REPAIR/ MAINT OF STEEL AND WOODEN FURNITURE AND ITS PAINTING/ POLISHING AT BASE HOSPITAL/ BSO FURNITURE YARD UNDER GE (E/M) BHDC-10

Amount

Almirah Large steel With Shelves and 1/2 Hanging, 1/2 Shelves (FD-1031, FD-114, FD-83) : Repairs to Almirah large steel with shelves and 1/2 H, 1/2 S and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement shelves made out of PBI sheet 20 gauge and fixing complete all as specified & as directed.

Fixing only existing Shelves including provision of necessary fixing arrangements complete all as specified & as directed.

S&F in replacement chromium plated MS handle complete with washer etc as approved complete all as specified and as directed.

S&F in replacement brass body, 6 lever lock for Almirah large steel with duplicate keys (Sample shall be approved by GE before incorporation of the work) complete all as specified and as directed.

S&F in replacement legs made out of 1mm thick PBI sheet channel base ends covered complete all as specified and as directed.

S&F in replacement base made out of PBI sheet 20 gauge complete all as specified and as directed.

S&F in replacement MS hinges fitting, 75mm long including necessary smoothing the welded surface complete all as specified and as directed.

S&F in replacement locking device MS round bar 10mm dia with brass bush fitting (Locking system) complete all as specified & as directed.

Almirah medium steel with Shelves and 1/2 H, 1/2 Shelves (FD-1032):- Repairs to Almirah medium steel with shelves and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement shelves made out of PBI sheet 20 gauge and fixing complete all as specified & as directed.

Fixing only existing Shelves including provision of necessary fixing arrangements complete all as specified & as directed.

S&F in replacement chromium plated MS handle complete with washer etc as approved complete all as specified and as directed.

S&F in replacement brass body, 6 lever lock for Almirah large steel with duplicate keys (Sample shall be approved by GE before incorporation of the work) complete all as specified and as directed.

S&F in replacement legs made out of 1mm thick PBI sheet channel base ends covered complete all as specified and as directed.

S&F in replacement base made out of PBI sheet 20 gauge complete all as specified and as directed.

S&F in replacement MS hinges fitting, 75mm long including necessary smoothing the welded surface complete all as specified and as directed.

S&F in replacement locking device MS round bar 10mm dia with brass bush fitting (Locking system) complete all as specified & as directed.

Table office Clerk Steel (FD-84(m): Repairs to table office clerk steel and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement table top made out of 18mm/ 19mm thick prelaminated particle board, exterior Grade, of approved quality, including 4mm thick teak wood beading all around the top, duly french polished. The top shall be fixed making appropriate fixing arrangements i.e. drilling of holes, tightening of top, with appropriate size of screws wood steel complete all as specified and as directed.

S&F in replacement drawer made to shape and size made out of 1mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion, denting and welding or any other means to enable all the three drawers in smooth working condition complete all as specified and as directed.

S&F in replacement brass body lock with duplicate keys complete all as specified and as directed.

S&F in replacement PVC shoes complete all as specified and as directed.

Table office Officer Steel (FD-85(m): Repairs to table office officer steel and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement table top, made out of 18mm/ 19mm thick prelaminated particle board, exterior Grade, of approved quality, including 4mm thick teak wood beading all around the top, duly french polished. The top shall be fixed making appropriate fixing arrangements i.e. drilling of holes, tightening of top, with appropriate size of screws wood steel complete all as specified and as directed.

S&F in replacement drawer made to shape and size made out of 1mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion, denting and welding or any other means to enable all the three drawers in smooth working condition complete all as specified and as directed.

S&F in replacement brass body lock with duplicate keys complete all as specified and as directed.

S&F in replacement PVC shoes complete all as specified and as directed.

Table Dining ORs with Aluminium Top (FD-185): Repairs to table dining ORs with aluminium top and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement table top, made out of 18mm/ 19mm thick commercial particle board covered with 22 gauge aluminium sheet with over lapping with steel screws complete all as specified and as directed.

S&F in replacement frame made out of MS Square pipe, 25mm x 25mm, 16 gauge, including stiffner, where ever required complete all as specified and as directed.

