SITC of Switchgears and allied work service block

Amount

33 kV SUBSTATION & HT WORK HT CABLE & END TERMINATIONS

Supplying , erecting & terminating 3 x 300 sq. mm. aluminium 33 kV(UE), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CBHT

Providing and erecting Heat shrinkable indoor termination kit for 33 kV (E) /33 kV (UE) XLPE HT cable 3x300 sqmm to 400 sq. mm. with necessary material as per specification no. B-JT/HT

Providing and erecting Heat shrinkable outdoor termination kit for 33 kV (E) /33 kV (UE) XLPE HT cable 3x300 sq. mm. to 400 sq. mm. with necessary material as per specification no. CBJT/ HT

HT BREAKER PANEL

Supply ,Installation,Testing & Commisioning of 33 KV, 800 A, Indoor board VCB Outgoing feeder as an extension to existing board (complete with adapter panel if required), bottom/top cable entry & exit, 33kV/70kV/170 kVP BIL, 25kA/3 Sec comprising. a) 1no.-Front operated, Drawout, 230V AC MWSC, 33kV VCB, with C/T/N switch, 30V DC, L/R switch, P127 relay for OC/EF/REF/OV/UV element numerical relay, Master Trip relay, 3x 2Core resin cast 100A-75A /5A CTs-C1/CL5P10/15VA & C2/CL 0.5/10VA, Digital MFM (EM 6459) etc. having approx. dimensions of 1100 mm (L)x3020mm (D)x2400mm(H) complete with On/OFF/AT & R/Y/B/Blue/White indicators & mechanical flags etc. & bottom cable entry - (Existing HT Breaker Panel at HWCC Utility Block is of Siemens Make - AIS, NXAIR H panel with 3AH0 VCB)

Supply ,Installation,Testing & Commisioning of 33 KV, 800 A, Indoor board VCB, bottom cable entry & exit, Extensible,33kV/70kV/170 kVP BIL, 25kA/3 Sec comprising ( 1-IN-5 OUT). a) 1 no-Front operated, Drawout, 230V AC MWSC, 33kV VCB, with C/T/N switch, 30V DC, L/R switch, P127 relay for OC/EF/OV/UV element numerical relay, Master Trip relay, 3x 2Core resin cast 100A-75A /5A CTs-C1/CL5P10/15VA & C2/CL 0.5/10VA, 33kV/√3/110V/√3 resin cast PT-W1/CL3P/50VA & W2/CL 0.5/50VA, TOD solid state Trivector Meter, Digital MFM (EM6436) with RS 485 connctivity,6 W solid state annunciator having approx. dimensions of 1100 mm (L)x3020mm (D)x2400mm(H) complete with On/OFF/AT & R/Y/B/Blue/White indicators & mechanical flags etc. & bottom cable entry. b) 2no.-Front operated, Drawout, 230V AC MWSC, 33kV VCB, with C/T/N switch, 30V DC, L/R switch, P127 relay for OC/EF/REF/OV/UV element numerical relay, Master Trip relay, 3x 2Core resin cast 50A-25A /5A CTs-C1/CL5P10/15VA & C2/CL 0.5/10VA, Digital MFM (EM6436) with RS 485 connctivity,12 W solid state annunciator for transformer parameters ect. having approx. dimensions of 1100 mm (L)x3020mm (D)x2400mm(H) complete with On/OFF/AT & R/Y/B/Blue/White indicators & mechanical flags etc. & bottom cable entry.

