Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.5 L
EMD Value
₹29,000
Closing Date
8 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE PATHANKOT
HQ CWE PATHANKOT
PROVN OF 160 KVA TRANSFORMER ALONGWITH ALLIED ACCESSORIES FOR ECHS POLYCLINIC AT MIL STN UNCHIBASSI UNDER GE SOUTH PATHANKOT
2026_MES_798998_1
CWE/P-58/2026-27
Open Tender
Electrical and Maintenance Works
Item Wise
150 days
GE SOUTH PATHANKOT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SOUTH PATHANKOT
₹29,000
16 Nov 2026
16 Nov 2026
10 Dec 2026
16 Nov 2026
8 Dec 2026
1 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply , installation, commissioning and testing of AC 3 phase 50 HZ 160 KVA capacity, step down transformer, Outdoor type 11000/433 volts (at no load) as per IS-1180, Not less than LEVEL - 2 copper wound, ONAN, oil cooled, oil immersed with oil tank and filled with ISI marked insulating oil (IS-335) up to the top level in oil tank with oil level indicator, Breather assembly with silica gel, lifting hook, drain valve, air vent valve , wheel with channel and locking arrangement to put on the plinth with external cooling tubes, core type, delta star connected in accordance with vector symbol DYN-11(vector group-4) with neutral brought on (LV) side & having tapppings in 7 steps in equal steps of 2.5%, (Plus/Minus 7.5 % on plus and minus side to vary the secondary voltage primary side by means of hand operated off load tap changing gear, so as to change/correct HV voltage on secondary side including provision of all necessary /standard fittings including all jointing materials, connecting with electrical system, earthing, testing and commissioning all as conforming to, IS-2026 and mainly comprising of the following.
(a) One cable end box on HV side having cable glands suitable for 95 sqmm 3 core XLPE 11 KV HT cable (consisting of 3 Nos porcelain H.T bushings with brass/gun metal bushing rods complete with nuts and washers). | 1 | Each | 2.25 | ₹2.25 |
| 1.01 | (b) One cable box on secondary (LV) side consisting of 4 Nos porclain bushings with GM bushing rods complete with GM nuts, and washers and suitable size extended copper bus bar strip for connecting of 240 sqmm 3.5 core cable with two No cable gland suitable for reception of 1 run of INCOMING LT PVC sheathed armoured cables of size 240 sqmm 3.5 core (c) Oil conservator with filter type, drain valve and oil level gauge.
(d) Dehydrating breather assembly with first fill of denydrating agent.
(e) Explosive vents.
(f) Thermometer pocket on tank cover.
(g) One temperatoure indicator 150mm dia with alarm and trip contact, and one winding temperature indicator with alarm and trip contact with marshalling box and connector in and including providing of suitable core control cable, armoured to connect Marshalling box to RMU/VCB complete and testing on completion
(h) Rating plate owith terminal markings.
(j) Two earthing terminals on tank /tank cover to facilitate fixing of 32x 6m GI earth strip.
(k) Oil level guage.
(l) Oil drain and filter valves.
(m) Oil filter hole with cap /plug wityh connections complete.
(n) Lifting lugs.
(o) Air relief valve plug.
(p) Four plan solid cast steel detachable rollers. | - | - | - | - |
| 1.02 | (q) First fill of fresh oil conforming to relvant IS and testing upto 40 KV dielectric strength.
(r) Extra bushing for neutral outside the LT cable box for providing independent earthing for neutral (s) Buchholz relay with alarm and trip contact and shut off valves and connecting to marshalling box or RMU/VCB for making Buchholz functional complete.
(t) Provision of 2 Nos of danger boards 250x200 mm size made out of 1.6 mm thick MS plate , vitreous enameled white, with letters, figures of voltage and conventional skull and bones in signal red colour, one at HT side and other on LT side.