M&L for welding upto 2.5 mm long welding to steel frame with electric welding and smoothening of the welding portion complete all as specified and as directed.

Table Bed side, Steel (FD-157): Repairs to table bed side steel and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement table top, made out of 18mm/19mm thick prelaminated particle board, exterior Grade, of approved quality, including 4mm thick teak wood beading all around the top, duly french polished. The top shall be fixed making appropriate fixing arrangements i.e. drilling of holes, tightening of top, with appropriate size of screws wood steel complete all as specified and as directed.

S&F in replacement knob with flat iron strip and locking strip made out of Flat iron 15x3 mm complete all as specified and as directed.

S&F in replacement legs, made out of MS square pipe, 25mm x 25mm x 18 gauge, as per shape/ size shown in drg. Fixing of legs shall be done by gas welding continuously and smoothened with File steel as approved by GE/ Engr-in-Charge complete all as specified and as directed.

S&F in replacement PVC shoes complete all as specified and as directed.

Chair visitor cushined (TP): Repairs to Chair Visitor Cushioned and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement hand rest with screw steel complete all as specified and as directed.

Removing unserviceable upholstory and S&F in replacement foam 32 density with lining cloth, Hessian cloth on seat & back both complete all as specified and as directed.

Rack Side Steel with Tray (FD-97): Repairs to rack Side Steel with Tray and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement shelf rack side steel 1 mm thick PBI sheet channel base and welding complete as required and shown on drg complete all as specified and as directed.

Screen moveable 3 fold steel with curtains (FD-83)

Removing the repairable parts and repair duly dents & bents with sliding arrangement and fixed with the proper duly welding and smooth edges as per drg( welding point) complete all as specified and as directed.

Removing the old curtain of screen moveable and S&F new curtain of green coloured cloth complete all as specified and as directed.

Removing the old wheels of screen moveable and S&F new wheels of good quality complete all as specified and as directed.

Locker bed side Steel/ Steel Locker 4/6 Unit (FD-257, FD-243) : Repairs to Lockers Steel and S&F in replacement following components complete as shown on drgs all as specified and as directed:-

S&F in replacement shelves, made out of PBI sheets, 1 mm thick and S&F 4 Nos cleats as per drg, made to shape all 4 sides, including two coat of olive green synethic enamelled paint over and including a coat of red oxide primer complete all as specified and as directed.

All as per Srl item No 9.01 here in before but fixing only complete all as specified and as directed.

S&F in replacement 100 mm Aluminium anodised handles to lockers steel complete all as spaecified and as directed.

S&F in replacement 100 mm long aluminium hasp & staples to lockers steel complete all as spaecified and as directed.

S&F in replacement MS hinges 75 mm long by welding, including removing old hinges and smoothening the welded surface complete all as specified and as directed.

S&F in replacement legs made out of 1 mm thick PBI sheet channel base ends covered as shown on drg complete all as specified and as directed.

S&F in replacement base made out of PBI sheet 20 gauge complete all as specified and as directed.

Step stand two tier steel (FD-131)

Removing the repairable parts and repair duly dents and bents and fixed with the proper welding and smooth edges as per drg (welding point) complete all as specified and as directed.

Chair Visitor Cushioned set of 3 chair welded together

Removing unsv upholstory and S&F of foam 50 MM thick 32 density (Make- Feather foam/ Sleepwell and change of tapestry cloth not less than of Rs 150/RM as directed by Engr-in-Charge on both seat & back complete all as specified and as directed.

S&F new plywood 12 mm thick (Seat) complete all as specified and as directed.

S&F new plywood 12 mm thick (back) complete all as specified and as directed.

S&F adjustable bolt complete all as specified and as directed.

Charpoy GI pipe (FD-220): Repairs to Charpoy GI pipe and S&F in replacement following components complete as shown in drgs and all as specified and as directed:-

S&F in replacement long rail made out of 32mm bore GI pipe, medium grade, 1900 mm length, duly threaded both ends as shown on drg complete all as specified and as directed.

