CWE/GGN/GT-40/2021-22 CERTAIN MISC REPAIR OF HARD STANDING, BOUNDARY COMPOUND WALL FENCING, ROOF TREATMENT, REPAIR TO SEWAGE LINE ETC AT SF STN NARAINA UNDER GE AF GURGAON

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate) as in foundation or sub base and mass concrete etc complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:2:4 type, B1 using (20 mm graded stone aggregate) as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick rendering on fair faces of brick or concrete surface including finishing the surfaces even and smooth without using extra cement in cement mortar 1:4 with using Water proofing compound @ 3% by wt of cement etc complete all as specified and as directed by Engr-in-charge. Nots : WPC shall be measured and paid seperately

Supply only integeral water proofing compound complete all as specified and as directed by Engr-in-charge.

M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed by Engr-in-charge.

M&L for 25mm thick PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in sub base of floor tiles complete all as specified and as directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for bedding of tiles complete all as specified and as directed by Engr-in-charge.

M&L for Machine pressed precast concrete design interlocking paver block any shape and size confriming to IS 15658-2006 of 60mm thickness , M-35 grade with Grey Cement and no pigment complete all as specified and as directed by Engr-in-charge. (Sand cushion will be measured and paid seprately).

All as per item 16.0 herein before but except paver block.

M&L for sand cushioning including watering and consolidations etc complete all as specified and as directed by Engr-in-charge.

M&L for chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed by Engr-in-charge.

Dismantling of granite tiles/ wall clading tiles including cement motrar bedding cement mortar bedding (but not backing ) removing serviceable stone to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge.

M&L for 15mm thick in cement mortar 1:4 as backing coat coat of wall cladding etc complete all as specified and as directed by Engr-in-charge.

M&L for granite (of any type) stone slab 18 to 20 mm thick machine cut and machine polised, as in Dado , skirting, etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and as directed by Engr-in-charge.

Demolition of mud phuska from roof including taking down the earth from roof down from building including plastering/ roof paddings if any complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster without aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over and inluding a tack coat of bitumen primer @ 0.30 Kg per Sqm as per manufacturer's instructions of APP modified membrane sheet complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick rendering in CM 1:4 on roof top of concrete surface including finishing the surfaces even and smooth without using extra cement with water proofing compound as per manufacture instruction etc. complete all as specified and as directed by Engr-in-charge. Note: WPC shall be measured and paid seperately.

M&L for cement concrete type 1:2:4 , B-1, (using 12.50 mm graded stone aggregates) avg. 50 mm thick as in roof padding finishing surface even and rough complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:2:4 tpye B-1 using 20mm graded stone aggregate as in copping, benching, gola and the similar items complete all as specified and as directed by Engr-in-charge.

Taking down plaster of any description on brick or stone walls etc. including raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins , fascias, chajjas, parapets etc. and finishing the surfaces even and fair without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing the surfaces even and fair without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plastered surfaces and applying two coats of Apex Paint (Camouflage paint) as approved pattern over a coat of primer (Manufactured by Asian Paints or weather shield Manufactured by M/S Dulux) complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered or unplastered surfaces of walls/ ceiling and applying two coat of cement base paint over a coat of primer over a layer of wall care purtty complete all as specified and as directed by Engr-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of paris etc and thereafter applying two coat of Cement base paint complete all as specified and as directed by Engr-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer over a layer of wall care putty for smooth finish complete all as specified and as directed.

All as per item 36.0 herein before but on surfaces of ceiling.

M&L for Complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coats of Apex Paint (Camouflage pattern) over a coat of primer (Manufactured by Asian Paints or weather shield Manufactured by M/S Dulux) complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge.

S&F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-W (Gde E- 250) quality A complete all as specified and as directed by Engr-in-charge.

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and as directed by Engr-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws complete all as specified and as directed by Engr-in-charge.

Dismantling of fencing posts or struts (wood, steel RCC) any section, posts embeded in cocrete, brick work, masonry etc, including taking out embeded portion and making good distrubed ground complete all as specified and as directed by Engr-in-charge.