TRANSFORMERs

Supply ,Installation,Testing & Commisioning of Outdoor transformer, ONAN type 33 KV ,1000 kVA, 33000/433 V, Delta/Star 11 (Dyn11), neutral solidly grounded, mineral oil cooled transformer, Double copper wound, OLTC with Taping on Primary (HV Side) +5 % to -15% in 16 steps of 1.25% with RTCC, Class A, Temperature rise - (Ambient -50 Deg C, Temp. rise of oil - 40 Deg C over ambient, Temp. rise of Winding - 45 Deg C over ambient) Losses to comply with IS 1180 (Level-II) at 50% & 100 % loading, HV cable box to suit 1 run x 3 core x 300Sq.mm. Aluminium Armoured HT 33 kV Cable & LV cable box to suit busduct termination, extra neutral, on readymade foundation, including all precommissioning & commissioing tests & oil filtration etc. Transformer internal paint hot oil resistant & external paint heat resistant marine PU paint with 100 DFT microns, mounted on plinth & all standard accessories as mentioned in technical specifications, First fill of oil, with RTCC PANEL . Refer Technical Specifications for additional details

DG SETs

Supplying, erecting and commissioning of diesel generating set with alternator of 625 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GENDG Vendor's scope shall also include - a. Obtaining necessary approval from electrical inspector & other agencies as per statutory requirements. b. Provision of 1000 A FP ACB inside canopy for generator protection. c. Exhaust piping with thermal insulation raised at least 5 meter above substation building with all necessary support system required to complete the work. d. Providing DG set trickle & boost type battery charger suitable to charge required number of batteries.

EARTHING, SAFETY & LIGHTNING PROTECTION SYSTEM Supply, E/T/C of GI Pipe in Pipe earthing system, 3 meter long - Outer electrode dia. 80mm, Inner electrode dia. 40mm HDG up to 80- 100microns, filled with conductive material, along with 2 bags of Soiltreat compound having enhance ionic properties of the soil, reduce soil resistivity, ionically conductive, increase life span of earthing system. The compound shall be chemically and physically stable (Bag of 25Kgs each). The electrode shall be tested by CPRI & Soiltreat Compound shall be tested as per RoHS standard. Work includes chamber masonary, door frame & concrete cover, clamp for connecting 50mm x 6mm GI strip as per ammendment 2 of IS 3043:2010 with all materials, testing & recording the results complete as required.

HT Breaker Panel Body Earthing - 2 Nos

1000 kVA Transformer-01 Earthing - 4 Nos (Body - 2 & Neutral - 2 Nos)

1000 kVA Transformer-02 Earthing - 4 Nos (Body - 2 & Neutral - 2 Nos)

625 kVA DG Set-01 Earthing - 4 Nos (Body - 2 & Neutral - 2 Nos)

625 kVA DG Set-02 Earthing - 4 Nos (Body - 2 & Neutral - 2 Nos)

LT Panel Body Earthing - 2 Nos

Lightning Arrester Earthing - 2 Nos

LV Equipments (if Any) - 2 Nos

1600A LT Bus-duct - 4 Nos (2 For each Bus-duct)

Fencing/ Metal Structure Body Earthing - 2 Nos

Supply, Installation, Testing and commissioning of 50 mm x 6 mm COPPER strip on surface or in recess for connections etc as required

Supply, Installation, Testing and commissioning of 60 mm x 10 mm GI strip on surface or in recess for connections etc as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 25mm x 3 mm GI Strip as down conductor mounted on SMC insulator for Lightning Arrestor.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

SAFETY SYSTEM

Provided pair of duly tested rubber hand gloves as per IS:340715 suitable for working on 33kV supply.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class C insulation conforming to IS: 15652 – 2006 & CPRI tested having 3 mm thickness upto 33 kV

Supplying and fixing 33 kV Dangerboard of appropriate size & marking (in English & Local language).

Supplying and fixing 0.433 kV Dangerboard of appropriate size & marking (in English & Local language).

Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.