Cutting and threading old broken long rail and making short rails of length 810 mm and threaded both ends as shown on drg complete all as specified and as directed. Note for Srl item No 13.01 & 13.02: Balance piece of long/ short rail of the reissuing shall be considered in Sch of Credit.

Cutting and threading old broken Short rail and making legs of length 400 mm as shown on drg complete all as specified and as directed.

S & F check nut of size 32mm dia 6mm thick conforming to IS complete all as specified and as directed.

S&F in replacement 3 way GI elbow 32mm dia ISI marked complete all as specified and as directed.

S&F in repair Pre-laminated exterior grade-I MDF of 6 feet to 6 1/2 feet x 3feet x 12mm thick as in top of GI charpoy suitable size mild steel Nuts & bolts Qty 08 Nos with hexagonal or square heads at one end and screwed the other with washer and hexagonal or square nut of suitable size, length of bolt exc 5cm but n.exc 10cm long with dia of neck 5 to 10mm including making holes by drilling in GI pipe (2 hole each in long rail, 2 each in short rail ) including removal of old existing Ply wood all as specified and shown on drawing and directed by GE/Engr-in-charge. Make: Green Panel Max, Duro, Marino.

Repairs to chair CBA/ CBB Tubular Steel with arm/without arm (FD-75 (M):- Removing the existing unserviceable broken seat and back frame of tubular steel chairs, S&F new seat and back frame out of 1st class hard wood Teak duly french polished and cane for weaving as drawing with not less than 1.8mm width plastic cane for weaving and 3mm width for bordering. Canning holes shall be 12.5 mm centre to centre. Seat and back shall be fixed to frame with bolts and nuts (5mm dia and 100mm long) 04 Nos each for seat and back. Handles are to be shaped as per drawing and duly polished and fixed with suitable steel screws complete all as specified and as directed.

Seat of chair CBA tubular steel with arms seat complete all as specified and as directed.

Back of chair CBA tubular steel with arms complete all as specified and as directed.

Seat of Chair CBB tubular steel without arms seat as per drg complete all as specified and as directed.

Back of chair CBB tubular steel w/o arms complete all as specified and as directed.

Arm rest for chair CBA tubular with arms complete all as specified and as directed.

Painting to the following Steel Furniture: Preparing the old painted surfaces of steel furniture by sand papering, deserting removing dents and bents and filling with putty (metal paste) and applying two coats of synthetic enamel paint to give glossy finish complete all as specified and as directed.

Almirah large steel with shelves and 1/2 H, 1/2 S (Inside & Outside complete) FD-83/114/1031/351

Almirah medium steel of size 1/2 hanging x 1/2 shelves. (Inside & Outside complete) FD-1032.243

Locker bed side steel/ store locker 4/6 unit. (Inside & Outside complete) FD-257

Table office Clark steel (FD-84)

Table office officer steel. (FD-85)

Table dining OR's Alluminium (FD-185)

Table bed side steel (FD-157)

Chair tubular steel with arms. FD-75(M)

Chair tubular steel without arms. FD-75(M)

Table 3' x 2' with Drawer/ without drawer steel/ 3'x3'x760 mm (FD-283/284)

Chair easy steel. (FD-121)

Couch Examination (FD-122)

Rack adjustable/ assorted size/ 6 tier. (FD-408/11/158)

Step stand two tier steel FD HFD-2009

Stool steel 305x305x510mm (FD-409)

Chair Visitor Cushioned set of 2/3 chair welded together. FD-TP

Chair visitor steel multiseater set of 2/3 FD-TP

Book Shelf large steel (FD-69)

Book shelf open small steel (FD-355)

Trustle store room iron (FD-1043)

Description of Work / Item(s)

Amount

Table Writing/ Table office clerk (FD-33 (M):- Repair to table writing/Table office clark and S & F in replacement following components with seasoned teak wood duly polished complete as shown on drgs and all as specified and as directed:-

S&F in replacement new leg of table writing size 740mm x 45mm x 45mm complete all as specified and as directed.

S&F in replacement new top long rail of size 620mm x 50mm x 25mm complete all as specified and as directed.

S&F in replacement new top short rail of size 375mm x 50mm x 25mm complete all as specified and as directed.

