WBPWDTE/EE/BED/NIQ_92/Q of 2023-24

Amount

SITC of Main Fire Alarm Control Panel: Microprocessor based Intelligent Semi Addressable 2 Zone Main Fire Alarm Panel capacity loops 50 Detectors with Power Supply, Loop Card with display of 5" Capacitive TFT Screen with Touch Sensitive Keyboard. Addressability of the Intelligent Panel shall be soft addressed so as to consume minimum time of addressing the system with Detectors and Devices . The Intelligent panel shall be able to give pin point location of all fire/fault conditions. All the multicriteria Detectors as applicable for various areas based on application and design considerations shall be fitted on Loop along with Loop powered Alarm Devices; MCPs and Input /output Modules . The panel shall have in built rectifier, Loop cards,provision for external, LCD unit to indicate Fire/Fault Signal with address. 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. (Approval standards:CE,VdS, EN54; Approved Make: ASES/MORLEY LITE/Autornica/Notifier)

Supply, installation, testing & commissioning of CE, EN Standard, VDS approved Addressable Dual Optical Smoke cum Heat type Multi-Sensor Detector with inbuilt / equal number of additional Isolator for each detector and integral LED status indicator with 360 degree viewing angle. Detector shall communicate for differentiated alarm activation and high tolerance to dust,dirt, temperature fluctuations and air currents. Detector should have unquie address for communication and assigned through panel with Mounting Base as required. (Approval standards:CE,VdS, EN54; Approved Make: ASES/MORLEY LITE/Autornica/Notifier)

Supply, Installation, Testing & Commissioning of Response Indicator, with all other accessories. (Approval standards:CE,VdS, EN54;Approved Make: ASES/MORLEY LITE/Autornica/Notifier)

Supply, installation, testing & commissioning of CE,EN Standard, VDS approved Inteliigent addressable manual call point with inbuilt / equal number of additional Isolator for each manual call point suitable for flush or surface mounting, call point shall include test key feature without removing the glass. (Approval standards:CE,VdS, EN54; Approved Make: ASES/MORLEY LITE/Autornica/Notifier)

Supplying, Installing, Testing & Commissioning of Beam Detector With input module along with all other necessary accessories.Approved Make: ASES,System Sensor/Autornica)

Supply & Drawing of 2 Core 1.5 sq.mm FRLS copper Cable. (Make. Finolex / Polycab/Technoflex / MEM/KEI) with

SITC of 25 mm NB FR PVC rigid conduit pipe on the surface of the wall. (Make: Precisson/Primco Plast/AKG or any ISI brand).

TAPAN KUMAR SARKAR

UJJWAL MUKHERJEE