Supply, installation, testing & commissioning of Fire sealent material to seal the hume pipes, cable entry cut outs, shaft etc. ( Min 2 Hr Fire Rating)

HT air discharge rod

LT Panel and Distribution boadr LT Panel

Supply Installation, testing and commissioning of Following all Indoor Panels comprising below points. 1)-Panels shall be fabricated out of 16/14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted, IP-52 degree protection, Top bus duct or cable entry as per the case & top/ Bottom cable exit steel, 2mm frame, 1.6 mm compartments & tank process treated & 2- times Epoxy painted. 3)-The panel shall be compartmental, Form 3B type, with suitable size of bus bar and separate cable and busbar chambers. 4)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel. 5)-The cable chambers shall be free from any live open connections and minimum cleareance to be provided for termination. 6)-Current Density (Al Busbar)- 1.0 Ampere/1 Sq.mm (IS-8623 for factory built assembly). 7)- Earthing terminal. Refer Single Line Diagram. Main LT Panel - comprising A) Incomer-1 (1000 kVA Trafo.-1 Feeder) MLTP Setion-1 Side - 1 No. (Grid Side) 1600A, FP 36kA, EDO ACB with MP Based LSIg Release + Aux contact block with On, Off, Trip & R,Y,B indication lamps, 3x metering CTs, Digital Meter (Load Manager), with RS 485 connection, with 2A SP MCB, for connection of LVM (Further sensing given to DG Sync.) with 32A TP MCB, for sensing given to RTCC panel B) Incomer-2 (1000 kVA Trafo.-2 Feeder) MLTP Setion-2 Side - 1 No. (Grid Side) 1600A, FP 36kA, EDO ACB with MP Based LSIg Release + Aux contact block with On, Off, Trip & R,Y,B indication lamps, 3x metering CTs, Digital Meter (Load Manager), with RS 485 connection, with 2A SP MCB, for connection of LVM (Further sensing given to DG Sync.) with 32A TP MCB, for sensing given to RTCC panel C) Incomer-3 (From DG Sync. panel) MLTP Setion-2 Side - 1 No. (DG Side) 1000A, FP 36kA, EDO ACB with MP Based LSIg Release + Aux contact block with On, Off, Trip & R,Y,B indication lamps, 3x metering CTs, Digital Meter (A,V,kWh), with RS 485 connection, D) Bus-coupler 1600A, FP 36kA, EDO ACB with MP Based LSI Release + UV release with Aux contact block with On, Off, Trip indication lamps with Electrical & Mechanical interlock between Grid side & DG Side swichgear along with Bus-coupler (as indicated in the SLD) E) Bus-bar 1600A TPN Al Busbar, 36kA, 415V, 50Hz F) Outgoings (MLTP - SECTION-I) 2 Nos. 1600A, TPN, 36kA, EDO ACB with MP Based LSIg Release + Aux contact block with On, Off, Trip & R,Y,B indication lamps, 3x metering CTs, Digital MFM Meter (EM-6436), with RS 485 connection, 1 Nos 160A, TP MCCB - 36kA, with TMR based LS Release, with ON, OFF, TRIP & R,Y,B indication lamps, 3x metering CTs, Digital MFM Meter (EM-6436) with RS 485 connection G) Outgoings (MLTP - SECTION-II) 3 Nos 630A, TP MCCB - 36kA, with MP based LSI Release, with ON, OFF, TRIP & R,Y,B indication lamps, 3x metering CTs, Digital MFM Meter (EM-6436) with RS 485 connection 2 Nos 315A, TP MCCB - 36kA, with TMR based LS Release, with ON, OFF, TRIP & R,Y,B indication lamps, 3x metering CTs, Digital MFM Meter (EM-6436) with RS 485 connection 4 Nos 250A, TP MCCB - 36kA, with TMR based LS Release, with ON, OFF, TRIP & R,Y,B indication lamps, 3x metering CTs, Digital MFM Meter (EM-6436) with RS 485 connection 1 No 100A, TP MCCB - 36kA, with TMR based LS Release, with ON, OFF, TRIP & R,Y,B indication lamps, 3x metering CTs, Digital MFM Meter (EM-6436) with RS 485 connection