S&F in replacement new stiffener of size 975mm x 50mm x 25mm complete all as specified and as directed.

S&F in replacement new top of Table writing with 18mm/ 19mm thick pre laminate particle board. Edge shall be covered with 6mm thick teak wood beading duly polished complete all as specified and as directed.

S&F in replacement new drawer of table writing made to shape and size, front of the drawer shall be 18mm/ 19mm thick pre laminated particle board both side and back made of season teak wood with 02 Nos knobs complete all as shown in Drgs as specified and as directed.

S&F in replacement ply wood 3mm thick one side teak faced in front, rear and both side of table writing duly polished complete all as speicified and as directed.

S&F in replacement new shutter for table writing with new 18" long piano type hinge, one knob and shutter made from 18mm/19mm thick pre laminated particle board, edges shall be covered with 6 mm thick teak wood beading complete all as specified and as directed.

Repairs of side board (FD-241)

Removing the existing unserviceable Top and S&F new top made out of 18/19mm thick pre-laminated exterior grade MDF board OSL (Grade I / Grade I Tye I) particle board (Kitply/ Greenply/ Green Panelmax) complete all as shown in Drgs as specified and as directed.

Removing the existing unserviceable side and S&F new side made out of 18mm/19mm thick pre laminated particle board (Kitply/ Greenply) complete all as shown in Drgs as specified and as directed. (Each side will be measured as a single unit).

Removing the existing unserviceable back of side board and S&F new back with 6mm thick plywood commercial and duly polished complete all as shown in Drgs as specified and as directed.

Removing the existing unserviceable Top drawer and S&F new pre laminate particle board 18mm thick (Kitply/Greenply) for front of drawer and teak wood for both side and rear side of drawer and 6mm commercial plywood used for bottom of the drawer and French polished to be done only front side of the drawer complete all as shown in Drgs as specified and as directed.

Removing the existing unserviceable shutter and S&F new shutter made out of 18/19mm thick pre-laminated exterior grade MDF board OSL (Grade I / Grade I Tye I) particle board (Kitply/greenply/ Green Panelmax) including hinges and locks complete all as shown in Drgs as specified and as directed. (Each shutter will be measured as single unit)

Removing the existing unserviceable bottom of side board and S&F new bottom made out of 18mm/19mm thick plywood commercial type and painted with two coats or synthetic enamel paint over a coat of primer complete all as shown in Drgs as specified and as directed.

Removing the existing unserviceable leg frame and S&F new teak wood leg frame with legs duly polished complete all as shown in Drgs as specified and as directed.

Table dining 6 persons/ 8 persons (FD-30/239/ 273)

S&F in replacement new top with new pre laminated particle board 18mm/19mm thick (Kiyply/ Greenply) exterior grade with 4mm thick teak wood edgings duly polished all around complete all as specified, as shown on drgs and as directed.

Table 900mm x 600mm x 760mm with drawer/ without drawer (FD-41/224/283)

S&F in replacement new top with new pre laminated particle board 18mm/19mm thick (Kiyply/ Greenply) exterior grade with 4mm thick teak wood edgings duly polished all around complete all as specified, as shown on drgs and as directed.

Sofa set 5 Seater with FRC (FD/MAP-II/02)

S&F in replacement of foam cushion (ISI marked IS: 1741) 10 Nos in each set of sofa 3 pices, 5 seater size of cushion 22" x 20" x 4" thick 32 density and tapestry cloth of best quality as approved complete all as per drg and as specified and directed (10 Nos cushions to be replace) in each sofa set Make-Sleep Well/ Coir foam/ Feather foam/ JJ foam)

Repair & S&F Teak Wood for following Component of Chair Easy after removal of Old unserviceable Component duly polished and as directed by Engineer-in-Charge (FD-280, FD-229, FD-282, FD-279 & FD-75)

Removing of Teak Wood the unserviceable front leg and S&F new legs of teak wood duly polished complete all as shown in Drgs as specified and as directed.

All as per Srl item No 6.01 above but back leg only complete all as shown in Drgs as specified and as directed.