S&F Mild steel work as in posts and struts in fencing as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-charge.

S&F re-inforced punched concertina coil of 900 mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/ clips for tying at crossing etc complete all as specified and as directed by Engr-in-charge.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters buttreses columns, pillars, boundry pillars and posts and like for fixing of angle iron on top of boundry wall , including form work complete all as specified and as directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed by Engr-in-charge.

Supply only MS galvinised chain link fencing any size and any type wieght of 4.0 Kg per Sqm complete all as specified and as directed by Engr-in-charge.

S&F Mild steel 5 to 10 mm dia screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and as directed by Engr-in-charge.

Dismantling of old PVC (SWR) pipe upto to 110mm dia bore, laid in trenches and wall etc complete all as specified and as directed by Engr-in-charge.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed by Engr-in-charge.

S&F 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and as directed by Engr-in-charge.

S&F in repair 75mm dia CI floor /nahani trap with grating CP including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-charge.

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed by Engr-in-charge.

M&L for cutting to existing manholes for connecting new drain pipe of internal dia 150 mm making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and as directed

Dismentling of existing barbed wire/ fencing complete all as specified and as directed

Dismentling of Polycorbonate sandwitch type sheets

S&F 6.00 mm thick polycorbonate sandwitch type sheets in semi circle shape on roof of desired colour and fixed with aluminium metal flat/ angle/tee section including rubber beadig and silicon water proofing sealent jell for joining the sheets and self tightening screws of reputed quality and make complete all as specified and as directed

M&L for clip in any type Armed Sterong powder coated 0.5 mm thick ceiling with GI frame made up of standard tee, angle or any other section as in grid type ceiling frame work as approved by GE. Ceiling shall be hanged to roof truss/ purlin rafter with the help of GI wire not less than 4 mm dia at an interval n exc 1 mtr the size of mettalic powder coated ceiling tile 600x600 mm size complete all as specified and as directed

Supply and fixing in repair snap grid ceiling with 4mm thick E-board of approved size 60 CM x 60 CM supproted on and including aluminium alloy anodised angle 25 x 25 x 1.5 mm at edge and tee section 25 x 38 x 1.5mm at edges and edges placed both ways at a spacing 60 CM center to center including necessary aluminium alloy anodised cleats and 3mm dia GI wire suspenders fixed to ceiling not exceeding 120cm center to center both ways complete all as specified and as directed

Dismantling of expendal metal, fencing any thickness or mesh , fixed with steel or wood post.

Cleaning of bloakage of 'S' trap , 'P' traps, 'floor traps' 'Gully traps, 'Nahani traps and WC etc. without disturbance of existing system and removal of all blockage by manually or machanically and making fully fuctional at any location & at any floor, under area covered by AF station Issapur etc. complete all as specified and as directed.

Desluging of manholes manually by removing all scales, loose materials and sludge and cleaning the same with water sludge taken out from camp area depth of manholes not exc 1.00 Mtr and removing sludge in covered containers away from the camp area complete all as specified and as directed.

complete all as per item No 100 herein before but depth of manholes exc.1 Mtr and not exc. 3.00 Mtr.

complete all as per item No 100 herein before but for 25 users of septic tank.

Cleaning and desludging of existing sewage line of 150 mm to 200 bore and depth up to 3.00 Mtr from man holes /GT to man holes incl gully traps complete deslufging by means of machanical by or manual rodding by blocking the 1st man hole and taking all sludge to the next manhole and taking out sludge finally cleaning the line from clean water complete all as specified and as directed.

Dewatering of soak well 2.40 Mtr dia and 6 Mtr depth complete all as specified and as directed.

Demolition of cement concrete (reinforced) in any description and in any postion not other wise otherwise specifically provided for complete all as specified and as directed.

Demolition and breaking of dain pipes (SGSW , AC or reiforced concrete ) set in cement mortar for 200mm internal dia of pipe complete all as specified and directed.