DG Sync. Panel - comprising Incomer DG-01 Feeder -1 No. FP 1250 A- EDO ACB-36kA, LSI Protection with ON, OFF, TRIP & RYB indication lamps, 3x metering CTs, MFM(EM6436) with RS 485 connection,with RPR & REF Relay. DG-02 Feeder -1 No. FP 1250 A- EDO ACB-36kA, LSI Protection with ON, OFF, TRIP & RYB indication lamps, 3x metering CTs, MFM(EM6436) with RS 485 connection,with RPR & REF Relay. Synchronizing Relay System for Synchronization of 2 Nos 625 kVA DG Sets for Parallel/ Load sharing application Bus- Bar 2200A TPN Al Busbar, 36kA, 415V, 50Hz Out going - 1 No. FP 1600 A- EDO ACB-36kA, LSIg Protection with ON, OFF, TRIP & RYB indication lamps, 3x metering CTs, MFM(EM6436) with RS 485 connection (Connection to Asha Niwas Block). 1 No. FP 1000 A- EDO ACB-36kA, LSIg Protection with ON, OFF, TRIP & RYB indication lamps, 3x metering CTs, MFM(EM6436) with RS 485 connection (Connection to Substation Main LT Panel)

Supplying and erecting 250 kVAr APFC Panel, 3 phase, 50 Hz., capacitor duty contactor with de-latching mechanism microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

Supply, Installation, Testing & Commissioning of Indoor Switch Tripping Unit 30 V DC 65/100 AH C10 comprising automatic mode changeover FC-BC charger for charging & constant auxiliary load. Automatic FC shall be 80% to 115%-CVC at 0.1C,Automatic BC shall be 80% to 135%-CC/CV at 0.3C, built in transformer-full wave-6 pulse thyristorized, with protection /indications /metering /switching, 2mm CRCA sheet/epoxy coated to RAL 7032, conforming to IS 4540/IEC146.

Distribution Boards and accessories Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Triple pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying, erecting & marking TP MCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

LT BUSDUCT

Supply ,Installation,Testing & Commisioning by suspension on ceiling/along the wall/or mounted on ground with rigid supports following Sandwitch Type Bus Trunking for use on 3 phase 4 wire 415 volts, 50 Hz A.C. supply with metal clad enclosure having IP-54 rating with rain protection canopy with all required accessories, made of 2.0 mm thick steel sheet duly powder coated in conveninet sections complete with 4 no.s aluminium bus bars,necessary joints,elbow joints & expansion joints and bends, copper flexible for joints, contionus earthing with 2 Nos. aluminium strip of suitable size (one on each side) including,G.I. Clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system, exclusive of phase cross over etc. as required. 1600 amps 50 kA SC for 1 Sec

LT CABLES

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

LT CABLE END TERMINATIONS: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 185 sq. mm (57mm)

3½ X 240 sq. mm (62mm)

3½ X 300 sq. mm (70mm)

4 X 16 sq. mm (28mm)

POINT WIRING, SWITCH SOCKETS & ACCESSORIES

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX150mm)

6 Module (200mmX75mm)

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 375/380 mm. 1400 RPM complete erected in position as per specification no. FG-FN/EXF

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

INTERNAL & EXTERNAL LIGHTING FIXTURES & ACCESSORIES

Supplying and erecting LED Flood light fitting of 70- 80W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/ FLS-2

Supply ,Installation,Testing & Commisioning of batten type LED 36 Watt-40 Watt (Capsule Type - IP-65) or equivalent wall mounted light fitting which is ready to use and shall have below features -Electronic Ballast -Surface/Ceiling mounted, -Hanging Provision, -Weld free CRCA Powder Coated/ Polycarbonate Housing, -Anodised alumunium reflector -CRI>80,THD<10% -Luminaire with heat Sink, -Uniform Glare,non yellowing -In built electronic LED driver -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -High Efficiency atleast greater than or equal to 100 lumen per Watt.

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/ FLS-2.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OHPL/ OPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OHPL/ PBKT

MISC. ITEMS

Supplying & laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

ANALOG TELEPHONE SYSTEM

Supplying, installing, testing & commissioning approved type Push Button Analaogue Telephone Instrument with caller ID for desk top/ wall mount unit as per specification in approved manner.