Removing the unserviceable side rails of seat frame and S&F new side rails duly polished all as per drg. The caning holes 12.5 mm centre to centre all as per drg complete all as specified and as directed.

All as per Srl item No 6.03 above but front rails of seat frame complete all as specified and as directed.

All as per Srl item No. 6.03 above but back rail of seat frame complete all as specified and as directed.

Removing the unserviceable back rest stiffener and S&F new stiffener duly polished complete all as shown in Drgs as specified and as directed.

Removing the unserviceable arm rest complete all as shown in Drgs as specified and as directed.

Chair Dining (FD-279): Repair to Chair Dining and S&F in replacement following components of seasoned teak wood duly polished complete as shown on drgs and all as specified and as directed:-

S&F in replacement new front leg duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement new back leg duly polished complete all as shown in Drgs as specified and as directed.

Removing the unserviceable side rails of seat frame and S&F new frame duly polished complete all as shown in Drgs as specified and as directed.

Removing the unserviceable front rail and S&F new front rail of seat frame duly polished complete all as shown in Drgs as specified and as directed.

Removing the unserviceable back rail and S&F new back rail of seat frame duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement new back rest stiffener duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement new bottom stiffener duly polished complete all as shown in Drgs as specified and as directed.

Repairs to chair CBA Spl W/hand rest (FD-120)

Removing the existing unserviceable seat frame S&F new seat frame made out of Ist class hard wood Teak duly caned 12.5 mm centre to centre, cane shall be 1.8 mm wide for weaving and 3mm for bordering as per drg. Seat shall be applied with french polish as specified to the exposed surfaces to achieve glossy finish. The seat shall be fixed to the frame with appropriate steel bolts and nuts (5mm dia 100mm long) 04 Nos complete all as shown in Drgs as specified and as directed.

All as per Srl item No 8.01above but back frame complete all as shown in Drgs as specified and as directed.

Removing the unserviceable hand rest and S&F new hand rest made out of 19mm thick pre-laminated particle board (Teak face) made to shape as per drg. Fevicol with yellow Amba powder mixture shall be applied to frame with proper steel screws complete all as shown in Drgs as specified and as directed.

Table 3' x 3' x 2'6" (900 x 900 x 760mm) (FD-291): Repair to Table 3'X3'X2'6" and S&F in replacement following components of seasoned teak wood duly polished as shown on drags complete all as specified and as directed:-

S&F in replacement new Table top, made of 18mm/ 19mm thick pre-laminate partical board, exterior quality, type-I, grade-II duly fixed PVC beading complete as per FD complete all as specified and as directed.

S&F in replacement new long rail, duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement new leg, duly polished complete all as shown in Drgs as specified and as directed.

Almirah large with Shelf (DB-4166, WDF-03)

Removing of old unserviceable existing shutters and S&F of new shutter made out of pre-laminated particle board 18mm thick and shall be fixed with hinges steel of required size including hasp & staple safety type of including steel handle duly approved by GE/ Engr-in-Charge complete all as shown in Drgs as specified and as directed.

Removing of old unserviceable shelf, S&F of new shelf of required size made out of ply wood commercial 12mm thick duly approved by Engr-in-Charge complete all as shown in Drgs as specified and as directed.

Removing of old unserviceable existing side and S&F of new sides made out of ply wood commercial one side teak face 6mm thick as per size/ design shown in drg duly approved complete all as shown in Drgs as specified and as directed.

Removing of old unserviceable existing back ply and S&F of new plywood commercial 6mm thick Make- Kit Ply/greenply rest duly approved by GE/ Engr-in-Charge complete all as shown in Drgs as specified and as directed.

Almirah Med with shelf

All as per item No 11 above but for shutter almirah medium with shelves complete all as shown in Drgs as specified and as directed.

All as per item No 11.01 above but shelves almirah medium with shelves complete all as shown in Drgs as specified and as directed.

All as per item No 11.01 above but side of almirah medium with shelves complete all as shown in Drgs as specified and as directed.

All as per item No 11.01 above but back ply of almirah medium with shelves complete all as shown in Drgs as specified and as directed.