(u) Any other fittings/accessories so as to conforming to not less than Level -2, IS 1180 (Pt-I)/2014. (v) PCC plateform as directed by Engr-in-charge for mounting of transformer | - | - | - | - |
| 2 | Supply, installation, commissioning and testing of indoor type, 440volts, AC, LT, APFC panel of 80 KVA capacity Mixed dielectric (MD) capacitor factory fabricated, made out of 3.15mm CRCA sheet, CPRI approved, duly wiring with copper flexible wire of suitable rating for power control , Panel shall be dully powder coated with 8 tanks sheet treatment ( De-greasing, water rinsing, de-rusting, water rinsing, Activation- phosphating, water rinsing, (Passivationthickness of powder coating shall no be less than 80 microns) in and including the following :-
(A) Incoming
(i) MCCB, 415 volts, 4 pole, 125 Amps, 25 kA, Adjustable 70 to 100% with rotary Handle Mechanism - 01 Nos
(ii) Digital Ammeter with built - in - selector switch Aux Supply 230 Volts, AC - 01 Nos
(iii) Digital Voltmeter with built in selector switch Aux Supply 230 Volts, AC-01 Nos
(iv) LED indication lamp 230 Volts, AC 22.5mm dia RYB-03 Nos
(v) MCB 2 Amp, Single Pole-03 Nos
(vi) Microprocessor APFC relay with single CT sensing 16 stages auxilary supply 230volts, AC - 01 Nos
(vii) Aluminium busbar 25x10mm, TPN - 01 Set
(viii) Auto/Manual Switch - 01 Nos | 1 | Each | 4.25 | ₹4.25 |
| 2.01 | (B) Outgoing
(i) Capacitor 10 KVAr ultra heavy duty 440V cylindrical - 05 Nos
(ii) Capacitor 05 KVAr ultra heavy duty 440V cylindrical - 04 Nos
(iii) Capacitor 02 KVAr ultra heavy duty 440V cylindrical - 05 Nos
(iv) MCB Triple pole 25 Amps, 10 kA, 'C' sries - 05 Nos
(v) MCB Triple pole 16 Amps, 10 kA, 'C' sries - 04 Nos
(vi) MCB Triple pole 10 Amps, 10 kA, 'C' sries - 05 Nos
(vii) Capacitor duty contactor 3 pole 10 KVAr - 05 Nos
(viii) Capacitor duty contactor 3 pole 05 KVAr - 04 Nos
(ix) Capacitor duty contactor 3 pole 02 KVAr - 05 Nos
(x) 22.5mm dia Push Button ON/OFF- 14 set
(xi) 22.5 mm dia LED Red - 14 Nos
(xii) 22.5mm dia LED Green- 14 Nos
(xiii) Armoured 2 core copper cable 1.5sqmm shall be provided for sensing CT
(xiv) Sensing CT as per site load condition shall be provided alongwith APFC Panel
(xv) All power connection shall be done with 1100 volts FRLS copper flexible wire with copper termination of proper size and proper type
Note (i) GA drawing for APFC panel shall be got approved from the Accepting Officer/Engineer-in-charge before manufacturing of APFC panels (ii) PCC plateform of suitable size shall be provided as per site requirement, The cost of all above shall be demmed to be included in unit quoted rates. | - | - | - | - |
| 3 | Material and labour for earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing) and dismantling old defective earthpit, complete all as specified and directed.
Note :- Returning and filling of earthing would be with vegetable soil free from gravels and boulder. | 12 | Each | 4.25 | ₹51 |
| 4 | M&L for construction of platform of size 3000 x 2500 x 1200 mm for installation of transformer with brick steps on one side, chain link fencing around transformer, fencing should have hinged door and locking arrangement , transformercomplete all as per Drg No. CEPZ/C-TD/002/13 complete all as specified and directed. | 1 | Each Job | 6.25 | ₹6.25 |
| 5 | Supply and laying synthetic Insulating Mat of size 2m X 1m and 2.5 mm thick for up to 11 KV for electrical purpose as per is 15652-2006 ,(Superseding IS 5424) suitable for electrical shock safety made from synthetic insulating material, free from any insertions leading to detoriation of insulating properties. Note : The upper surface should have small aberration (Rough Surface) with out edges to avoid slippery effects.The mat should be fire retardant & self extiguishing complete all as specified and directed. | 1 | Each | 7.25 | ₹7.25 |
| 6 | Excavation in trenches n.exc 1.5mtr wide and not exc 1.5mtr depth and getting out in any type of soil, complete all as specified and directed. | 9 | Cum | 12.25 | ₹110.25 |
| 7 | Returning and filling in of excavated soil including spreading,levelling,watering and well ramming in layers not exceeding 25 cm each, complete all as specified and directed. | 7 | Cum | 13.25 | ₹92.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.13 MB
tender58.pdf
Tender Documents • 12.15 MB
BOQ_896379.xls
BOQ • 1.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .