REPAIRS TO ROAD FURNITURE INFORMATORY SIGN BOARD AND MISC WORK IN TECH AREA AND DOMESTIC AREA AT AF STN UTARLAI

Amount

S&F in repairs road studs GB733 (B) (100X100X 19mm) made of ABS materials two reflectors are fitted in body. The road stud is dynamically designed so that it can bear load up to 25 Tons and its impact strength is about 253 KN weight of stud is 130 gms. Approx body available in Red/White/ Yellow colour available with swareflex beads also. complete all as specified and directed. Make:- Dark eye or equivalent of TATA BP/Gogia Plastic/Red Safe/Froniter.

S&F in repairs retro reflective road delineator made of ABS plastic body having two 100 mm dia circular reflectors & two rectangular reflectors of 70mm x 23 mm fixed on both sides of 1000 mm long MS pipe 50mm dia fully powder coated guide post to fixed with screws/embeded in concrrete PCC 1:2:4 type B-2 usuing 40 mm graded crusted stone aggregate having size 20cm x 20cm x 20cm complete all as specified and directed. Note:- Reflector shall be covered with 4mm dia galvanised wire of mesh size 100 x150mm . Make:- Dark eye or equivalent of TATA BP/Gogia Plastic/Red Safe/Froniter.

S&F in repairs retro reflective road delineator made of ABS plastic body having two 100 mm dia circular reflectors fixed on both sides of 1000 mm long MS pipe 50mm dia fully powder coated guide post to fixed with screws/embeded in concrrete PCC 1:2:4 type B-2 usuing 40 mm graded crusted stone aggregate having size 20cm x 20cm x 20cm complete all as specified and directed. Note: Reflector shall be covered with 4mm dia galvanised wire of mesh size 100 x150mm . Make:- Dark eye or equivalent of TATA BP/Gogia Plastic/Red Safe/Froniter.

Supply and fixing in repairs Road Safety Convex Mirror 100 cm dia Model No OS-789 of make Oscar or equivalent make including stand/padestal embedded /fixed in to concrrete PCC 1:2:4 type B-2 usuing 40 mm graded crusted stone aggregate having size 45x45x60cm and necessary earth and form work.complete all as specified and directed by Engr-in-Charge. Make:- Dark eye or equivalent of TATA BP/Gogia Plastic/Red Safe/Froniter.

Dismantling of old / brocken cautionary mandatory and information sign boards of any size, any position and any description including frame work embedded in ground or PCC, complete as as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming with earth around, in layers not exceeding 25 cm complete all as specified.

M&L for providing cement concrete in foundation filling and mass concrete 1:2:4, type B2 (using 40mm graded aggregare), complete all as specified and directed.

S&F framed work such as cautionary mandatory and information sign boards and similar work con- forming to stainless steel grade 304, complete all as specified and directed.

S&F retro reflective cautionary mandatory and information sign boards as per IRC 67 made of high intensity reflective grade sheeting fixed over aluminium sheet 1.5mm thick, including writing letters(computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shade incl making arrow/sign, border and logs,complete all as specified and directed. Note: The rate of 1.5 mm thick aluminium sheet shall be included in this items.

S&F MS Framed work such as cautionary mandatory and information sign boards, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel anging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and similar work structural steel con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F retro reflective cautionary mandatory and information sign boards as per IRC 67 made of high intensity reflective grade sheeting fixed over 6mm thick acrylic sheet with high grade adhsive , including writing letters(computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shade incl making arrow/sign, border and logs,complete all as specified and directed. Note: The rate of 6 mm thick acrylic sheet sheet shall be included in this items.

S&F in repairs retro reflective informatory sign board as per IRC 67 made of high intensity reflective grade sheeting over exisiting sheet including Ist quality adhiesive etc. and writing letters (computerized cutting) in any nos, any size with reflective micro prismatic tape in any colour shade , making arrow, sign and logs with same material, all as specified and directed.

M&L for preparation of new steel surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide , complete all as specified and directed

M&l for applying one coat of synthetic enamel paint incl preparation of old concrete surface complete all as specified and directed

Dismantling of Brickwork or PCC block/stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate set in cement mortar 1:4 in kerb stone with plain fair faces, including necessary earth work, complete all specified and directed

M&l for applying two coats synthetic enamel paint over a coat of primer incl preparation of new stone /concrete surface complete all as specified and directed

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal from site exc. 50 m complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations,filling and mass concrete, path/floor and incl use of waste of form work and finishing the surface rough to receive the topping layer or tiling complete all as specified.

Dismantling of stone stabs, tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as and directed.

M&L for 60 mm thick, M-35 Machine pressed precast interlocking paver block any shape and size confirming to IS 15658-2006 fixed with cement and no pigment glossy finish coloured as approved by GE. and laid over and including sand cushioning 40 mm thick & ends to be closed with PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as site reqd to filing the gaps between tiles and road edgs complete all as specified and directed.

M&L for marking 2.5mm thick centre line , side line, stop line, dashes, arrows, brackets & similar work on road surfaces as per IRC pattern with thermo plastic paint of approved quality & make with 8% glass beads laid at temperature of 160 degree centigrate with a special applicator machine complete all specified and directed.

S&F in repair solar road studs made out of aluminium housing and precast construction solar powered by SEIMENS monocrystal solar panel 2W 120mA type of battery NI-CD 1.2 volt 2500m AH & flash rate 2Hz or 70Hz view distance over 300mtr. Fitted with 2Hz EL-805-3 pieces each side on two ends total 6 pieces LEDs, flashing upto 12 Hrs of light at night and solar battery automatically charged in day/ sun light duly fixed with cement and hardener. 125 x 125 x 25mm in red /yellow colours complete all as specified and directed. Make:- Dark eye or equivalent of TATA BP/Gogia Plastic/Red Safe/Froniter.

S&F in repairs speed bumps made from heavy duty ABS high resistance wear & tear property UV stabilized black & yellow combination high reflective reflector having available on both sides in red & yellow colour with L= 500mm, W=380mm, H=50mm complete all as specified and directed. Make:- Dark eye or equivalent of TATA BP/Gogia Plastic/Red Safe/Froniter.

S&F in retro reflective informatory sign board as per IRC 67 made of high intensity reflective grade sheeting over MS black sheet 1.25 mm thick , including writing letters (computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shade incl making arrow/ sign, border and logs with same material,all as specified and directed. Note: The rate of 1.25mm thick MS sheet shall beincluded in this item.

S&F in repairs retro reflective cautionary mandatory and information sign boards as per IRC 67 made of high intensity reflective grade sheeting fixed over aluminium 1.5mm thick, including writing letters (computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shade incl making arrow, sign, border and logs with same material,complete all as specified and directed. Note: The rate of 1.5mm thick aluminium sheet shall beincluded in this item.

S&F in repairs retro reflective informatory sign board as per IRC 67 made of high intensity reflective grade sheeting over MS black sheet 1.25mm thick fixed to existing poles,frame including necessary welding/ rivete/ nut bolt etc. and writing letters (computerized cutting) in any nos, any size with reflective micro prismatic tape in any colour shade , making arrow, sign, border and logs with same material, all as specified and directed. Note: The rate of 1.25mm thick MS sheet shall beincluded in this item.

S&F in repairs retro reflective informatory sign board as per IRC 67 made of high intensity reflective grade sheeting over exisiting MS black sheet/ aluminium sheet including Ist quality adhiesive etc. and writing letters (computerized cutting) in any nos, any size with reflective micro prismatic tape in any colour shed , making arrow, sign and logs with same material, all as specified and directed.

M&l for applying one coat of synthetic enamel paint incl preparation of old concrete surface complete all as specified and directed

M&L for Stone kerb of roughly squared granite or trap stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush including necessary earth work, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations,filling and mass concrete, path/floor and incl use of waste of form work and finishing the surface rough to receive the topping layer or tiling complete .

Dismantling of stone stabs, tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as and directed.

M&L for chequered cement concrete tiles of size 300x300x22 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surface of tiles as floor with and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high per 10 Nos (per CM Height) including painting of base with white and black colour complete all as specified and directed by Engr-in-Charge.

Devi Engineeing

M/S HARIOM CONSTRUCTION COMPANY

M/S TANUSHREE CONSTRUCTION COMPANY

M/S Dharam Chand Lal Chand Jain