Demolition and breaking of dain pipes (SGSW , AC or reiforced concrete ) set in cement mortar for 150mm internal dia of pipe complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipe up to 100 & 75mm dia, jointed in cement mortar and taking out trenches if reqired etc complete all as specified and directed by Engineer-In-Charge

Excavation in trenches n.exc 1.50mtr wide and 1.50mtr in depth for foundation etc or for shafts, wells cessipts, manhole etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr deth and getting out in soft /loose soil complete all as specified and directed by Engineer-In-Charge

M&L for cement concrete type B-1 (1:2:4) with using 20mm graded stobe aggrgates) as in surface channels and drains complete all as specified and directed by Engineer-In-Charge

Supply & Fixing in repair of SFRC manhole/ drain cover cover 75mm thick factory made medium of the size as per site requirement including 75x1.5mm flat iron frame all arround the cover complete all as specified and as directed.

S&F for bends, straps, support or stay clams rungs, handles, hook and similar small articles, confirming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-In-Charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and directed by Engineer-In-Charge

M&L for RCC NP-3 drain pipe 150 mm internal dia laid in trenches and jointed in CM (1:1) and tested complete all as specified and directed by Engineer-In-Charge

Ditto all as per item No 75 above but 200 mm dia

M&L for concrete bed to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 etc complete all as specified and directed by Engineer-In-Charge

Complete all as item No 77 herein before but 200 mm dia

S&F for 100 mm dia of cast iron soil, waste and vent pipe in any length with or without ears with cement joints laid and fixed to wall etc complete all as specified and directed by Engineer-In-Charge

Complete all as item No 79 herein before but 75 mm dia

S&F for 100 mm dia of cast iron bend (any radius) with duct foot or heel rest etc complete all as specified and directed by Engineer-In-Charge

Ditto all as per item No 81 above but 75 mm dia

Returning filling in, with soil inlcuidng spreading, levelling, watering and well ramming in layers not exc 25 cm thicks

Removing excavated soil/ building material/debries to a distance exc 1.km mtr but not exceeding 5kM mtr and depositing where directed etc complete all as specified and directed by Engineer-In-Charge

M&L preparation of old French polishing surfaces of any description , in width or girth and applying a coat of French polishing including wood filler , complete all as specified and as directed.

Taking down carefully old copper/aluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fitting etc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as specified and as directed by Engr-in-charge.

Taking down old unserviceable main switch, DB's/RCBOs/MCCB/Sheet Metal Enclosures including MCBs & wooden/GI/MS sheet board etc and removing materials from the site of work complete all as specified and as directed by Engr-in-charge.

Taking down old unserviceable sub main wiring any size/ core/ type of copper/ alluminium conductor. including making good the disturbed surfaces and removing materials from the site of work complete all as specified and as directed by Engr-in-charge.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including PVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed by Engr in Charge.

(a) One light point controlled by one way switch.

(b) One celling/exhaust fan point controlled by one switch one way

(c) One socket out let 5 Amps 5 pin on independent board

(d) One socket outlet 5 Amps 5 Pin on same board with other switches

(e) One bell/buzzer point controlled by one bell push on independent board

S&F of switch piano, flush type, 5 amps, single pole, one way

S&F of socket outlet 2in1, 3 pin 5 Amps flush type

S&F of socket outlet 2in1, 6 pin 15/5 Amps flush type

S&F of switch piano, flush type, 15 amps, single pole, one way

S&F of ceiling rose surface bakelite two to three terminals.

S&F of bell push , 5 amps, single pole, one way.

S&F in replacement of call bell, Ding dong type, 230 volts AC single pole complete all as directed by Engr in Charge.

S&F of ceiling fan regulator stepped electronic type 300 watt rating all as directed by Engr in Charge.

S&F of modular switches 6 amps single pole one way

S&F of modular switches 16 A single pole one way

S&F of modular socketes out let 6 amps 5 pin

S&F of modular socket out let 6-16 A 3 pin combined shuttered

S&F in replacement of modular white cover plate with frame 3 modular

S&F of Flush metal boxes 3 modular

S&F of modular white cover plate with frame 6 modular

S&F of Flush metal boxes 6 modular.