Supplying, erecting and commissioning Junction Box (IDF) suitable for 10 pairs as per specification no. WG-TW

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Telephone socket outlet

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying & erecting telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

FIRE DETECTION & ALARM SYSTEM

Supply,Installation, Testing & Commissioning of addressable, UL listed, Photoelectric smoke detector with Heat element (57Deg C), 0.5% to 2.35% per foot obscuration, loop powered, class A wired, low profile, temper resistant, low quiescent current, 360Deg View LED, Rotary/DIP decimal address setting switch, 24V DC(15-32V), suitable for below & above false ceiling, complete with Base, wiring box, In/Out cable glands

Supply,Installation, Testing & Commissioning of addressable, UL listed, Manual Call Point, loop powered, class A wired, low profile, temper resistant, low quiescent current, Polling LED, Rotary/DIP decimal address setting switch,24V DC(15-32V), suitable for surface / recess installation, wiring box, In/Out cable glands

Supply,Installation, Testing & Commissioning of addressable, UL listed, Fault Isolator, suitable for 25 devices in between, loop powered, using only one address,class A wired,low quiescent current, Polling LED, Rotary/DIP decimal address setting switch,24V DC(15-32V), suitable for mounting in junction box, wiring box, In/Out cable glands

Supply,Installation, Testing & Commissioning of addressable, UL listed, Hooter & flashing strobe,loop powered (or separately powered in which the price shall be inclusive of control module & monitored power supply & 2Cx1.5 Sqmm YY cable), class A wired, adjustable candela, adjustable volume & tone,24V DC(15-32V), suitable for mounting on wall/ceiling, wiring box, In/Out cable glands

Supply,Installation, Testing & Commissioning of addressable, UL listed, Control Module for switching power supply to hooter & strobe, loop powered, class A wired, low quiescent current,Rotary/DIP decimal address setting switch,24V DC(15-32V), suitable for surface / recess installation, wiring box, In/Out cable glands

Supply,Installation, Testing & Commissioning of SLC Twin shielded pair, twin twisted 1.5 Sqmm copper stranded per pair, each wire PVC insulated, armoured, overall FRLS sheathed cable in surface/recessed,on trays, in steel /PVC conduit of approprrite size including connection etc. complete as required

Supply,Installation, Testing & Commissioning of 2Cx 1.5 Sqmm, copper conductor, PVC insulated, armoured, overall FRLS sheathed cable to IS 1554/IS 7089, in surface/recessed,on trays, in steel /PVC conduit of approprrite size including connection etc. complete as required

FIRE EXTINGUISHER

Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.

Supplying & installing of 9 Liters Mechanical Foam based Portable Fire extinguisher, 15 bar working / 35 bar Test, 6 M throw, 30/60 second discharge time, first charge, nozzle, horn, carrying handle, confirming to IS 13386, portable at appointed location on wall/ column mounted brackets, clamps & other accessories. Refer Technical Specifications

Supplying, Installing, Testing and Commissioning of 50 liters mechanical foam type trolley mounted fire extinguisher trolley mounted, 15 bar working / 30 bar Test, 10 Meter jet, 40/180 second discharge time, complete all accessories such as hose, nozzle, horn, carrying handle, first charge etc. conforming to IS 13386 (DG area) Refer Technical Specifications

SIGNAGES

Supplying & fixing of signage’s of sizes 100 mmx100 mm , made of acrylic sheet with 1 mm thick with auto glow painting complete in all respects , at all revelent places for below list. Fire Extinguisher

OM POWER SYSTEMS

EVERCREST PROJECTS PVT LTD.

JYOTI ELECTRO SYSTEMS PVT LTD

MEGHA ELECTRICAL SERVICES

Kalpaka Power Control

Nutanvij electricals

ARHAN POWER PVT LTD.

Daanish Electricals and Sales Pvt. Ltd.

Abha Electricals