&L for 40mm thick cement concrete 1:2:4 type B-1 as in floor including surfaces to be finished even and smooth with using extra cement complete all as specified and directed

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

S&F in repairs solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent anf fixing on site on PVC frame as per specifications.

S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

Demolition of brick work built in cement mortar in any position including all quions, arches and pillars etc, complete all as specified and directed.

M&L for brick work masonry with sub class 'B' brick straight orcurved on plan exceeding 6 mtr radius built in cement mortar 1:6 complete all as specified and directed.

M&L welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length all as specified and directed..

M&L for rendering 15mm thick in CM 1:6 other than fair faces of brick/concrete surfaces finished fair and even without using extra cement complete all as specified and as directed..

Repair of aluminium door shutters with chowkhats area exc. 1.5 sqm but n.exc 3.00 sqm taking down, re-setting easing fixing of cleats screws nut, bolts, fixing of hold fasts, fixing of aluminium door stopper, change of PVC rubber beadings, complete repair for smooth functioning of door all as specified and directed.

S&F door closer hydraulically regulated of aluminium die cast body universal type suitable for door shutters 851mm to 1000mm in width and weight between 38 to 60kg of Hydraulic door closer complete all as specified and directed.

M&L 4mm thick aluminium composit panelling boards for partition wall fixed or laid / inserted powder coated anodised aluminium frame work with screws complete all as per manufacturer's instructions and as directed. Note:- Rates including powder coated aluminium frame work of any size for partition wall.

Dismantling wall and ceiling boards fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness including cover fillets & frame work.all as specified and directed.

Providing and fixing false ceiling with semi perforated 12mm thk micro tegular edged GRG false ceiling tiles at all heights with GRG (glass fibre reinforcement gypsum) false ceiling tiles of size 595mm x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (part 4) -1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick galvanized @ 120 grams per sqm including both sides comprising of main- T runners of size 15mm x 32mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15mm x 32mm of length 600mm to form grid module of size 600mm x 600mm, suspended from ceiling using galvanized mild steel items galvanizing @ 80 grams per sqm i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and shape level adjuster of size 85mm x 25mm x 2mm. Galvanised iron perimeter wall angle of size 24mm x 24mm x 0.40mm of length 3000mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the by Engineer-in-charge

Dismantling cup board shelf, partition, wall panelling or similar items including shutter, insulation boards/slabs/blankets any thickness including cover fillets all as directed

M&L for providing cup board/shelves in required sizes at site made out of 18mm to 20mm thick sheet consisting of carcase, 18mm to 20mm thick PWPC sheet & provision of shutters made out of 18mm to 20mm thick WPC sheet all required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-charge.

S&F in repair 12mm thick toughned glass as in railing including neccessary CP fitings and fixtures neccessary cuting & holes moulding and fixed in complete as specified and directed.

M&L for providing and fixing stainless steel grade 304 railing made of tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature where ever required and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement including window grill grade-304 using 10mm thick square bars 100mm centre to centre of weight not less than 0.50 kg/m including necessary frame in rectangular hollow section and accessories for window and ventilator grill/ guard bar complete all as specified and directed.

M&L for 12mm thick POP false ceiling including wire mesh and aluminium framed grid alongwith nuts and bolts as in ceiling fixed with screws as per manufacturer's instructions including reinforced with expanded wire mesh and applying two coats of plastic emulsion paint over a coat of primer on exposed surfaces complete all as specified and directed by Engr - in - Charge. Note : Design of ceiling including cove etc shall be as approved by GE.

M&L providing WPC jallies 24mm thick including fixing materials and frame work & taking down old RCC jallies complete all as specified and directed.

Providing and fixing factory made single extruded wood polymer composite solid decorative type skelton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 suspension grade, calcium carbonate and natural fibers wood powder/ rice husk/wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N face & 900 N edge, minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm 2 and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws all as per direction of Engineer- in- Charge including stainless steel butt hinges and necessary stainless steel screws complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- in- Charge. including stainless steel butt hinges and necessary stainless steel screws complete all as specified and directed.

S&F in repairs 12mm thick toughned glass door shutters of size area exc 1.50 sqm but n exc 6 Sqm, including neccessary floor spring hydraulically regulated, otherside fixed on pivote. CP fiitings and fixtures, CP handles CP locking arrangment, neccessary cuting & holes moulding and fixed in complete as specified and directed.

S&F 18mm /19mm thick factory made WPC board one side prelam kitchen cabinat shutter bend at 90 degree and finish all edges at level for marking edge lipping/ bending as 0.5mm thick lipping at all 4 edges using bending tape etc movlded solid board one side re-laminated for cabinet boxes, corckery almirahs, books shelves etc with self and shutter full size fitted under /above the kitchen cooking platform and other rooms directed including stainless steel handles, channels, hasp & staples tower bolt and other accessories and provn of fixing arrangments etc complete all specified and directed.

S&F factory made PVC frame of size 75mm x 40mm with wall thickness of 4mm made out of extruded 4mm thick plain or prelam PVC sheet reinforced with 15mm x 15mm MS square tube of 19 gauge thickness through out the frame and mitred cut and two corners and jointed with two Nos of 150mm long bracket of 10mm x 10mm MS square tube. The door frame shall be fixed to wall using 8mm / 100mm long M.S screwsthrough the frame by using PVC fasteners. A minimum of 4 Nos. of screws to provided for each vertical member & minimum 2 Nos. for horizontal member etc complete as per manufacturer's specifications and direction

S&F in soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards including all fittings complete all as specified and directed by Engr in charge. Note:- Runner/ channel should be stainless steel 304 grade and load capacity should not be less than 45 kgs

S&F modular cabinet kitchen accessories of stainless steel grade-304, 6mm size rod thickness including :- (i) Perforated cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil pull out tray triple basket layer (ix) dust bin (x) cleaning kit rack of size as per site requirement all specified and directed by Engr in charge

S&F aluminium door shutter with frame 100mm x 45mm x 1.5mm powder coated fixed to wall with steel fastnes min four number each side partly glazed with 5mm thick tinted glass and partly panelled with 8mm thick coloured aluminium composit panels incl rubber beading, joining cleat for fixing in position, 2 numbers aluminium door handle 250mm long, 1 number aluminium barrel tower bolt 200mm long,1 number aluminium floor door spring & one No 4 liver mortice lock of godrej of size 100mm in each shutter will be provided all as specified and directed as per following specifications (a) Vertical members of shutter style section shall be of size 85.00mm x 44.45mm x 1.50mm section No 19560. (b) Top rail top members of shutter section shall be of size 85.00mm x 44.45mm x 1.50mm section No 19581. (c) Lock rail middle member of shutter section shall be of size 150.00mm x 44.45mm x 1.50mm section No 19596. (d) Bottom rail bottom members of shutter section shall be of size 150.00mm x 44.45mm x 1.50mm section No 19584. (e) Glazing clip for securing glass of shutters shall be of 0.80mm thick section No 19370. Standered quality rubber beading shall be used for securing of glass (f) Top, bottom and verticle member of shuttert will be tightened with hexagonal nut and purpusly made bolt of 10mm dia MS round bar threaded on both the end. Note:- Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx C

Paradise Interior (BID ID -3375037)

V r traders (BID ID -3382950)

DEEP ASSOCIATES (BID ID -3375313)

M/S GR construction compony (BID ID -3368535)

QUALITY CONSTRUCTIONS CO (BID ID -3375311)

Rohan Construction Company (BID ID -3375492)