S&F of modular white cover plate with frame 12 modular

S&F of Flush metal boxes 12 modular.

S&F in replacement of MCB distribution board vertical triple pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 415 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified by Engr in Charge.

S&F in replacement of MCB distribution board triple pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 415 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed by Engr in Charge.

S&F in replacement of MCB distribution board single pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed by Engr in Charge.

S&F in replacement of MCB distribution board single pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 100 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed by Engr in Charge.

S&F in replacement of MCB SPN 63 Amps, 10 KA,240V, 50Hz, 'C' Series complete all as specified and as directed by Engr in Charge.

S&F in replacement of Casing capping double lock type supper quality size 15 mm width ISI marked with fixing accessories complete all as specified and directed by Engr in Charge.

S&F in replacement of rigid non metalic PVC medium grade conduit of 15 mm bore including boxes, tees,bend and fixing accessories such as copper,lock nut, saddles,pipe huck etc complete all as specified and directed by Engr in Charge.

Complete all as item No 114 herein before but for 20 mm bore.

S&F in replacement of flexible conduit of size 25 mm complete all as specified and directed by Engr in Charge.

Supply and Fixing in replacement of LED Decorative post-top for 360 degree indirect light IP-65 grade of proterction with High power LED of 40 watt with resistance to impact and corrosion. Glare free and better uniformity.Milky version .complete all as specified and as directed by Engr in Charge. Note : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor.

S&F in replacement of sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug with one SP MCB 20 Amp 240 volt complete all as directed by Engr in Charge.

S&F in replacement of in replacement of of PVC insulated unsheathed cable, single core multi stranded copper conductor, 1100 volts for the following cross sectional area:

(a) 1.5 Sqmm

(b) 2.5 Sqmm

S&F in replacement of PVC gang box suitable for one switch and socket 5 Amps complete with screw and necessary arrangement complete all as specified and directed by Engr in Charge.

ditto but suitable for one switch and socket 15 Amps

S&F in replacement of heating element 1500/2000 watt capacity triangular type complete .

S&F in replacement of thermostate suitable for storage type water heater complete .

Supply and fix stainless steel tank for 25 ltr storage type water heater complete .

Supply and fix Copper tank for 25 ltr storage type water heater complete .

M&L of desert cooler body made out of 18 gauge sheet and GI grills complete including dismantling of exhaust fan tullu pump with accessories from existing rusted desert cooler and fixing at new body complete including wiring connection PVC pipe connection with accessories

M&L for rewinding of fan motor of desert cooler with super enameled copper wire of existing gauge complete all as specified and directed by Engr in Charge.

M&L for replacement of bushes /bearing of fan motor of desert cooler complete all as specified and directed.

Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 15 mm dia bore complete all as specified and directed by Engr-in-Charge.

Supply & Fix in replecement of Bib taps CP

Supply & Fix in replecement of Stop Cock CP.

S&F MCCB 200 A ,3 pole ,36 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

S&F MCCB 100 A ,3 pole ,16 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing in replacement of Exhaust fan 300 mm sweep 230 Volt plastic body type complete all as specified & directed by Engr in Charge.

M& L for grouting of fastener (screw type ) ,washer ,bolt in wall for geyser/ Exhaust fan complete all as specified and directed by Engr in Charge.

S & F in replacement of Copper Cable lugs/Thimbles upto size 10 sqmm complete all as specified and directed by Engr in Charge.

M&L for submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 6.0 sqmm + 1x 6.0 sqmm wire complete all as specified and as directed by Engr - in - charge.

M&L for submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 2.5.0 sqmm + 1x 2.5 sqmm wire complete all as specified and as directed by Engr - in - charge.

M&L for submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 4.0 sqmm + 1x 4.0 sqmm wire complete all as specified and as directed by Engr - in - charge.

Net Contract Sum will be after deducting Sch of Credit of Rs 69,098.00

LAXMI BUILDERS