Table Dressing W/M Ladies (FD-32 (M) & FD-251): Repair to Table dressing W/M Ladies and S&F in replacement following components of seasoned teak wood duly polished complete as shown on drgs and all as specified and as directed:-

S&F in replacement new mirror, 5 mm thick of size as per drg. Mirror shall be fixed in frame after providing rubber packing of required size before fixing of back ply complete all as shown in Drgs as specified and as directed.

S&F in replacement new back ply of Mirror made out of teak wood ply, 6mm thick complete all as shown in Drgs as specified and as directed.

S&F in replacement new glass shutter including aluminium channel complete all as shown in Drgs as specified and as directed.

Removing/ dismantling of old unserviceable shutters and S&F of new shutter/ drawer made out of teak wood ply12mm thick one side teak face complete all as shown in Drgs as specified and as directed.

Table Dressing Gents(FD-32, FD-251): Repair to Table dressing Gents and S&F in replacement following components of seasoned teak wood duly polished complete as shown on drgs and all as specified and as directed:-

S&F in replacement new top, made out of 12 mm thick pre laminated particle board complete all as shown in Drgs as specified and as directed.

S&F in replacement new mirror of 5mm thick with back ply 6mm alongwith 4mm bedding complete all as shown in Drgs as specified and as directed.

S&F in replacement new knob CP brass 25mm size complete all as shown in Drgs as specified and as directed.

Peg Table (FD-25 (m), 270)

Dismentling of old existing unserviceable top of Peg Table and S&F of new top of 18/19mm thick pre-laminated exterior grade MDF board OSL (Grade I / Grade I Tye I) particle board complete all as shown in Drgs as specified and as directed.

All as per Ser item No 14.01 above but front top rail/ side top rail/ stiffener & leg of 1st grade teak wood complete all as shown in Drgs as specified and as directed.

Bed plywood Top(FD-246/247): Repair to Bed plywood top and S&F in replacement following components complete as shown on drgs and all as specified and as directed:-

S&F in replacement new 12mm thick plywood (commercial) of size 1980mmx900mm, duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement long rails of size 1980mmx90mmx35mm, made out of 1st Class hard teakwood, made to shape duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement 4mm thick OST plywood of head board of size 450mmx900mm and 15mm teak wood beading made to shape duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement 4mm thick OST plywood of foot board of size 250mmx900mm and 15mm teak wood beading made to shape duly polished complete all as shown in Drgs as specified and as directed.

S&F in replacement new foot board of teak wood including polishing complete all as shown in Drgs as specified and as directed.

S&F in replacement new head board of teak wood including polishing complete all as shown in Drgs as specified and as directed.

Recanning of all types of chair, stool drassing bin soiled linen etc

Recanning of steel and (excluding chair Verendah) wooden chairs, stool dressing, bin soiled linen etc, of different types after removing of old canes in weaving with new white plastic cane with 1.8mm wide are type and 3mm wide area for border as of approved quality complete all as per pattern shown complete all as shown in Drgs as specified and as directed.

Polishing of the following wooden furniture:- Preparing the old painted surfaces of following wooden furniture items of any description by sand papering, removing the stains and filling the holes, cracks with putty (bees wax & Chalk powder etc) and applying two or more coats of french polish to give glossy finish complete all as specified and as directed:-

Bed plytop (FD-246/ 247)

Table writing/ Table office clerk (FD-268/88 / 33(M)

Side board (FD-241)

Table dining 6 persons/ 8 persons (FD-239/ 273)

Sofa set five seater with cushioned (FD-281)

Chair easy/ dining/ writing (FD-229/ 279/ 282/ 75)

Table dressing ladies/ gents with mirror (FD-32(M)/ 25)

Table bed side wooden (FD-265/ 276)

Table 3' x 2' with drawer/ without drawer (FD-41/ 224/ 283)

Table peg (FD-25(M)/ 270)

Teapoy (W) (FD-232/ 382/ 278)

Table centre (FD-174)

M/S CHANDER SHEKHAR

M/s Suraj Furnitures

SMS Enterprises

Techno India Enterprises

M/S CHANDER SHEKHAR

Techno India Enterprises

SMS Enterprises

M/s Suraj Furnitures